All Products
Showing 1-20 of 52 products · 8 unavailable products hidden
Straight Male Header - Gold Plated, PTH, 0.1in, 24-Pin
·
This is a single-row strip of straight male breakaway header pins, useful for adding standard through-hole connections to development boards and maker projects.The header uses standard 0.1" (2.54mm) spacing and comes in a 24x1 format. This size is normally used with Teensy 3.5, Teensy 3.6 or Teen...
Straight Male Header - 14 Pin, Gold Plated, 2.54mm
·
This is a single-row straight male header with 14 breakaway pins on standard 0.1 inch (2.54mm) spacing. It is suited to through-hole prototyping, module headers and breadboard-friendly maker projects.The 14x1 format is commonly used with Teensy 3.2 and Teensy 4.0 boards. If you are fitting header...
Teensy Header Kit
These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield board. This kit includes five headers (two 13-pin, one 7-pin, one 3-pin, and one 2x...
Teensy to Arduino R3 Shield Adapter
·
This passive adapter lets a Teensy development board connect to the standard Arduino 1.0 (R3) shield footprint, making it easier to reuse existing Arduino shields without a breadboard full of jumper wires.Solder your Teensy board, sold separately, to the marked footprint on the adapter, then plug...
Teensy 3.x Feather Adapter
·
The Teensy 3.x Feather Adapter rearranges the pins of a Teensy 3.x board to match the Adafruit Feather form factor and pinout. This allows the Teensy to work with the full range of FeatherWing add-ons — motor drivers, GPS modules, LED matrices, OLEDs, and more. The adapter also includes a built-...
2x3 Male PTH Header - 2mm Pitch
·
This is a compact 2x3 male through-hole header with 2mm pin spacing, suitable for soldering into compatible PCBs and add-on boards.The connector is unshrouded, uses square male pins, and is designed for simple push-pull mating. It is the same style of header included with the Ethernet Kit for Tee...
Teensy 3.1 XBee Adapter
The Teensy 3.1 XBee Adapter connects your Teensy development board with the popular XBee wireless module, giving you a compact solution for projects requiring a reliable, no-frills wireless serial link with decent range. The adapter also doubles as a breakout board for both the Teensy and XBee. ...
SparkFun Qwiic Shield for Teensy - Extended
An extended Qwiic shield that adds four Qwiic connectors to Teensy 4.1, Teensy 3.6, and Teensy 3.5 boards. Connects the I²C bus (GND, 3.3 V, SDA, SCL) to two horizontal and two vertical Qwiic ports for easy daisy-chaining of I²C sensors and actuators. Includes a PROG button that mirrors the Teen...
Teensy Stackable Header Kit (Extended)
These headers are made to work with the Teensy 4.1, Teensy 3.6, and Teensy 3.5 development boards. Each set of headers allows for your Teensy to be easily incorporated into a breadboard circuit or attach a shield on top of the board. This kit includes three headers (two 24-pin, and one 5-pin), en...
Raspberry Pi GPIO Shrouded Header - 2x20
A 2×20 shrouded (boxed) header designed to match the Raspberry Pi GPIO pinout. It provides a keyed, polarised connection point so you can run a ribbon cable from your Pi's GPIO to a breakout board, HAT prototype, or custom PCB without the risk of plugging in backwards. The through-hole header ha...
SparkFun Qwiic Shield for Teensy
The SparkFun Qwiic Shield for Teensy adds four Qwiic (I2C) connectors to your Teensy board, providing quick access to the SparkFun Qwiic ecosystem of sensors, actuators, and displays. Sized to fit the Teensy 4.0, Teensy 3.2, and Teensy LC footprints. The shield connects GND, 3.3V, SDA, and SCL f...
2x3-pin 2mm PTH Header Pins and Socket for Teensy 4.1 Ethernet
·
This header pin and socket set is intended for connecting the Ethernet pins on a Teensy 4.1 to a custom circuit board.The socket is designed to be soldered to the bottom side of the Teensy 4.1, making it useful when you need a neat board-to-board connection for a custom PCB design.Specifications:...
GPIO Terminal Block Breakout Board Module for Raspberry Pi
This terminal block breakout module comes fully assembled and soldered, ready for use with Raspberry Pi boards.It is compatible with Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, and Pi Zero W.The module features 2.54 mm (0.1″) pitch terminal blocks su...
Color Coded Header for Raspberry Pi
·
A colour-coded 2×20 pin header for the Raspberry Pi Zero and Zero W that makes it easy to identify pin functions at a glance. Each pin group is colour-coded so you can quickly find power, ground, and GPIO pins without counting or consulting a pinout diagram. Colour Coding Red – 5 V Yellow – 3...
0.100" (2.54 mm) Female Header: 2x3-Pin, Straight
A 2×3-pin (6-pin) female header with standard 0.1" (2.54mm) spacing. This compact dual-row header is commonly used for ISP programming connections, small sensor breakouts, and custom cable assemblies. The 2×3 configuration matches the standard AVR ISP programming header pinout, making it essenti...
Breadboard-friendly Mini PIR Motion Sensor with 3 Pin Header
·
A compact passive infrared (PIR) motion sensor that detects movement from people and animals at distances of 2 to 5 metres. Much smaller than standard PIR modules, this sensor is ideal for unobtrusive projects and plugs directly into a breadboard or perfboard. Powered from 3–12 V DC via an onboa...
Stacking Header Kit for ItsyBitsy or Teensy
·
These three Stacking Headers alone are, well, lonely. But pair them with our ItsyBitsy boards, and you're in business! Great for putting something a-top your ItsyBitsy, like this AirLift bitsy add-on. Also works great for 'short' Teensy boards - not Teensy 3.5 or 3.6 long s...
Adafruit 6-pin AVR ISP Breadboard Adapter Mini Kit
·
Stop searching for the AVR ISP pinout every time you program. This simple breakout adapter converts the standard 2×3 AVR ISP box header to two breadboard-friendly 1×3 rows, making it easy to wire up your programmer without crossed wires or guesswork. The adapter plugs neatly into any standard br...
USB Host Cable for Teensy 4.1 and 3.6
·
This adapter cable lets a Teensy 4.1 or Teensy 3.6 use its USB host capability by converting the dedicated 5-pin USB host header connection into a standard female USB Type-A port.Once fitted, your Teensy can act as a USB host for peripherals such as keyboards, mice, MIDI controllers and USB hubs,...
BH1745 Luminance and Colour Sensor Breakout
A really sophisticated and accurate colour and luminance sensor breakout that's Raspberry Pi and Arduino compatible. As well as detecting RGB colour and light level, it has added bells and whistles like 50/60Hz light noise rejection, a wide detection range, and two illumination LEDs. T...
