All Products
AI Overview
“Little bird board” is a broad match in the catalogue—these are the most relevant Little Bird branded boards by use-case:
Microcontroller / programmable boards
- Uno R3 - Little Bird ($19.55) — Arduino Uno R3 compatible development board (shield-compatible layout).
- Little Bird Finch Board ATTiny85 ($7.80) — ATtiny85 tiny programmable board aimed at e-textiles / wearables.
- Little Bird Finch Board ATTiny85 x 5 ($36.05) — 5-pack of the Finch boards for classes/workshops.
- EagLED - Little Bird E-Textile Snapable Board ($27.20) — Arduino-compatible wearable board with LEDs, light sensor, push button, and battery holder.
- EagLED - Little Bird E-Textile Snippable Board with Buzzer ($34.35) — similar wearable board but snippable and includes a buzzer.
LED “boards” (add addressable RGB lighting)
- Little Bird Lorikeet WS2812B Rainbow Board ($2.00) — 5× WS2812B (NeoPixel-compatible) addressable LEDs.
- Little Bird Lorikeet WS2812B Rainbow Board with Right Angle Header ($3.50) — Lorikeet version with a right-angle header.
- Little Bird Macaw WS2812B Rainbow Board 3 LED ($1.30) — compact 3× WS2812B addressable LED board.
- Little Bird Toucan 8 x APA102 RGB LED ($11.65) — Raspberry Pi add-on with 8× APA102 smart LEDs.
Breakout / interface boards
- Little Bird Breakout Nest for Raspberry Pi ($26.35) — Raspberry Pi GPIO breakout for easier external wiring.
- Little Bird Breakout Board for XBee Module ($0.65) — simple XBee pin breakout to 0.1" headers.
Specialty input board
- ShakeUp Board Only ($38.60) — USB board that appears as a keyboard/mouse and lets you trigger inputs using alligator clips.
Which type of “Little Bird board” are you after?
Collections
Showing 61-80 of 992 products · 723 unavailable products hidden
Grabber Bot
Think of this as an analogue robot. Wood and string combine to make a precision grabbing device. The builder controls the bot with levers and string making a very satisfying and ingenious kit.14x13x2" box.Fun, hands-on learning at its best. Building models decreases stress, increases focus, or...
Plasma 2040
Swathe everything in rainbows with this all-in-one, USB-C powered controller for WS2812/Neopixel and APA102/Dotstar addressable LED strip. Plasma 2040 is a RP2040-based driver board for addressable LED strip (also known as magical rainbows by the metre). It's designed to make rigging up bits ...
Rainbow HAT
Rainbow HAT is a feature-packed add-on board for the Raspberry Pi, loaded with sensors, inputs, displays, and LEDs. Use it as a weather station, clock, timer, mood light, or as a hands-on introduction to multiple Pi communication protocols including SPI, I²C, GPIO, and PWM. Originally developed ...
1N4004 Diode
A general-purpose 1N4004 rectifier diode rated for 1 A continuous forward current and 400 V peak reverse voltage. A versatile component for reverse polarity protection, flyback protection across inductive loads, and AC-to-DC rectification circuits. Specifications Part Number: 1N4004 Max Forwa...
Sound module
This compact sound module lets a microcontroller detect the presence of loud sounds using its onboard microphone.It is designed for sound detection rather than audio recording or interpretation. An Arduino can read the module to respond to noise events, but it cannot directly interpret or record ...
Pibow PiTFT+
Support and protect your PiTFT+ and Raspberry Pi with this stylish and unique case! Features Compatible with Raspberry Pi 3 B+, 3, & 2, but not with the original model B or B+ Custom top layers provided for both the 2.8" 320x240 and the 3.5" 480x320 PiTFT+ variants Protects your beloved ...
Skywriter HAT
The Skywriter HAT uses electrical near-field 3D sensing to detect hand gestures and track position in three dimensions above the board. Powered by the Microchip MGC3130 sensor on a 4-layer PCB, it provides full X, Y, and Z positional data along with gesture recognition for flicks and taps — all w...
Mini Glue Gun
A compact 30W glue gun perfect for craft projects, repairs, and DIY tasks around the home or workshop. Features a trigger-controlled glue feed for precise application. This mini glue gun heats up quickly and works with standard 7mm diameter glue sticks. Two glue sticks are included to get you st...
Tattu 1050mAh
Tattu 3S 11.1V 1050mAh 75C LiPo Battery (XT-60)The Tattu 3S 1050mAh LiPo battery is a compact powerhouse designed with Micro UAVs and high-performance RC applications in mind. With a discharge rate of 75C (and a burst rate of 150C), this pack delivers serious punch while keeping the weight down—j...
4Ω 6W Speaker
This compact enclosed speaker delivers clear audio output at up to 6W with a 4Ω impedance, suitable for a wide range of DIY audio and display projects. It comes with a JST PH 2-pin input cable for easy connection to amplifier boards and audio-capable development boards. Key Features Enclosed D...
Active Buzzer
A simple 5V active buzzer that generates a tone using its built-in oscillator. Just apply a DC voltage and it sounds — no additional signal generation or driver circuit required. Ideal for adding audible alerts, alarms, or feedback tones to Arduino and microcontroller projects. Key Features Ac...
Turing Tumble
Build marble-powered mechanical computers while solving logic puzzles. Turing Tumble is a hands-on game for players aged 8 to adult, designed to make computer logic visible and tactile.Using ramps, crossovers, bits, interceptors, gears and gear bits, players can create systems that generate patte...
Micro Servo 9g
This compact 9 g micro servo is an affordable, simple actuator for small mechatronics projects, robot linkages and model mechanisms. It can operate from 3.0 V to 7.2 V, with the supplied feature ratings listed at 6.0 V where noted.A 3-wire cable provides ground, power and control, terminated in a...
Lead CAT 5E 1m
Description: This 1m Cat5 lead is perfect for all your Raspberry Pi networking needs. Features: LEAD, CAT 5E, 1M, BLACK Connector Type A: RJ45 Plug Connector Type B: RJ45 Plug Cable Length - Imperial: 3.28ft Cable Length - Metric: 1m Jacket Colour: Black Cable Assembly Type: Network ...
RGB LED Module
This RGB LED module gives your microcontroller project a simple way to add full-colour light. It uses a common-cathode through-hole RGB LED, with separate red, green and blue channels for mixing colours.Each colour channel has a built-in current-limiting resistor, helping protect the LED from bur...
Lead CAT 5E 5m
This 5 metre Cat5e lead is a handy network cable for longer Raspberry Pi setups, desktop projects, routers, switches and other RJ45 networking gear.It has RJ45 plugs on both ends and a black jacket, making it suitable for straightforward wired network connections where a 5m run is needed.Features...
automation:bit
The automation:bit is a micro:bit expansion board for controlling and monitoring low-voltage systems up to 24 V. It features analogue and digital inputs, sinking outputs, and a relay — all accessible via 3.5 mm screw terminals. No soldering required. Program it using the block-based Microsoft Ma...
KnockOffDuino®
The KnockOffDuino® Uno is functionally the same as the Arduino Uno R3 at a fraction of the cost. It is the Arduino for beginners and 100% Uno compatible, however it uses the CH340G usb to serial chip instead of the 16u2/8u2 found in the official Arduino Uno R2/R3 so instead of the Arduino Uno ...
Lead CAT 5E 3m
This 3 metre Cat5e network lead is a straightforward way to connect a Raspberry Pi or other Ethernet-ready device to a router, switch or network point.It has RJ45 plugs on both ends, so it suits standard wired networking setups for maker projects, workbenches, classrooms and home networks.The bla...
