All Products

SKU: WS-30537 · MPN: 30537

This 7.5" e-paper display is powered entirely via NFC — no batteries, no cables. Using passive near-field communication technology, it receives both power and image data wirelessly from an NFC-enabled smartphone or dedicated NFC reader board, making it a truly maintenance-free display solution. ...

SKU: DF-DFR0884

This dual-USB step-down buck converter accepts 8–32V DC input and delivers a regulated 5V output at up to 3A across two USB Type-A ports simultaneously. With over 85% conversion efficiency and built-in reverse-connection and overload protection, it provides a compact and reliable way to power USB...

SKU: AF-136

NOTE: THIS SOLDERING IRON IS HAS A US PLUG AND IS NOT COMPATIBLE WITH AUSTRALIAN POWER OUTLETS. Starting out on your electronics adventure?Want to wield the mighty soldering iron?Tired of saying "I'd totally get into electronics if I only knew what tools to get..."? Working with substandard eq...

SKU: DF-FIT0381

A 10W high-power RGB LED module consisting of nine separate LED dies (red, green, and blue) on a single aluminium substrate. With a combined luminous output of up to 500 lumens, it delivers enough brightness for searchlights, stage lighting effects, and colour-mixing displays. Each colour channe...

SKU: DF-FIT0869

A 3S (3-series) battery protection module designed for connecting three 18650 or polymer lithium-ion cells in series to create a 12 V rechargeable battery pack. The board provides overcharge, over-discharge, overcurrent, and short-circuit protection to safeguard your battery pack during charging ...

SKU: SF-ROB-10335

This pan/tilt bracket kit includes two brackets and all the hardware needed to build a pan/tilt mechanism using two servo motors. Perfect for mounting cameras, sensors, or other small payloads that need two-axis positioning. Key Features Two-Axis Movement – Pan and tilt control with two servo ...

SKU: SF-COM-29062 · MPN: COM-29062

The RP2350A is a next-generation Raspberry Pi microcontroller IC designed for high-performance embedded projects, custom PCBs and compact connected devices. It builds on the RP2040 with a selectable dual-core, dual-architecture design, letting you run either Arm® Cortex-M33 cores or open-source H...

SKU: SF-LCD-24177 · MPN: LCD-24177

This compact white OLED gives microcontroller projects a crisp, high-contrast canvas in a very small footprint. With 128x32 pixels across a 0.91-inch diagonal, it is suited to status readouts, menus, sensor values and other small on-device displays.The module supports both 4-wire SPI and I2C inte...

SKU: DF-KIT0210 · MPN: KIT0210

This compact outdoor solar power kit is made for off-grid monitoring and IoT installations where mains power is not available. It pairs a 10W monocrystalline solar panel with a solar power controller to charge lithium batteries and provide regulated 12V and 5V outputs for devices such as Raspberr...

SKU: AF-419

Punch in your secret key into this numeric matrix keypad. This keypad has 12 buttons, arranged in a telephone-line 3x4 grid. It's made of a thin, flexible membrane material with an adhesive backing (just remove the paper) so you can attach it to nearly anything. The keys are connected into a m...

SKU: AF-5827 · MPN: ADA5827

This square TFT module is for advanced display projects that need a dense, eye-catching 480x480 screen. The 4-inch IPS panel provides 16-bit full-colour pixels, with colour that remains clear up to 80 degrees off-axis in any direction.This version does not include a touchscreen. It uses an ST7701...

SKU: SF-DEV-21326 · MPN: DEV-21326

This compact MicroMod processor board adds an STM32F405 to a compatible MicroMod Carrier Board, giving your project an ARM® Cortex®-M4 32-bit RISC core in a small, swappable M.2 module.The bevelled edge connector keys into the MicroMod M.2 socket and is secured with the screw supplied with MicroM...

SKU: MK-PV300

DetailsPanaVise Standard Base is our most popular base!Accepts all 300 series Heads and the PV Jr. 203 Head or any 5/8" (15.9mm) diameter shaft. Create a versatile work holding system by selecting two or three different heads!PanaVise Standard Base Features Single control knob and exclusive "spli...

SKU: AF-6207 · MPN: ADA6207

A warm-white LED filament shaped as the letter "P", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated in silicone, producing a bright, uniform glow from both sides. Lightweight and ...

SKU: DF-DFR0123

This 20W adjustable DC-DC boost converter with a digital display is based on the professional boost chip and supports 3~32V power input, 5~35V output, and an accuracy of ±0.05V. The switching frequency is 400KHz, the conversion efficiency can reach 94%, it has the functions of overheating prote...

SKU: AF-291

 The classic 'third hand tool,' as seen on every desk! We have one next to our Panavise jr, they complement each other well. This tool is good for holding small PCBs and wires for tinning or soldering to parts.  Every part can rotate around in any way with thunbscrews and wingnuts....

SKU: SF-KIT-30216 · MPN: KIT-30216

Add camera input and a capacitive touchscreen to an RP2350 RedBoard IoT for machine-vision projects. This kit combines the Red Vision Touch Display for RedBoard with the Red Vision Camera Board - HM01B0 (Color), and is designed for quick setup with no soldering required.The display board plugs di...

SKU: AF-5920 · MPN: ADA5920

A 1-metre flexible LED strip with 480 green SMT LEDs per metre, soldered side-by-side in a "chip on board" configuration. Topped with a translucent silicone diffuser and encased in a sealed silicone tube, the result is a continuous, smooth light output that resembles neon tubing — without the nee...

SKU: AF-5857 · MPN: ADA5857

These durable (but affordable!) gearbox motors (also known as 'TT' motors) are an easy, low-cost way to get your projects moving. This is a TT DC Bi-Metal Gearbox Motor with a gear ratio of 1:90, about double the 'standard' 1:48 ratio. That gives them higher torque but slower rotational speed. Si...

SKU: SF-TOL-14854 · MPN: TOL-14854

This two pack of Carbide 3D flat mills is made for milling flat or prismatic surfaces, making it useful for specialised 3D machining and fabrication work.Each cutter has a 0.25 inch cutting diameter, a 0.25 inch shank diameter and a 0.75 inch cutting length. The cutters are made from solid carbid...