Adafruit
Flexible 12V LED Strip - 480 LEDs per meter - 1m long - Green
· MPN: ADA5920
A 1-metre flexible LED strip with 480 green SMT LEDs per metre, soldered side-by-side in a "chip on board" configuration. Topped with a translucent silicone ...
Get notified when back in stock
A 1-metre flexible LED strip with 480 green SMT LEDs per metre, soldered side-by-side in a "chip on board" configuration. Topped with a translucent silicone diffuser and encased in a sealed silicone tube, the result is a continuous, smooth light output that resembles neon tubing — without the need for transformers, glass, or inert gases.
Simply connect 9–12 V DC to the red and black wires and the strip glows. The whole 1 m strip draws approximately 800 mA at 12 V. The strip can be cut to shorter lengths as needed, and adhesive backing makes mounting easy.
Key Features
- 480 LEDs/m – Dense chip-on-board layout for smooth, continuous light
- Silicone Diffuser – Translucent silicone for a neon-like glow
- Sealed Silicone Tube – Weather-resistant for outdoor projects
- Extremely Flexible – Bends easily for costumes, bikes, and decorations
- Adhesive Backing – Stick-on mounting
- Cuttable – Trim to desired length
Specifications
- Colour – Green (non-addressable)
- LED Density – 480 LEDs per metre
- Length – 1 m
- Input Voltage – 9 V (bright) to 12 V (very bright)
- Current Draw – ~800 mA max at 12 V
- Wiring – 2 wires (red = +, black = GND)
Resources
Jargon buster
Plain-language definitions for the technical terms used above.
- DC
- DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.
- GND
- GND is the ground or reference connection (0 V) for a circuit. When connecting two devices together, their grounds must be joined so both agree on what counts as a low or high signal.
- LED
- A light-emitting diode (LED) is a small electronic component that emits light when current flows through it in the correct direction. Because it only conducts one way, its polarity matters, and a through-hole LED must be soldered the correct way around to light up.
- microcontroller
- A microcontroller is a small computer on a single chip that runs a stored program and controls connected inputs and outputs such as buttons, sensors, displays and communication interfaces. In a device built around one, it is the part that executes the code and coordinates the device's behaviour.
- NeoPixel
- A type of addressable LED system where colour data is sent along a single digital data line from one LED or controller to the next. Compatibility matters because the timing and signal format must match for the lights or driver board to respond correctly.
- PWM
- Pulse Width Modulation is a way for a digital pin to simulate variable output power by switching on and off very quickly. It matters for controlling things like LED brightness, motor speed, or servo-style signals from a microcontroller pin.
Find this product in
rgb led strips
Document · 1.1 MB · Click any page to view full size
Resources & Downloads
Guides, code examples, and more
Related Tutorials
Free guides on learn.littlebird.com.au
