All Products
AI Overview
Popular hobby servos (PWM, 3‑wire)
- Small, general-purpose ~180° micro servo: Micro servo ($13.45)
- Budget 9g micro servo, 1.6 kgf·cm: 9g micro servo (1.6kg) ($7.30)
- More durable 9g metal gear micro servo, 1.8 kgf·cm: 9g Metal Gear Micro Servo (1.8Kg ) ($10.30)
- Higher torque micro option (metal gear) : Micro Servo - High Powered, High Torque Metal Gear ($25.85)
Continuous rotation servos (spin like a geared motor)
- Compact continuous micro drive: Micro Servo 9g - Continuous ($8.20)
- Micro continuous rotation (FS90R form factor): Micro 360 Degree Continuous Rotation Servo FS90R ($14.30)
- Standard-size continuous rotation: Continuous Rotation Servo [FeeTech FS5103R] ($27.05)
Feedback / special-purpose servos
- Read actual position via extra wire (analog feedback, standard size): Analog Feedback Standard-Size Servo ($33.95)
- Safer for stalls/back-driving (300° clutch servo, 6kg) : DFRobot SER0057 6kg 300° Clutch Servo ($22.10)
Smart serial bus servos (multi-servo robotics, encoder feedback)
- 7.4V, 19.5 kg·cm, 360° magnetic encoder: ST3215 Serial Bus Servo 19.5kg.cm 7.4V 360° Encoder ($44.00)
- 12V, 30 kg·cm, 360° magnetic encoder: DFRobot ST3215 12V Serial Bus Servo - 30kg.cm, 360° Encoder ($48.95)
- Matching controller for ST/SC bus servos: Serial Bus Servo Driver Board, Integrates Servo Power Supply And Control Circuit, Applicable for ST/SC Series Serial Bus Servos ($8.20)
Kits/tools for common servo projects
- Ready-to-run 2‑axis camera mount (includes servos): Mini Pan-Tilt Kit - Assembled with Micro Servos ($41.55)
- Pan/tilt bracket only (add your own servos): Unassembled Mini Pan-Tilt Kit (Without Micro Servos) ($9.95)
- Configure/test REV Smart Robot Servos: REV Robotics SRS Programmer ($65.75)
Showing 81-100 of 100 products
Servo extension cable 150mm
A 150mm servo extension cable for reaching servos mounted further from the controller than the servo's built-in lead allows. Male connector plugs into the controller, female connector mates with the servo. Also works as a standard 0.1" jumper cable for general prototyping. Specifications Lengt...
Servo extension cable 600mm (23.62)
This is a 600mm (23.62") servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Male connector on one end goes to controller, female connector mates with servo. Fits all Hitec, Futaba, JR, Multiplex, and Airtronics...
SparkFun Opto-isolator Breakout
This is a board designed for opto-isolation. This board is helpful for connecting digital systems (like a 5V microcontroller) to a high-voltage or noisy system. This board electrically isolates a controller from the high-power system by use of an opto-isolator IC. This IC has two LEDs and two pho...
Screw Shield V2 for Arduino
The DFRobot Arduino-Compatible Screw Shield is a terminal expansion board that allows you to screw in jumper wires to a screw terminal for a much stronger and secure connection for your I/O and power pins. Feel secure with this arduino-compatible screw shield. The screw shield v2 from DFRobot...
Plastic Servo Horn
This is a high quality plastic servo horn. It fits DF series servos. Made specifically for DF series servos. SPECIFICATIONS Outside diameter: 20mm(0.79") Center hole diameter: 3mm(0.12") Mounting holes: 1.5mm(0.06") DOCUMENTS Dimensions SHIPPING...
Metal Servo Horn
This is a high quality metal servo horn. It fits Hitec standard servos, DF series servos and the Uptech CDS 5500 Servo. SPECIFICATIONS Outside diameter: 20mm(0.79") Center hole diameter: 3mm(0.12") Mounting holes: M3 Weight: 2g DOCUMENTS Dimensions ...
SparkFun Wireless Motor Driver Shield
The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components to your Arduino-based project as fast and easy as possible. The heart of the Wireless Motor Driver Shield is the Toshiba TB6612FNG H-Bridge Motor Driver, which allows the shield to contro...
LG-NS Robot Gripper
How can your robot rule the world with an iron fist if it doesn't have a hand? This LG-NS robot gripper makes a great addition to a small arm or mobile base. The gripper features injection molded components and can use two standard hobby servos (not included) for open and close and wrist ro...
Pan/Tilt Bracket Kit (Single Attachment)
This is an easy-to-assemble pan/tilt bracket kit that utilizes servos to move on two axes fit for camera and helping-hand applications. This particular bracket kit is the same one we use in our SparkFun Raspberry Pi Zero W Camera Kit to create a remote camera system for your home or workplace....
JST 3 Holes Female Connector
A pack of 3-pin JST-style 2.0 mm pitch female connector housings with matching crimp pins. Ideal for making custom cables and connectors for sensors, servos, and other small electronics that use 2.0 mm pitch connectors. Specifications Connector Type – 3-pin female housing, 2.0 mm pitch Wire G...
Boson Starter Kit for micro:bit
The Boson Starter Kit pairs DFRobot's modular Boson electronic blocks with the BBC micro:bit, giving students and beginners a hands-on introduction to coding and electronics. The kit includes eight sensor and actuator modules covering sound, light, and motion interaction. Modules connect to the ...
Bionic Robot Hand (Right)
The bionic robot hand is made up of acrylic material. It consists of 5 micro metal servos, joints and one hand base. The special mechanical structure makes every finger can be controlled separately, all can move in certain range. And every finger has spring damping structure, it will protect the...
Bionic Robot Hand (Left)
The bionic robot hand is made up of acrylic material. It consists of 5 micro metal servos, joints and one hand base. The special mechanical structure makes every finger can be controlled separately, all can move in certain range. And every finger has spring damping structure, it will protect the...
![Continuous Rotation Servo [FeeTech FS5103R]](/rails/active_storage/representations/redirect/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVGkCHHtJIghwdXIGOwBUSSIMYmxvYl9pZAY7AEY=--6004bac0c43ea2c89747a25ee0dbbc83294146c4/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVHsIOgtmb3JtYXQ6CXdlYnA6EnJlc2l6ZV90b19maXRbB2kCkAFpApABOgpzYXZlcnsHOgxxdWFsaXR5aVc6CnN0cmlwVEkiCHB1cgY7AFRJIg52YXJpYXRpb24GOwBG--f55be79df1f1b025f86d676a642df617e240cfbc/image_3493915f-aadf-4f6a-9981-a3886531e9ed.jpg)
Continuous Rotation Servo [FeeTech FS5103R]
·
This servo rotates fully forward or backwards instead of moving to a position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with four different horns, as shown.To control with an Arduino, we suggest connecting the contro...
HCR(Home Care Robot) - Mobile Robot Platform with Sensors and Microcontroller
The HCR Mobile Robot Kit is a two wheel drive mobile robot platform with three levels (if you want, you can use only the parts you need, or make a two level robot). The mobile robot kit contains two motors, two wheels, an omni-directional wheel, and hardware accessories such as metal plates...
![Continuous Rotation Micro Servo [FS90R]](/rails/active_storage/representations/redirect/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVGkCRHpJIghwdXIGOwBUSSIMYmxvYl9pZAY7AEY=--d75d8a7d742d9d96e7269c23ff8107b2a7b92e5a/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVHsIOgtmb3JtYXQ6CXdlYnA6EnJlc2l6ZV90b19maXRbB2kCkAFpApABOgpzYXZlcnsHOgxxdWFsaXR5aVc6CnN0cmlwVEkiCHB1cgY7AFRJIg52YXJpYXRpb24GOwBG--f55be79df1f1b025f86d676a642df617e240cfbc/image_121a38b0-9036-4a9c-90cb-de02619b164e.jpg)
Continuous Rotation Micro Servo [FS90R]
·
Need to make a tiny robot? This little micro servo rotates 360 degrees fully forward or backwards, instead of moving to a single position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with five horns and attachment screw...
Micro Servo - High Powered, High Torque Metal Gear
·
This high-powered micro servo packs nearly double the stall torque of standard micro servos into a compact metal-geared package. With approximately 180° of rotation, it works with any standard servo library, driver, or controller — including the Arduino Servo library, motor shields, and 16-channe...
Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit
·
The Adafruit 16-Channel PWM/Servo HAT adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution — completely free-running with no Pi processing overhead. Up to 62 HATs can be sta...
Sub-micro Servo - SG51R
·
This is just about the cutest, tiniest little micro servo we could find, even smaller than the 9 gram micro servos we love so much. It can rotate approximately 180 degrees (90 in each direction) and works just like the standard kind you're used to but much smaller. You can use an...
Teensy 3.5
The Teensy 3.5 is a compact, powerful USB development board built around a 32-bit ARM Cortex-M4 processor running at 120 MHz with a hardware floating-point unit. With 512 KB of flash, 256 KB of RAM, and 64 digital I/O pins (all 5V tolerant), it packs serious capability into a small form factor. ...
