All Products

SKU: DF-FIT0641

This 1-metre USB-A to USB-C cable supports both data transfer and power delivery at up to 5V/3A (15W). It provides a reliable connection for charging and programming USB-C devices including the Raspberry Pi 4B, Jetson Nano, and other USB-C-enabled development boards and phones. Key Features Po...

SKU: AF-1466

This UL-listed switching power supply delivers a clean, regulated 5V DC output at up to 4A (4,000mA / 20W) via a standard 5.5×2.1mm centre-positive DC barrel jack. It accepts 110–240V AC input and is ideal for powering LED matrices, NeoPixel strips, and other high-current 5V projects. Key Featur...

SKU: AF-5367

This 5W ETFE solar panel from Voltaic Systems delivers a nominal 5V at up to 940mA peak, providing reliable power for portable electronics, battery charging, and off-grid projects. It uses 10 high-efficiency monocrystalline SunPower cells rated at over 22% efficiency. The panel is constructed wi...

SKU: EC-DIY19560P

This compact brushless submersible pump operates on 3.5–9V DC via a USB connector, making it easy to power from a USB power bank, solar panel, or development board. It delivers up to 200L/h flow and can push water up to 1.5m in height, with low noise and low power consumption. The pump uses a hi...

SKU: DF-FIT0878

This 5V COB LED strip produces bright, uniform blue light (465nm) with no visible hotspots or shadows. It uses 16 chip-on-board LEDs encapsulated in silicone for protection and longevity, and runs on just 5V DC — making it easy to power from USB, battery packs, or microcontrollers. The strip is ...

SKU: DF-FIT0879 · MPN: FIT0879

This compact green COB light bar provides bright, even illumination for decorative lighting and small embedded projects. It uses 16 densely packed COB LEDs under silicone encapsulation to create a smooth luminous surface without the dotted look common on traditional LED strips.It runs from a simp...

SKU: DF-FIT0876 · MPN: FIT0876

This compact COB LED strip uses 16 LEDs under a silicone encapsulated surface, helping protect the chips while providing a smooth, even warm white light output.It runs from DC 5V, making it suitable for battery-operated lighting projects and other low-voltage builds. The strip is solderable and c...

SKU: TB-MP3144

An ultra-slim switchmode power adaptor that delivers 5V DC at 1A through a compact, lightweight design. Slim enough to sit side by side on a power board without blocking adjacent outlets. Features built-in EMI filtering, short circuit protection, over-current protection, and thermal shutdown for...

SKU: AF-3874

This 5V electromagnet provides 10kg of holding force when energised with approximately 5V DC (4–6V working range). When the power is switched off, the magnet loses its magnetic field, making it perfect for controllable locking, sorting, and pick-and-place applications. Since it behaves as an ind...

SKU: AF-3872

This 5V electromagnet provides 2.5kg of holding force when energised with approximately 5V DC (4–6V working range). When the power is switched off, the magnet loses its magnetic field, making it ideal for small controllable locking, sorting, and pick-and-place applications. Since it behaves as a...

SKU: AF-3875

This 5V electromagnet provides 25kg of holding force when energised with approximately 5V DC (4–6V working range). When the power is switched off, the magnet loses its magnetic field, making it suitable for controllable locking, sorting, and pick-and-place applications. Since it behaves as an in...

SKU: AF-3873

This 5V electromagnet provides 5kg of holding force when energised with approximately 5V DC (4–6V working range). When the power is switched off, the magnet loses its magnetic field, making it suitable for small controllable locking, sorting, and pick-and-place applications. Since it behaves as ...

SKU: DF-FIT0839 · MPN: FIT0839

This ultra-slim green LED strip is made for decorative lighting in compact electronics projects, models and robotics where ordinary LED tape is too wide. At only 2.5mm wide and 1mm thick, it can fit into narrow channels, small frames and other tight installations.The strip has 60 SMD 0805 LEDs di...

SKU: DF-FIT0841 · MPN: FIT0841

This ultra-narrow flexible LED strip is made for compact lighting jobs where standard LED strips are too wide. At just 2.5mm wide and 1mm thick, it can be routed along edges, inside model structures, or within small electronics enclosures.The strip runs from a 5V supply and uses densely spaced SM...

SKU: DF-FIT0836 · MPN: FIT0836

Add warm-white accent lighting to tight builds with this ultra-thin, low-power flexible LED strip from DFRobot. At just 2.5mm wide and 1mm thick, it is well suited to ultra-narrow spaces where standard LED strips are too bulky.The strip runs from 5V and provides 60 LEDs per metre, making it a han...

SKU: DF-SEN0523

This IR break-beam photoelectric switch detects objects by sending an invisible infrared beam from an emitter to a receiver. When a non-transparent object passes between the two and breaks the beam, the receiver outputs a signal. It works over distances up to 4 metres with a fast 0.5ms response t...

SKU: DF-FIT0658

This compact 5V inductive proximity switch detects metal objects at distances up to 4mm without physical contact. It features an NPN normally-open output, a fast response time under 1ms, and a 1,000Hz switching frequency — making it reliable for high-speed detection applications. With an IP67 pr...

SKU: DF-FIT0880 · MPN: FIT0880

This compact COB LED strip provides bright red illumination from a 5V DC supply, making it handy for small lighting, display and battery-powered maker projects. It uses 16 LEDs under silicone encapsulation to help protect the chips and support a longer service life.The strip is designed for unifo...

SKU: DF-DFR0937

This wireless LED lamp pack uses magnetic resonance coupling technology to power 10 LEDs without any wires or batteries. A transmitting coil creates a non-radiative magnetic field that wirelessly transfers energy through air, paper, or plastic to small receiver coils built into each LED bead — li...

SKU: DF-FIT0750

This 50cm programmable RGB LED strip uses SK6812 (5050) COB LEDs to produce bright, uniform, full-colour light with no visible hotspots. With 166 individually addressable LEDs packed into just half a metre, it delivers smooth colour blending and high-density illumination. The strip runs on 5V DC...