Waveshare
2.13inch E-Paper (G) raw display, 250x122, Red/Yellow/Black/White
A 2.13″ four-colour e-paper raw display from Waveshare, capable of rendering red, yellow, black, and white — making it ideal for eye-catching price tags, she...
Get notified when back in stock
A 2.13″ four-colour e-paper raw display from Waveshare, capable of rendering red, yellow, black, and white — making it ideal for eye-catching price tags, shelf labels, and status indicators. Like all e-ink panels, it retains the displayed image indefinitely with no power applied and consumes energy only during a refresh cycle.
This is a raw display panel without a driver board. You will need a compatible e-paper driver HAT or breakout to connect it to a Raspberry Pi, Arduino, STM32, or Jetson Nano. Waveshare provides example code and documentation for all four platforms.
Key Features
- Four-Colour Display – Red, yellow, black, and white ink for vivid, attention-grabbing content
- 250 × 122 Resolution – Crisp detail on a compact 2.13″ panel
- Ultra-Low Power – Image persists with zero power draw; only refreshes consume energy
- Wide Viewing Angle – Greater than 170° for easy readability from any direction
- SPI Interface – Standard serial connection to your driver board
- Paper-Like Appearance – Passively reflective display requires ambient light, no backlight needed
Ideal For
- Electronic price tags and shelf labels
- Asset and equipment identification tags
- Conference name badges
- Low-power IoT status displays
Package Contents
- 1× 2.13″ e-Paper (G) Raw Display
Resources
Find this product in
Displays & Screens
You might also like
Customers who bought this also bought
Raspberry Pi Zero 2 WH - with soldered headers
$34.85
ESP-12S Wifi Module (ESP8266)
$7.00
Component Kit for Arduino E3
$3.95
Prototyping Shield for Raspberry Pi 2 /Model A+/Model B+
$3.30
EC11 Rotary Encoder Module
$5.00
RP2040 Microcontroller Camera Development Board, Onboard HM01B0 Grayscale Camera And 1.14inch IPS LCD Display
$27.80
RP2040 Microcontroller Development Board, with 1.28inch Round Touch LCD, Compact size, Accelerometer And Gyroscope Sensor
$34.55
Adafruit RP2040 Feather ThinkInk for 24-pin E-Paper Display
$35.15
Jargon buster
Plain-language definitions for the technical terms in the product description.
- breakout
- A breakout board carries a small or fine-pitched component and brings its connections out to standard, breadboard- and header-friendly pins. Describing a part as a breakout means it can be wired into a project without soldering directly to the component's tiny contacts.
- IoT
- Short for Internet of Things, meaning physical devices that connect to networks or the internet to send data or be controlled remotely. It matters if you want projects such as connected sensors, remote controls or classroom data-logging activities.
- SPI
- A fast serial communication bus often used for displays, memory cards, and sensors. It matters because SPI devices need specific pins for clock and data, plus a separate chip-select line for each device.
- STM32
- STM32 is a family of microcontroller chips commonly used in embedded electronics. Knowing a product uses an STM32 can help when looking at firmware updates, pin connections, or low-level serial control options.