All Products
Showing 61-80 of 97 products · 3 unavailable products hidden
Gravity: H2S Sensor (Calibrated) - I2C & UART
This is a sensor that detects hydrogen sulfide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of hydrogen sulfide in the environment. Can be widely used in the detection...
Gravity: Digital Sensor Cable for Arduino - 50cm (10 Pack)
This high-quality 50cm digital sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side. They are specially designed for our popular IO Expansion shield and digital sensors such as vibration sensors, tilt sensors, magnetic induction, et...
Gravity: Analog Sensor Cable for Arduino - 50cm (10 Pack)
This high-quality 50cm analog sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side. They are specially designed for our popular IO Expansion shield and analog sensors such as Ambient light sensor, Gray sensor, MIC sound, etc. It con...
Gravity SFA40 Formaldehyde (HCHO) Sensor
·
This Gravity-series module is a high-precision electrochemical sensor for monitoring formaldehyde (HCHO) in indoor air. It is built around Sensirion’s SFA40 sensing chip and is designed to selectively detect HCHO while reducing false readings from common household vapours such as alcohol or perfu...
Gravity: Haptic Motor Driver for LRA Motors
·
This Gravity haptic driver module is built for Linear Resonant Actuators (LRAs), turning simple I2C commands into crisp tactile feedback for interactive projects. It is powered by the TM6605 driver chip and supports LRA resonant frequencies from 140Hz to 220Hz.The module includes 44 built-in vibr...
Gravity: Digital 10A Relay Module For Arduino and Raspberry Pi
This Gravity digital relay module is designed for switching external loads from low-voltage controller boards. It suits 5V Arduino boards as well as 3.3V platforms such as Raspberry Pi, BBB, mbed, Intel Joule and Arduino 101.The module uses a high quality 3V relay and supports a wide input range,...
HUSKYLENS AI Vision Sensor Robot Kit with Devastator & Romeo V2
·
This kit combines the HUSKYLENS AI machine vision sensor with DFRobot's Devastator Tank Mobile Robot Platform and the Romeo V2 Arduino robot board. It is designed for building vision-enabled robots without needing to write complex image-processing algorithms from scratch.HUSKYLENS can recognise f...
HUSKYLENS Study Pack with micro:bit V2
·
This kit bundles a HUSKYLENS AI vision smart sensor, a micro:bit V2 board and the matching Study Pack for classroom-friendly image recognition projects. It is based around micro:bit programming and is designed to help students explore the eight HUSKYLENS functions through hands-on lessons.The stu...
Gravity: Formaldehyde (HCHO) Sensor (Arduino Raspberry Pi Compatible)
The Formaldehyde (HCHO) sensor is an Arduino & Raspberry Pi compatible module, which is the ideal solution for indoor air quality monitor. This is a HCHO(CH2O) sensor module. It can be used to measure HCHO in air. Through it, you can know the air quality. This sensor module is widely used ...
Gravity: Analog 20A Current Sensor
The Gravity Analog 20A Current Sensor measures both AC and DC current using the Hall effect, outputting a proportional analog voltage to your microcontroller. With high-voltage isolation built into the circuit design and a non-conductive acrylic base plate, it's designed for safe use in automatio...
Gravity: Analog Slide Position (Potentiometer) Sensor For Arduino
This arduino Slide Position Sensor is based on straight-slip slide potentiometer sensor. The sensor is able to give provide the position of the slider which is often considered as a linear potentiometer . The sensor includes two analog outputs to allow the user to average the values and m...
Gravity: Arduino Infrared Motion Sensor
This is a simple to use arduino motion sensor. Power it up and wait 1-2 seconds for the sensor to get a snapshot of the still room. If anything moves after that period, the 'alarm' pin will go low. This sensor checks for infrared heat in it's detecting angle. Human body, pets and several ot...
Gravity: Analog Infrared CO2 Sensor For Arduino (0~5000 ppm)
The concentration of carbon dioxide (0.03% usuallly) is related to daily life. Recently, there's a study showing that the atmospheric CO2 content has reached 0.0385% (385 ppm) which is the highest value since 2.1 million years. The raise of atmospheric CO2 content to some extent results in gl...
Gravity: Heart Rate Monitor Sensor For Arduino
The DFRobot heart rate sensor is a thumb-sized heart rate monitor designed for Arduino microcontrollers. This sensor is a pulse sensor which is developed based on PPG (PhotoPlethysmoGraphy) techniques. This is a simple and low-cost optical technique that can be used to detect blood volu...
Gravity: Analog Turbidity Sensor For Arduino
The Gravity Analog Turbidity Sensor measures water clarity by detecting the level of suspended particles. It works by measuring light transmittance and scattering rate, which change with the amount of total suspended solids (TSS) in the water. The sensor provides both analogue (0–4.5V) and digit...
Gravity: Arduino PIR (Motion) Sensor
A passive infrared (PIR) motion sensor from DFRobot's Gravity series. It detects infrared radiation from people and animals in motion and outputs a digital HIGH signal when movement is detected — ideal for security systems, occupancy sensing, and automated lighting projects. The sensor operates ...
Gravity: Arduino LM35 Temperature Sensor
This is an Arduino Temperature Sensor based on LM35 temperature chip. A Temperature Sensor can be used to detect ambient air temperature.The LM35 chip is produced by National Semiconductor Corporation and offers a functional range between 0 degree Celsius to 100 degree Celsius with a sensitivity ...
Gravity: Arduino Gas Sensor (MQ2)
INTRODUCTION This is a generic Arduino gas sensor. It has MQ2 probe which is able to detect LPG, i-butane, propane, methane ,alcohol, Hydrogen, smoke.It can be used in gas leakage detecting device in consumer and industry markets. It has a high sensitivity and fast response time. ...
Gravity: Arduino CO/Combustible Gas Sensor (MQ9)
The Gravity MQ-9 gas sensor detects carbon monoxide (CO) and combustible gases including methane and propane. It uses a semiconductor SnO2 sensing element that cycles between high and low temperatures — detecting CO at low temperature (1.5V) and combustible gases at high temperature (5.0V). With...
Gravity: Arduino Hydrogen Gas Sensor (MQ8)
This is an Arduino hydrogen gas sensor. It has high sensitivity to Hydrogen (H2) and less sensitivity to alcohol, LPG,cooking fumes . Hydrogen gas is highly flammable and will burn in air at a very wide range of concentrations The sensitivity is able to be adjusted by the potentiome...
