All Products
Showing 1-20 of 51 products · 21 unavailable products hidden
Premium Male/Male Raw Jumper Wires - 40 x 6 (150mm)
Premium Male/Female Raw Jumper Wires - 40 x 6
2.13inch E-Paper (G) raw display, 250x122, Red/Yellow/Black/White
960×680, 13.3inch E-Ink raw display, SPI interface, without PCB
HIPS Filament 1.75mm, 1Kg Roll - Raw (no pigment)
GNSS-RTK Positioning Kit with LoRa 868MHz (EU)
MPN: KIT0198-EU
GNSS-RTK Positioning Kit with LoRa (915MHz)
MPN: KIT0198-US
IMX179 8MP Autofocus USB Camera Module with Microphone
MPN: FIT1022
MicroMod GNSS RTK Carrier Board - ZED-F9P
MPN: GPS-17722
GPS-RTK Board - NEO-M8P-2 (Qwiic)
MPN: GPS-15005
TSSP77038 38kHz IR Demodulator Breakout
MPN: ADA5940
Red 7-segment clock display - 1.2 digit height
Adafruit ENS160 MOX Gas Sensor - Sciosense CCS811 Upgrade
Red 7-segment clock display - 0.56 digit height
SparkFun OBD-II UART
ProtoShield for Arduino Pro Mini
Green 7-segment clock display - 0.56 digit height
Blue 7-segment clock display - 0.56 digit height
Yellow 7-segment clock display - 0.56 digit height
Adafruit TSL2591 High Dynamic Range Digital Light Sensor
Premium Male/Male Raw Jumper Wires - 40 x 6 (150mm)
Our Raw Male/Male Jumper Wires are perfect for making a custom jumper wire sets for wire harnesses or jumpering between headers on PCB's. These premium jumpers are a little over 6" (150mm) long and come in a 'strip' of 40 (4 pieces of each of the ten colors). The 0.1" raw sockets on either end...
Premium Male/Female Raw Jumper Wires - 40 x 6
Our Raw Male/Female Jumper Wires are perfect for making a custom jumper wire sets for wire harnesses or jumpering between headers on PCBs. These premium jumpers are a little over 6", almost 8" (about 200mm) long and come in a 'strip' of 40 (5 pieces of the ten rainbow colors). The 0.75...
2.13inch E-Paper (G) raw display, 250x122, Red/Yellow/Black/White
A 2.13″ four-colour e-paper raw display from Waveshare, capable of rendering red, yellow, black, and white — making it ideal for eye-catching price tags, shelf labels, and status indicators. Like all e-ink panels, it retains the displayed image indefinitely with no power applied and consumes ener...
960×680, 13.3inch E-Ink raw display, SPI interface, without PCB
A 13.3-inch e-Paper raw display panel with 960×680 resolution in black and white. This is the bare display panel without a driver board — ideal for custom integrations where you have your own driver hardware or want to design a bespoke mounting solution. The e-ink technology requires no backligh...
HIPS Filament 1.75mm, 1Kg Roll - Raw (no pigment)
We've finally found the best HIPS filament in Australia! This is a 1Kg reel of dissolve-able 1.75mm colourless (no pigment) HIPS (High Impact Polystyrene) filament.Makers frequently use HIPS as support material because it is easily removed with Limonene solution (the main component in the oi...
GNSS-RTK Positioning Kit with LoRa 868MHz (EU)
· MPN: KIT0198-EU
This GNSS-RTK kit is a complete base-and-rover positioning setup for projects that need centimetre-level location data. It uses Real-Time Kinematic correction, with a stationary base station sending RTCM correction data over an integrated LoRa 868MHz link to the mobile RTK unit.The system is buil...
GNSS-RTK Positioning Kit with LoRa (915MHz)
· MPN: KIT0198-US
This dual-module GNSS-RTK kit brings a base station and mobile rover together for high-precision positioning projects. It uses Real-Time Kinematics, where the stationary base station sends correction data to the moving rover to reduce common GNSS errors and deliver centimetre-level positioning.Th...
IMX179 8MP Autofocus USB Camera Module with Microphone
· MPN: FIT1022
This compact USB camera module is built around the Sony IMX179 image sensor, giving embedded projects an 8MP imaging option with autofocus and a USB connection. It is designed for use with platforms such as Raspberry Pi, NVIDIA Jetson, LattePanda, RDK X5 and PCs.The module uses the USB Video Clas...
MicroMod GNSS RTK Carrier Board - ZED-F9P
· MPN: GPS-17722
Built around the u-blox ZED-F9P, this MicroMod carrier gives your project high-precision GNSS and RTK positioning in a swappable, solderless MicroMod format. It supports rover and base station operation, with RTK accuracy down to millimetre-level positioning when used with suitable correction dat...
GPS-RTK Board - NEO-M8P-2 (Qwiic)
· MPN: GPS-15005
Built around the u-blox NEO-M8P-2, this breakout brings high-accuracy GNSS and GPS positioning with RTK support to the Qwiic ecosystem. It’s designed for applications where standard GPS accuracy isn’t enough, with RTK positioning down to 25mm so you can track the location of a device, robot or ve...
TSSP77038 38kHz IR Demodulator Breakout
· MPN: ADA5940
This breakout uses Vishay's TSSP77038 infrared demodulator to give you the raw demodulated output from a 38kHz IR signal, without the extra filtering used in typical remote-control receivers. That makes it a handy choice for reflective sensing, light barriers, fast proximity detection, and modula...
Red 7-segment clock display - 1.2 digit height
I like big seven-segment displays and I cannot lie! Design a clock, timer or counter into your next project using our pretty, candy-bar sized 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments there is a top right dot (per...
Adafruit ENS160 MOX Gas Sensor - Sciosense CCS811 Upgrade
The Adafruit ENS160 is a fully integrated metal-oxide (MOX) gas sensor from ScioSense, designed as a drop-in upgrade for the now-discontinued CCS811. It combines multiple MOX sensing and heating elements on a single chip to provide detailed air quality readings including TVOC (Total Volatile Orga...
Red 7-segment clock display - 0.56 digit height
A red 4-digit 7-segment clock display with 0.56″ (14.2 mm) digit height. Each digit includes a decimal point, plus a centre colon for time-based displays. Bright at 18 mcd, these displays are easy to read and can be dimmed by reducing drive current to save power. This is a raw multiplexed common...
SparkFun OBD-II UART
This board allows you to interface with your car’s OBD-II bus. It provides you a serial interface using the ELM327 command set and supports all major OBD-II standards such as CAN and JBUS. The board also provides a footprint which mates directly to our FTDI Basic or a Bluetooth Mate. The DB9 conn...
ProtoShield for Arduino Pro Mini
A compact prototyping shield designed specifically for the Arduino Pro Mini. When your project needs just a bit more space for external circuitry, this shield adds 38 unconnected plated through-holes (PTHs) in a form factor that matches the Pro Mini. The shield connects to the top four pins on e...
Green 7-segment clock display - 0.56 digit height
Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal points on each digit and an extra wire for colon-dots in the center (good for t...
Blue 7-segment clock display - 0.56 digit height
Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal points on each digit and an extra wire for colon-dots in the center (good for t...
Yellow 7-segment clock display - 0.56 digit height
Design a clock, timer or counter into your next project using our pretty 4-digit seven-segment display. These bright crisp displays are good for adding numeric output. Besides the four 7-segments, there are decimal points on each digit and an extra wire for colon-dots in the center (good for t...
Adafruit TSL2591 High Dynamic Range Digital Light Sensor
The Adafruit TSL2591 is an ultra-high-range digital light sensor with a massive 600,000,000:1 dynamic range. It features both infrared and full-spectrum photodiodes, allowing you to separately measure infrared, full-spectrum, or human-visible light for accurate lux calculations across an enormous...
