All Products
AI Overview
Best all‑purpose resistor assortments
- For general prototyping, the best “one purchase covers most needs” option is the 600pc metal film assortment (30 values, 20 each), 1/4W, 1% tolerance: 600 pack of Resistors! ($11.38).
- If you want organized storage, go for Resistor Kit in Plastic Case with 525pcs, 17 values (0Ω–1MΩ), 1/4W metal film, 1% ($15.02).
- Another broad-value assortment is 1/4 Watt Carbon Film Resistors - 300 Pieces with 300pcs, 60 values (1Ω–10MΩ), carbon film ($11.32).
Popular single values (handy refills)
- 10kΩ pullups/pulldowns: Bulk 10K Resistors - 100 pack (100pcs) ($2.92)
- 220Ω LED current limiting: Bulk 220ohm Resistors - 500 pack (500pcs, 1/4W) ($12.14)
Through-hole resistor packs (easy small quantities)
- Through-Hole Resistors - 100 ohm 5% 1/4W - Pack of 25 ($1.45)
- Through-Hole Resistors - 220 ohm 5% 1/4W - Pack of 25 ($1.45)
- Through-Hole Resistors - 1.0K ohm 5% 1/4W - Pack of 25 ($1.65)
- Through-Hole Resistors - 4.7K ohm 5% 1/4W - Pack of 25 ($1.45)
SMD resistors (surface-mount)
- For 0805 SMD work, SMD Resistor - 0805 ± 5%(500pcs) includes 500pcs, 25 values (620Ω–12kΩ) ($6.10).
High-power resistors
- For load/heat dissipation needs, Power Resistor Kit - 10W (25 pack) includes 10W resistors in 1Ω, 2Ω, 4Ω, 8Ω, 16Ω (5 each) ($19.71).
Collections
Showing 41-60 of 79 products · 21 unavailable products hidden
NEO-F9P GNSS-RTK L1/L5 Breakout with Qwiic
·
Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in challenging environments such as dense city streets.The breakout provides five s...
MicroMod Main Board - Double
·
This Double Main Board is a carrier for SparkFun’s MicroMod ecosystem, letting one MicroMod Processor Board connect to up to two MicroMod Function Boards. The M.2 MicroMod connectors make it straightforward to align the keyed edge connectors and secure the boards with screws.USB-C is provided for...
GNSS Flex pHAT with mosaic-G5 P3 & IM19 IMU
·
Add survey-grade GNSS and inertial navigation to a Raspberry Pi in a compact pHAT format. This kit combines the GNSS Flex pHAT with the SparkPNT mosaic-G5 P3 and IM19 IMU module, pairing Septentrio's compact GNSS receiver with a high-precision IMU for RTK positioning, attitude data and dead recko...
GNSS Flex pHAT with LG580P RTK Heading Module
·
Add precise position and orientation data to a Raspberry Pi with this GNSS Flex pHAT and LG580P module combination. It is built for advanced navigation projects that need centimetre-level RTK positioning plus real-time heading data, such as intelligent robots, precision agriculture systems and au...
GNSS Flex pHAT with ZED-X20P & IM19 IMU
·
Build high-accuracy positioning projects around a Raspberry Pi with this GNSS Flex pHAT and included ZED-X20P and IM19 module. It combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU for centimetre-level positioning, tilt compensation and dead reckoning in demanding naviga...
GNSS Flex pHAT with u-blox ZED-X20P
·
Bring high-precision GNSS to a Raspberry Pi with this GNSS Flex pHAT and u-blox ZED-X20P receiver module. It is built for centimetre-level positioning in demanding navigation and control projects such as UAVs, guidance systems, auto-steering and high-speed robotics.The pHAT connects to a Raspberr...
GNSS Flex pHAT with LG290P RTK & IM19 IMU
·
Build high-accuracy GNSS projects on a Raspberry Pi with this GNSS Flex pHAT and matched LG290P plus IM19 module. It combines Quectel's quad-band LG290P RTK receiver with the Feyman IM19 IMU for centimetre-level positioning, tilt compensation and improved navigation through brief GNSS outages.The...
GNSS Flex pHAT with DAN-F10N Dual-Band GNSS Module
·
Add dual-band GNSS positioning to a Raspberry Pi or similar single-board computer with this SparkPNT GNSS Flex pHAT and DAN-F10N module combination. It pairs a GNSS Flex pHAT carrier with a u-blox DAN-F10N GNSS Flex Module for metre-level L1/L5 positioning in a compact, swappable format.The pHAT ...
NEO-D9S GNSS Correction Data Receiver with Qwiic
·
This NEO-D9S breakout is an L-Band satellite correction data receiver designed to feed correction streams to a compatible multi-band, high-precision GNSS receiver such as the u-blox ZED-F9P. With a clear view of the sky, especially to the south, it can decode L-Band correction broadcasts and help...
USB 2.0 USB-C Connector Breakout Board
·
USB-C is handy for modern projects, but its 24 tiny, tightly spaced pins are not friendly to hand soldering or quick prototyping. This breakout board routes the essential USB-C connections out to a standard 0.1" (2.54mm) pitch so you can work with them on breadboards, perfboards and other prototy...
Portability Shield for SparkFun Development Boards
·
Add the user interface and power features needed to take a compatible SparkFun development board into the field. This shield brings together battery power, charging, storage and controls in a compact add-on board.Power is handled with a LiPo battery connector, charger, fuel gauge and an on/off sw...
14-Segment Alphanumeric Display - Green
·
Add letters, numbers and symbols to your project with this green 14-segment alphanumeric LED display. Compared with a standard seven-segment display, the extra segments make it much easier to show readable characters as well as numerals.The display uses a common-anode configuration and provides f...
Qwiic Directional Pad (PRT-26851)
·
Add five-way navigation input to an I2C project without building a button matrix from scratch. Press up, down, left, right or centre on the low-profile directional pad to send button input to your microcontroller.The board uses a PCA9554 8-bit I2C I/O expander to read the momentary buttons, with ...
Adafruit INA228 85V 20-bit I2C Power Monitor Breakout
·
This breakout brings the INA228 power monitoring chip out to an easy-to-use board for measuring DC current, bus voltage and calculated power on either the high side or the low side of a circuit. It combines a wide common-mode range of up to +85VDC with a 20-bit ADC, giving you precise readings fr...
Electronics Kit for Raspberry Pi Pico
If you're looking for a Raspberry Pi Pico Starter Kit, look no further!This is an awesome and affordable electronics kit for the Raspberry Pi Pico.The components of this Pico Electronics Kit enable you to create electronics circuits for light and sound.Pico Breadboarding can be hard, that's wh...
![PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A [1000C]](/rails/active_storage/representations/redirect/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVGkCIsxJIghwdXIGOwBUSSIMYmxvYl9pZAY7AEY=--0063d525f306a0166b4bf9f99eba9cd17e7b5d4e/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVHsHOgtmb3JtYXRJIghqcGcGOwBUOhJyZXNpemVfdG9fZml0WwdpApABaQKQAUkiCHB1cgY7AFRJIg52YXJpYXRpb24GOwBG--4cc5678865497cdbcf7b02aee5242eda5f847322/image_59bf303f-d541-4951-b179-afe9c9c154c2.jpg)
PowerBoost 1000 Charger - Rechargeable 5V Lipo USB Boost @ 1A [1000C]
·
The PowerBoost 1000C is a DC/DC boost converter with a built-in LiPo battery charger and smart load-sharing circuit. It takes any 3.7V LiIon/LiPoly battery and boosts the output to 5.2V for powering 5V projects like Arduino, Raspberry Pi, or BeagleBone — even while the battery is charging. The l...
Electronics Kit for Raspberry Pi Pico W
If you're looking for a Raspberry Pi Pico W Starter Kit, look no further!This is an awesome and affordable electronics kit for the Raspberry Pi Pico W.The components of this Pico W Electronics Kit enable you to create electronics circuits for light and sound.Pico Breadboarding can be hard, tha...
RGB LED Module
This RGB LED module gives your microcontroller project a simple way to add full-colour light. It uses a common-cathode through-hole RGB LED, with separate red, green and blue channels for mixing colours.Each colour channel has a built-in current-limiting resistor, helping protect the LED from bur...
Resistor 100 Ohm 1/4 Watt PTH - 20 pack (Thick Leads)
These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 100 ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with...
Mongoose OS Google IoT Core Pack w/ Adafruit Feather HUZZAH32
·
The Mongoose OS Google IoT Core Pack is a complete starter kit for building IoT projects with Google Cloud, built around the Adafruit Feather HUZZAH32 (ESP32). Developed in collaboration with Google and Mongoose OS, this kit includes a pre-soldered ESP32 Feather board along with sensors, actuator...
