All Products

SKU: AF-3893

The JST PH 3-Pin to Male Header Cable converts a JST PH 3-pin connector into three individual colour-coded wires, each terminated with a 0.1" (2.54 mm) male header pin. It's ideal for extending sensor or LED connections to a breadboard or development board. At 200 mm long, this cable provides en...

SKU: SF-CAB-28768 · MPN: CAB-28768

With the SparkFun Qwiic Connect System expanding every day, we want to make sure it becomes as accessible as possible but we understand there are other systems that can compliment it out there. The Qwiic to Gravity Adapter Cable allows interoperability between the SparkFun Qwiic Connect Syste...

SKU: AF-5087

A matching pair of 3-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amps of current. The friction-lock connectors make it easy to connect and disconne...

SKU: AF-4431

Little clicky switches are standard input "buttons" on electronic projects. These are just like our Colorful Round Tactile Button Switch Assortment, but already assembled onto a PCB - they even have a pull-up resistor installed! The pins are normally open (disconnected) and when the button is pre...

SKU: AF-4046

This cable will let you turn a JST PH 3-pin cable socket into 3 individual tinned wires. These are great to match up with our JST 3-PH cables, for extending and connecting sensors or LEDs, and the wires are even color coded! We also carry the socket 'mating' version of this cable over here....

SKU: AF-4721

This matching pair of 1.25 mm pitch 3-pin cables includes an inline socket and plug connector, providing a complete Molex PicoBlade-compatible connection set. At 40 cm long, these cables offer plenty of reach for internal wiring and panel-mount applications. The friction-lock connectors provide ...

SKU: SF-PRT-09750

A 3-pin right-angle JST PH series through-hole connector with 2mm pin spacing. These compact connectors provide a solid locking connection and are rated for moderate current, making them a reliable choice for PCB-mounted sensor and peripheral connections. Commonly used to interface with Sharp in...

SKU: AF-4424

A 200mm adapter cable with a JST-SH 4-pin connector (STEMMA QT / Qwiic, 1mm pitch) on one end and a JST-PH 4-pin connector (STEMMA / Grove, 2mm pitch) on the other. Use it to bridge I2C sensors and drivers between the two connector ecosystems. Both connectors have a latching feel for secure conn...

SKU: AF-4862

The Adafruit CYBERDECK Bonnet is a GPIO extender for the Raspberry Pi 400 that lets you plug any Pi bonnet, mini-HAT, or pHAT into the back of the Pi 400 at an angled position. It duplicates every GPIO pin from input to output, so your add-on boards work without any pin limitations. In addition ...

SKU: RP-SC0889 · MPN: SC0889

The Raspberry Pi Debug Probe is a USB-to-debug adapter designed for solderless, plug-and-play debugging and programming of Raspberry Pi Pico and RP2040-based boards. It provides both a serial wire debug (SWD) interface and a UART interface, each using the Raspberry Pi 3-pin debug connector. Base...

SKU: AF-4030

This cable will let you turn a JST PH 3-pin cable port into 3 individual wires with grippy mini alligator clips. We're carrying these to match up with any of our boards or breakouts with 3-pin 'STEMMA' connectors on them such as the HalloWing or NeoTrellis M4. This cable has a JST PH 3-pin ...

SKU: AF-6051 · MPN: ADA6051

Add magnetic sensing to your project with this breakout built around the Texas Instruments DRV5032 digital Hall effect sensor. Its digital output changes when the magnetic flux density threshold is crossed, making it useful for detecting magnets, position, lids, doors, rotations and other simple ...

SKU: SF-PRT-14998

A short adapter cable with a JST-PH male connector on one end and a JST-SM male connector on the other. Use it to bridge between devices with different JST connector types, including EL wire and panel products. Key Features Connectors – JST-PH male to JST-SM male Length – 100mm Voltage Ratin...

SKU: AF-3955

This 200 mm cable converts a JST PH 4-pin connector into four individual wires with 0.1″ (2.54 mm) male header pins on the end. It's designed for connecting STEMMA and Grove I²C boards to breadboards, socket headers, or any standard 0.1″ pitch connection. Key Features JST PH to Male Headers – ...

SKU: AF-2566

This product's about as simple as a cup of lemonade on a hot summer day.  And, like lemonade, it's just three components! This board is a sewable adapter with a 3-pin JST wiring adapter.  It's a perfect way to add a simple link between things like our Flora NeoPixels and more co...

SKU: AF-4336

A 100 mm (4″) cable fitted with JST-PH 3-pin connectors on both ends. The latching connectors provide a secure, compact connection that won't come apart easily. Colour-coded wiring makes hookup straightforward: red for power, black for ground, and white for signal. Designed to work with STEMMA b...

SKU: AF-4686

The Adafruit TMP235 is a plug-and-play analog temperature sensor with a 3-pin JST PH (STEMMA) connector. Unlike I2C sensors, this one outputs a simple analog voltage proportional to temperature — just connect it to any microcontroller with an analog input and read the value. No libraries or compl...

SKU: AF-5090

A matching pair of 6-pin JST PH compatible cables with inline plug and socket connectors. Each cable is 20 cm long with stranded 26 AWG wires, providing a reliable and compact connection that can carry a couple of amps of current. The friction-lock connectors make it easy to connect and disconne...

SKU: SF-CAB-13685

This is a simple jumper adapter cable that comes pre-terminated with a female JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a JST connector to a breadboard or an Arduino-based device’s pins.Wire length is 140mm (about 5....

SKU: AF-4422 · MPN: ADA4422

This 220 piece connector assortment gives your workstation a handy supply of 2.0mm pitch JST-PH compatible plugs, sockets and crimp terminals. It is a useful kit for prototyping, repairs and making up custom leads for common maker electronics.JST-PH style connectors are widely used in electronics...