All Products
Showing 41-60 of 100 products
ACS37800 Qwiic Power Meter
·
Built around the Allegro ACS37800, this Qwiic power meter lets your project monitor voltage and current at the same time over I2C. It is designed for higher-demand loads such as 3D printers, UAVs and solar panels, with voltage monitoring up to 60VDC and current sensing up to 30A.The ACS37800 uses...
Micro Proximity Sensor - 20 cm VCNL4040 (Qwiic)
·
Built around the VCNL4040, this tiny Qwiic Micro breakout provides short-range presence detection for projects where space and weight are tight. It is designed for qualitative sensing: detecting whether an object is present within range and whether it is getting closer or moving farther away, rat...
Wind Vane
·
This wind vane is used to indicate the direction from which the wind is blowing. Inside the vane are eight switches, each paired with a unique resistor, allowing a microcontroller to read direction based on the vane’s position.As the vane rotates, a magnet closes the reed switches. In some positi...
Triple Axis Accelerometer Breakout - LIS3DH with Headers
·
Add 3-axis motion sensing to your project with this LIS3DH accelerometer breakout from SparkFun. The LIS3DH is a low-power, capacitive micro-machined accelerometer with 12 bits of resolution, suitable for detecting translation, movement and orientation in 3DoF applications.The breakout is easy to...
A111 60GHz Pulsed Radar Breakout
·
Bring 60GHz radar sensing into your project with the Acconeer A111 single-chip pulsed coherent radar sensor on a SparkFun breakout board. It is suited to high-precision distance measurement, and also supports gesture, motion, material and speed-detection applications at distances up to two metres...
MicroMod Asset Tracker Carrier Board - SARA-R510AWS
·
This MicroMod carrier board is built around the u-blox SARA-R510AWS module and AWS IoT ExpressLink, giving your MicroMod processor a simpler path to secure AWS cloud connectivity over LTE-M. Please note that this module accepts the simplified AWS IoT ExpressLink AT command set; the regular u-blox...
Ideal Diode Breakout
·
Keep your project powered through power-supply hot swaps with this compact ideal diode breakout from SparkFun. It provides reliable one-way voltage control for dynamic power selection and switchover, over-voltage protection, and designs that need a stable power input.The board breaks out four cha...
Thing Plus RP2350 Wireless Development Board
·
Build connected sensor nodes, data loggers and battery-powered IoT projects around Raspberry Pi’s RP2350 microcontroller. This Thing Plus board adds wireless connectivity, extra memory and the familiar Feather-compatible footprint in a compact development platform.The RP2350 can run two selected ...
Thing Plus RP2350 Wireless Development Board (Ding & Dent)
·
This Thing Plus board is a wireless development platform built around the Raspberry Pi Foundation RP2350 microcontroller. It combines the familiar Thing Plus form factor with Qwiic expansion, a µSD card socket, USB-C, LiPo charging hardware and a fuel gauge for local or remote projects.The RP2350...
Qwiic Alphanumeric Display - Pink
·
Add bright pink letters, numbers and symbols to your project with this Qwiic alphanumeric display. Its fourteen-segment digits give you far more flexibility than a standard seven-segment display, making it useful for status readouts, short labels, timers and compact user interfaces.The board uses...
Qwiic MultiStar Constellation Ornament
·
Need more Qwiic ports without forcing every board into a single daisy chain? This star-shaped Qwiic MultiStar acts as a hub for the I2C bus, adding four extra usable Qwiic ports to a board that only has one.The board has five Qwiic connectors in total. One connects back to your main board, leavin...
MicroMod STM32F405 Processor Board
·
This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...
Inventor's Kit for MicroPython - KIT-29326
·
Start learning embedded electronics with a complete MicroPython kit designed for beginners. It guides you from blinking your first LED through to building and programming an autonomous robot, with no prior programming or electronics experience required.The kit is built around MicroPython, a begin...
LIS3DH Triple Axis Accelerometer Breakout (Qwiic)
·
Add motion sensing to your project with this Qwiic-enabled LIS3DH breakout. The LIS3DH is a smart, low-power, three-axis capacitive micro-machined accelerometer with 12-bit resolution, suited to translation, motion, orientation and tap detection.This board is classified as a 3DoF, or 3 Degrees of...
Qwiic Directional Pad (PRT-26851)
·
Add five-way navigation input to an I2C project without building a button matrix from scratch. Press up, down, left, right or centre on the low-profile directional pad to send button input to your microcontroller.The board uses a PCA9554 8-bit I2C I/O expander to read the momentary buttons, with ...
Ethernet Adapter for Teensy 4.1
·
This adapter makes it straightforward to add a wired Ethernet connection to a Teensy 4.1. It brings the functionality of the Ethernet Kit for Teensy 4.1 onto a single board, helping you get a network-capable setup together with less assembly.The tricky parts are already taken care of, with the RJ...
AgXRP Pump & Soil Moisture Sensor Expansion Pack (Beta)
·
Add another automated planting zone to your AgXRP setup with this expansion for the AgXRP Starter Kit. It lets students and educators add a second pump and soil moisture sensor, so they can water a second plant independently and compare soil conditions or watering schedules side by side.The pack ...
SparkFun Micro 6DoF IMU Breakout - LSM6DSV16X (Qwiic)
The SparkFun Micro 6DoF IMU Breakout features the STMicroelectronics LSM6DSV16X — a high-performance, low-power 6-axis IMU with a 3-axis accelerometer and 3-axis gyroscope. Its triple-core architecture processes data on three separate channels (UI, OIS, EIS) with dedicated configuration, processi...
SparkFun Thing Plus - ESP32 WROOM (USB-C)
The SparkFun ESP32 WROOM Thing Plus is a Feather-compatible development board built around Espressif's ESP32-WROOM module, featuring USB-C, integrated Wi-Fi and Bluetooth, a microSD card slot, LiPo battery management with fuel gauge, and a Qwiic I2C connector for plug-and-play sensor expansion. ...
SparkFun microSD Sniffer
The SparkFun microSD Sniffer lets you tap into the SPI traffic between a microSD card and its host device for debugging or reverse engineering. Insert one end into a standard microSD socket and plug a microSD card into the onboard socket — all SPI signals are then broken out to an 8-pin 0.1″ pitc...
