All Products

SKU: SF-PRT-21505 · MPN: PRT-21505

This 12-position screw terminal block is a simple way to make secure wire connections on a PCB or prototyping board. Each position uses a screw clamp, making it handy for bringing external wiring into a circuit without soldering the wire directly to the board.The 3.5mm pitch is designed to line u...

SKU: SF-SPX-21226 · MPN: SPX-21226

This handy kit gives you a simple way to compare and tune the brightness of your own LEDs, helping you avoid a project full of mismatched indicator lights. It was originally designed for side-by-side LED testing and is especially useful when choosing resistor values or learning how brightness cha...

SKU: SF-PRT-28765 · MPN: PRT-28765

This aluminium hex standoff is a compact threaded spacer for stacking and mounting small boards. It is 16.0mm long, measures 4.5mm across the flats, and is tapped through for an M2.5-0.45 screw.It is well suited to mounting pHATs onto Raspberry Pi boards, giving the add-on board a neat, supported...

SKU: SF-PRT-28005 · MPN: PRT-28005

This spacer board gives your FPGA stack a little extra breathing room. It adds 5.6mm of space between stacked boards, helping make room for the included heatsink.It is also handy when you need clearance for cables between the Ft and port 1 on the Hd, keeping your stacked Alchitry setup easier to ...

SKU: SF-PRT-28007 · MPN: PRT-28007

Add a bit of protection and a cleaner finish to your Alchitry board with this standoff hardware. It is designed for use with compatible Alchitry boards, helping lift the PCB off your work surface or enclosure base.The bolts protrude about 2mm below the board, which is just further than the lowest...

SKU: SF-PRT-27882 · MPN: PRT-27882

This adapter lets you use new Alchitry V2 boards with older Alchitry V1 add-on boards. It is designed as a bridge between the updated V2 connector layout and the original V1-style add-on ecosystem.The board has the new style connectors on the bottom for the V2 board, and the old style connectors ...

SKU: SF-PRT-25464 · MPN: PRT-25464

This threaded hex standoff is a simple hardware spacer for mounting circuit boards, panels and small electronics assemblies.It is 0.750 in (19.05 mm) long between boards and tapped for a #4-40 screw, making it useful for lifting a PCB off a workbench or securing it inside an enclosure.Made from a...

SKU: SF-PRT-18704 · MPN: PRT-18704

This compact pure copper heatsink is designed to help draw heat away from small boards and ICs in tight electronics builds.The self-adhesive backing makes it straightforward to attach to a suitable flat component or board area without extra mounting hardware.Features:Self-adhesive: Designed for s...

SKU: AF-2841 · MPN: ADA2841

Add individually addressable RGB plus white lighting to your project with this flexible NeoPixel strip. Each pixel combines red, green, blue and white elements, giving you colourful effects plus a dedicated white channel for brighter white tones.This version is a 1 metre strip with 60 LEDs per me...

SKU: AF-2846 · MPN: ADA2846

Add individually addressable RGB plus white lighting to your project with this flexible NeoPixel strip. Each pixel contains red, green, blue and white LEDs, giving you colourful effects plus a dedicated white channel for brighter, cleaner white output.This version has 60 LEDs per metre, a clear w...

SKU: AF-6016 · MPN: ADA6016

This ultra-high-density NeoPixel strip packs 180 miniature RGB LEDs into a 1 metre length, with a milky silicone bead coating that helps create a smoother, more continuous colour gradient than classic pixel strips.The strip is 10mm wide and supplied on a reel with three 10cm colour-coded wires, a...

SKU: AF-2839 · MPN: ADA2839

Add individually addressable colour and white light to your project with this flexible NeoPixel RGBW LED strip. Each 5050-sized pixel contains red, green, blue and white LED elements, giving you colourful effects plus a dedicated white channel for brighter, cleaner white lighting.This is the 60 L...

SKU: AF-2836 · MPN: ADA2836

Add individually addressable red, green, blue and white pixels to costumes, signs, props and ambient lighting projects. Each NeoPixel contains separate RGB and white emitters, so you can create colourful effects as well as cleaner white highlights from the same flexible strip.This version has a w...

SKU: SF-TOL-20687 · MPN: TOL-20687

Make U.FL connector handling a little less nerve-racking with this compact extraction jig. It is designed to help connect and withdraw tiny U.FL connectors from a seated position, reducing the chance of tearing a surface-mount connector off your board.The L-shaped bending portion hooks onto the c...

SKU: SF-TOL-25937 · MPN: TOL-25937

This wood surfacing cutter is made for CNC work where you want to flatten a wasteboard or put a clean finish on end grain timber projects. Its razor-sharp, indexable carbide tips are suited to making light work of lumber on compatible machines.Each bit comes with 4 indexable inserts, so the cutti...

SKU: SF-PRT-30218 · MPN: PRT-30218

This 6-pin male header is a simple, reliable connector for linking components, boards or cables in electronics projects.The right-angle layout routes the pins parallel to your PCB, making it useful for low-profile builds or for bringing connections out sideways instead of vertically.With a single...

SKU: SF-PRT-28381 · MPN: PRT-28381

This is a single-row straight male header with 14 breakaway pins on standard 0.1 inch (2.54mm) spacing. It is suited to through-hole prototyping, module headers and breadboard-friendly maker projects.The 14x1 format is commonly used with Teensy 3.2 and Teensy 4.0 boards. If you are fitting header...

SKU: SF-PRT-28382 · MPN: PRT-28382

This is a single-row strip of straight male breakaway header pins, useful for adding standard through-hole connections to development boards and maker projects.The header uses standard 0.1" (2.54mm) spacing and comes in a 24x1 format. This size is normally used with Teensy 3.5, Teensy 3.6 or Teen...

SKU: SF-PRT-27906 · MPN: PRT-27906

This single-row female header provides 20 straight receptacles on standard 0.1 inch (2.54 mm) spacing, making it useful for prototyping, repairs and custom board connections.The strip can be cut down to the length you need with a pair of wire cutters. Please note that you will probably lose one p...

SKU: SF-PRT-27908 · MPN: PRT-27908

This is a straightforward 3-pin male through-hole header for adding standard pin connections to a PCB, breakout board or prototype.The pins use the common 0.1" spacing, making the header suitable for breadboard-friendly layouts and many maker electronics projects.If you do not need all three posi...