All Products

SKU: SF-TOL-10405

This sewing needle set is designed for e-textile projects, with eye sizes large enough to easily thread conductive thread. The set includes both large and small needles to suit different stitching needs — from thick fabric and felt to finer materials. Key Features E-Textile Ready – Eyes sized ...

SKU: AF-1850

Add a touch of sparkle to your wearables with the Adafruit Gemma Sequin Starter Pack. This beginner-friendly kit includes a GEMMA V2 sewable microcontroller, warm white LED sequins, conductive thread, needles, and a coin cell battery holder — everything you need to start sewing glowing electronic...

SKU: AF-653

This sewable CR2032 battery holder makes it easy to add power to wearable electronics projects. Two small 1mm holes in the metal connection tabs are perfectly sized for a #5 or smaller needle to pass through, so you can stitch it directly onto fabric with conductive thread. One tab connects to g...

SKU: DF-FIT0872

A gold-plated IPEX (U.FL) to SMA male (inner needle) pigtail cable for connecting wireless modules to external antennas. The gold-plated connectors have passed 48-hour salt spray testing for long-lasting corrosion resistance. Built with RG1.13 wire and a high-density shielding layer, this cable ...

SKU: PI-ANT-BITS

A set of three replacement soldering tips for the Antex XS25 soldering iron. Each tip offers a different profile to suit various soldering tasks, from fine-pitch SMD work to general through-hole soldering. Package Contents No. 51 – 2.3mm needle tip No. 53 – 2.3mm tip No. 55 – 0.5mm pointed t...

SKU: WS-19297 · MPN: 19297

This 5G omni-directional antenna provides 18dBi gain across a wide 600–6000MHz frequency range, covering 5G, 4G, 3G, and GNSS bands. The omni-directional radiation pattern delivers consistent signal quality in all directions without needing to orient the antenna toward a specific tower. It conne...

SKU: AF-1405

Get started with the fabulous Adafruit Flora platform with this lovely budget kit, just enough to get you started with this fun wearable computer. Included are enough parts to make your first wearable electronic project. There's a Flora motherboard, four ultra-bright chainable RGB pixels, a 3x...

SKU: SF-PRT-08100

Individual crimp pins for use with polarized connector housings. These pins prevent incorrect or reversed connections, making them ideal for power, sensor, and general-purpose wiring on perfboard and PCB projects. Attach using needle-nose pliers and a soldering iron — no special crimping tools r...

SKU: AF-2769

The Circuit Playground Express Educator's Pack is a comprehensive classroom kit built around Adafruit's versatile Circuit Playground Express board. It includes everything educators need to teach electronics, coding, and wearable technology — from conductive thread and servos to battery packs and ...

SKU: SF-TOL-12078

These needle tipped multimeter probes are great for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Not only can these make a good replacement for any multimeter probes you have now that are damaged or worn, but thanks to the needle tip, these probes are great f...

SKU: AF-5473

Why settle for a boring old hex key set when you can get one with a burst of color like this 9 Piece Rainbow Metric Allen Wrench / Hex Key Set. If your DIY project has hexagonal screws, you’re gonna need hex keys (also known as Allen wrenches or Allen keys) - and we always like it when our tools ...

SKU: AF-641

A 3-ply conductive thread made entirely from 316L stainless steel fibre. Thin enough to sew by hand with a medium-eye needle, yet strong and smooth — ideal for wearable electronics, e-textile projects, and sewable circuits. With a resistivity of approximately 10 ohms per foot, this thread can dr...

SKU: LB-SD-3502

A six-piece precision Torx screwdriver set from Pro'sKit, featuring AISI 8660 Cr-Mo-V alloy steel blades for durability and hardness. Each screwdriver has a rotating end cap for fine control and a non-slip ABS handle for comfortable use during detailed repair work. Key Features Cr-Mo-V Alloy S...

SKU: LB-LR0214-16

This compact 12V temperature controller features a 3-digit LED display for setting and monitoring temperature, along with a built-in 10A relay for switching heating or cooling loads. It uses an NTC thermistor probe (included) for measurement across a wide range of −50 to 110°C. The relay operate...

SKU: AF-1494

Kiss those days of heat-shrink, melted jacketing and clumsily-arranged third-hand tools goodbye! Go 'cold splice' with these snap-able plastic splices for fast connections. Use with any 22-26 AWG solid core wire and slip them into the plastic splice so that they slide into the metal teeth. Then s...

SKU: SF-TOL-27923 · MPN: TOL-27923

This handy tool helps remove a standard 2-pin JST-PH connector with 2mm pitch, such as the female connector commonly found on single-cell LiPo batteries. It gives you something safer and easier to grip than the connector body itself, helping avoid sore fingertips, pinched wires from needle nose p...

SKU: AF-1285

The Adafruit Beginner LED Sewing Kit has everything you need to start stitching glowing circuits with conductive thread. No soldering or microcontroller required — the included candle-flicker LEDs twinkle automatically for a warm, animated glow. With enough supplies for two projects with two LED...

SKU: AF-5646

Add a dazzling 5×5 grid of 25 addressable RGB NeoPixels to any QT Py or Xiao board with this compact BFF (Best Friend Forever) add-on. The tiny SK6805 LEDs (1.5 × 1.5 mm each) pack vivid colour into a minimal footprint, powered directly from the QT Py's USB Type-C connection. The PCB is designed...

SKU: AF-1333

This membrane keypad has a single key, but it does have an embedded surface-mount red LED installed. The flex cable is also extra-long, so we can think of a lot of wearable and portable projects that would use this sort of switch and have an LED as feedback (say, to indicate that an action is occ...

SKU: AF-1728

A charming sew-your-own owl craft kit by Cynthia Treen Studio. Designed for beginner adults and competent young stitchers, the kit includes all materials and step-by-step instructions to create a small stuffed owl approximately 3.5" (9 cm) tall. Cynthia Treen Studio uses locally sourced and recy...