All Products

SKU: DF-SEN0390

A high-precision ambient light sensor housed in a transparent semisphere case for optimal light-gathering performance. With a wide 0–200 klx detection range and I2C communication, this sensor is ideal for applications requiring accurate ambient light measurement across a broad range of conditions...

SKU: SF-COM-08348

The TEMT6000x01 is a compact ambient light sensor that operates as an NPN phototransistor. The more light that hits the sensor, the stronger the base bias, producing an analog output proportional to the ambient light level. Its spectral response is closely matched to the human eye, making it idea...

SKU: SF-SEN-17053

The MQ-137 is an ammonia (NH3) gas sensor from Winsen, designed to detect ammonia concentrations in the air. The sensing element is tin dioxide (SnO2), which has lower conductivity in clean air and increases in conductivity as ammonia gas concentration rises. A simple voltage divider circuit can...

SKU: PI-PPMB00130

The Amp:bit is the easiest way to connect a speaker or headphones to your BBC micro:bit. It plugs directly onto the edge connector and provides a 3.5mm headphone jack, solder pads for a speaker, and a volume control wheel — everything you need to add audio to your micro:bit projects. If you have...

SKU: SF-COM-14194

The Clincher connector from Amphenol FCI provides a quick, tool-free way to terminate Flat Flexible Cables (FFCs) to standard 0.1" pin headers. Simply insert the end of the cable into the connector and press it closed — the internal teeth "clinch" around the conductors, breaking them out to two f...

SKU: SF-COM-14195

The Clincher connector from Amphenol FCI provides a quick, tool-free way to terminate Flat Flexible Cables (FFCs) to standard 0.1" pin headers. Simply insert the end of the cable into the connector and press it closed — the internal teeth "clinch" around the conductors, breaking them out to two m...

SKU: SF-COM-14196

The Clincher connector from Amphenol FCI provides a quick, tool-free way to terminate Flat Flexible Cables (FFCs) to standard 0.1" pin headers. Simply insert the end of the cable into the connector and press it closed — the internal teeth "clinch" around the conductors, breaking them out to three...

SKU: SF-COM-14197

The Clincher connector from Amphenol FCI provides a quick, tool-free way to terminate Flat Flexible Cables (FFCs) to standard 0.1" pin headers. Simply insert the end of the cable into the connector and press it closed — the internal teeth "clinch" around the conductors, breaking them out to three...

SKU: DF-FIT0800

A compact amphibious micro submersible pump perfect for building small fountains, automated plant watering systems, and DIY water projects. Powered by 3–6V DC, it features low noise operation, high efficiency, and easy cleaning. With an IP68 waterproof rating, the pump can be fully immersed in w...

SKU: AF-512

A PSP/Xbox-style analog thumb joystick with a built-in press-to-select button, mounted on a breakout board designed for easy panel mounting. Unlike simple directional joysticks, this analog stick provides precise, proportional X and Y readings for accurate positional control. The breakout board ...

SKU: AF-1449

A plastic-geared micro servo with an extra trick — a fourth wire brings out the internal potentiometer feedback signal, letting you read the servo's actual position via an analog input. This feedback capability enables motion recording, playback, and improved stability in robotics applications. ...

SKU: AF-1404 · MPN: ADA1404

This standard-size hobby servo adds a handy fourth white wire that brings out the internal potentiometer wiper. Connect it to an analogue input on a board such as an Arduino to read the servo’s position as a voltage while still driving the servo as normal.That feedback signal can be useful in rob...

SKU: LB-LR0030

A simple analog Hall effect sensor module for detecting magnetic fields with Arduino. When a magnet is detected, the on-board LED turns on and the analog output changes proportionally to the field strength — making it easy to detect both the presence and relative proximity of a magnet. Key Featu...

SKU: AF-3246

A neat little breakout board designed for mounting a PSP-style mini thumbstick to your project. The board features panel-mount friendly hole placement and dual-sided headers for mechanical stability when connected to a breadboard or perfboard. Since the thumbstick is analog, you'll need two anal...

SKU: AF-1778

The AD8495 from Analog Devices is an analog-output K-type thermocouple amplifier on a compact breakout board. Simply power the board with 3–18V DC, connect a K-type thermocouple to the terminal block, and read the temperature as a voltage on the OUT pin — no digital protocols or complex configura...

SKU: SF-TOL-10285

A classic analog panel meter for measuring DC voltage from 0 to 5V. Features a clear, easy-to-read scale with an adjustable dial for zero calibration. Ideal for monitoring sensor outputs, power supply voltages, and other 5V range signals in your projects. Key Features 0–5V DC Range – Perfect f...

SKU: AF-2439

An analog LED strip featuring both RGB and warm white (~3000K) LEDs at 60 LEDs per metre on a weatherproof white flexi PCB. Control the entire strip at once using any microcontroller and four transistors (one per channel) — no addressable LED library needed, just PWM for colour mixing. Power the...

SKU: DF-FIT0031

A pack of 10 analog sensor cables designed for use with DFRobot IO Expansion Shields and compatible analog sensors. Each cable connects a sensor to the expansion shield's analog ports, making wiring quick and tidy. Each cable features a servo-type connector (Signal, GND, PWR) on one end and a 3-...

SKU: SF-COM-08636

The MCP3002 is a 10-bit analog-to-digital converter (ADC) with a simple SPI interface, available in a breadboard-friendly 8-pin DIP package. Use it to add analog input capability to microcontrollers that lack an ADC, or to expand the number of available analog channels on your project. Key Featu...

SKU: AF-1918

An analog UV light sensor breakout based on the GUVA-S12SD photodiode, detecting the 240–370nm range covering UVB and most of the UVA spectrum. An on-board op-amp amplifies the tiny photodiode current to a readable voltage level, making it simple to connect to any microcontroller's analog input. ...