All Products
Showing 41-60 of 100 products
TT Gearbox Motor
·
The classic yellow "TT" plastic gearbox motor, in every gear ratio and lead termination we can get. Dual output shafts, 3–6VDC, and the standard TT footprint that fits every common bracket, wheel and chassis. Choose the gear ratio first The ratio decides the trade between speed and torque. It is ...
Thermoelectric Generator (TEG) Module - SP1848-27145, 40 x 40mm
·
Turn a temperature difference into electricity. Hold one side of this module against something warm, keep the other side cool, and it generates a usable voltage with no moving parts at all. It is a tidy way to show energy conversion happening on the bench, and it is the same component behind rea...
Hummingbird 2-Wire Extension
·
A one-metre extension lead for the two-wire Hummingbird parts — single-colour LEDs, gear motors and vibration motors. Worth having on hand once student builds grow taller than the standard 50cm leads allow. Fits the Hummingbird Bit and the Hummingbird Duo.
Hummingbird Light Sensor
·
An analogue light sensor on a Hummingbird lead: the brighter the light falling on it, the higher the signal voltage your program reads. Useful for nightlights that switch themselves on, sun-tracking models and any project where the robot should notice a shadow. It screws into a sensor port on the...
Hummingbird Servo Extension Cable
·
A 50cm extension lead for Hummingbird servos, for when the moving part ends up further from the controller than the standard cable allows — the head of a puppet, the top of a tower, the far end of an arm. Fits servo models HS-311, FS5103B, FS5103R and FS90, on both the Hummingbird Bit and the Hum...
Hummingbird Single Colour LED - Orange
·
Orange 5mm LED on a 50cm braided lead, built as a plug-in part for the Hummingbird robotics system rather than as a bare component. The two wires clamp into the LED terminals on a Hummingbird controller and are ready to program. Runs at 1.6V to 2.0V forward voltage with a recommended 20mA current...
HUE HD Camera - Green
·
A bendy neck, a heavy little base and a USB lead is the whole product, and that simplicity is why the HUE HD Camera has stayed on classroom equipment lists for years. Point it at a page, a model or a half-built circuit and the class sees the detail instead of crowding around one desk.Doubles as a...
Hummingbird Battery Pack
·
A 4 x AA battery holder with an on-off switch, made to power the motor supply on a Hummingbird controller. Use it when a student build needs to drive around the room instead of staying tethered to a USB lead. Works with both the Hummingbird Bit and the Hummingbird Duo. Batteries are not included ...
IPEVO VZ-R Dual Mode HDMI and USB Document Camera
·
The VZ-R is the IPEVO visualiser that doesn't need a computer. Run the HDMI output straight into a projector, monitor or interactive panel and it projects live — useful when the classroom PC is slow, locked down, or simply not there. Plug the USB lead into a laptop instead and it behaves as a sta...
Molex Cube PCB Mount GPS Antenna
·
This compact cube antenna from Molex is designed for GPS applications and surface mounting directly to a PCB. It covers a frequency range of 1.556GHz ~ 1.607GHz, making it suitable for embedded positioning projects where a low-profile board-mounted antenna is required.Electrical connectivity is v...
12k Ohm 1/4W PTH Metal Film Resistor
·
This through-hole resistor is a simple, breadboard-friendly passive component for prototyping and general electronics work. It is commonly used with breadboards and perf boards, making it handy for pull-ups, pull-downs, voltage dividers, current limiting and signal conditioning.The leads are desi...
18k Ohm 1/4W PTH Resistor
·
This through-hole resistor is a handy staple for breadboards, perfboards and general electronics prototyping. It is supplied as a single 18 kOhm metal film resistor with 1/4 watt power rating.The axial PTH format makes it easy to plug into standard solderless breadboards or solder into prototypin...
12k Ohm 1/4W PTH Metal Film Resistor
·
This is a single through-hole resistor for general electronics work, prototyping and repairs. It is well suited to breadboards and perf boards, with SparkFun noting a newer, more breadboard-friendly lead thickness than their previous version.Use it anywhere you need a simple fixed resistor in a t...
220 Ohm 1/4W PTH Resistor
·
This 220 Ohm through-hole resistor is a handy general-purpose component for breadboards, perf boards and other prototype builds.It is a 1/4 Watt PTH axial resistor with ±5% tolerance, made with carbon film construction. The leads are a more breadboard-friendly thickness than the previous version,...
22-Pin 0.5mm Pitch FPC Cable - 100mm
·
This flat flexible cable is a compact 22-pin FPC lead for joining compatible boards and peripherals where space is tight. It has a 0.5mm pitch and a 100mm length, making it suitable for short internal connections.The cable is A-B style, so pin one on one end matches pin one on the other end. Use ...
AVR ISP Programming Cable - 6-pin and 10-pin
·
This handy AVR programming cable combines the common 10-pin and 6-pin ISP programming interfaces in one lead, making it useful when your programmer and target board use different AVR ISP header formats.The cable is about 12 inches long and mates with pins on 1/10in centres, suiting standard 0.1 i...
U.FL to U.FL Mini Coax Cable - 50mm
·
This short mini coax lead links U.FL-equipped RF submodules and other RF devices to carrier boards. At 50mm long, it is designed to be long enough to make the connection while staying tidy inside compact builds.The 50-ohm impedance makes it well suited to almost all SparkFun RF products, includin...
micro:bit USB A to Micro USB Cable - 30cm Black
·
This official micro:bit-branded USB cable is a short, reliable lead for powering and programming BBC micro:bit development boards. It connects a standard USB-A port on a computer or hub to the Micro USB socket on compatible microcontroller boards.At 30 cm long, it is well suited to classroom desk...
PH2.0-4P Female-to-Female Jumper Cable 5cm - 10 Pack
·
This compact PH2.0-4P cable is a short female-to-female lead for linking modular electronics hardware without messy excess wiring. It is designed for tidy connections between sensors, actuators and controller boards in close-spaced builds.Each end has a keyed PH2.0-4P female connector to help pre...
DFRobot Gravity PH2.0 to Male DuPont Tagged Cables 30cm - 5 Pack
·
These tagged Gravity cables help keep wiring clear when a project has lots of similar-looking connections. Each lead carries I2C/UART pin labels, making it easier to identify signals during wiring, testing and debugging.The wire sequence is kept the same at both ends and follows the latest DFRobo...
