All Products

SKU: AF-2787

A pack of 25 through-hole 100 kΩ resistors — an essential component for voltage dividers, pull-up/pull-down circuits, and general electronics projects. The 0.4 mm lead diameter fits standard solderless breadboards perfectly. Specifications Resistance – 100 kΩ Tolerance – ±5% Power Rating – ¼...

SKU: AF-4293

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!This is a 25 Pack of 100Ω Resistors. More specifically, they are carbon film, through-hole axial type, with 1/4 Watt max dissipation, 300V max voltage, 5% precision resistors...

SKU: AF-4294

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!This is a 25 Pack of 1.0KΩ Resistors. More specifically, they are carbon film, through-hole axial type, with 1/4 Watt max dissipation, 300V max voltage, 5% precision resistor...

SKU: LB-LS0317-330

These are your run-of-the-mill 1/4 Watt  5-band resistors. Commonly used in breadboards and other prototyping applications, these 330 ohm resistors make excellent LED current limiters and are great for general use. These thick-lead versions of the resistors fit snugly into a breadboard wi...

SKU: LB-LS0317-47

These are your run-of-the-mill 1/4 Watt  5-band resistors. Commonly used in breadboards and other prototyping applications, these 47 ohm resistors are great for general use. These thick-lead versions of the resistors fit snugly into a breadboard with very little movement, so you should have ...

SKU: LB-10M-RESISTOR

A pack of ten 10MΩ (10 megaohm) carbon film resistors rated at 0.25W (¼W) with 1% tolerance. This very high resistance value is commonly used in high-impedance input buffers, electrostatic discharge protection, and leakage current sensing circuits. Key Features 10MΩ, 1% Tolerance – Very high r...

SKU: LB-10M-RESISTOR-500

A bulk pack of 500 × 10MΩ (10 megaohm) carbon film resistors rated at 0.25W (¼W) with 1% tolerance. Ideal for production runs, classroom kits, or stocking up the parts bin. This very high resistance value is commonly used in high-impedance input buffers, electrostatic discharge protection, and le...

SKU: AF-2349

This Reflective IR Sensor is a simple plastic casing with two elements - an IR LED and an IR phototransistor. You can control the IR LED and turn it on to bounce IR off objects to determine their reflectivity. White & light colored stuff will bounce the light, so  you can detect it. Black & ...

SKU: SF-KIT-21301

A note for SparkFun Inventor's Kit v4.1 users: The only change that was made from the SIK v4.1 to the SIK v4.1.2 is our new carrying case. All of the internal parts and instructional guide have remained the same! The SparkFun Inventor's Kit (SIK) is a great way to get started with programmi...

SKU: SF-PRT-26851 · MPN: PRT-26851

Add five-way navigation input to an I2C project without building a button matrix from scratch. Press up, down, left, right or centre on the low-profile directional pad to send button input to your microcontroller.The board uses a PCA9554 8-bit I2C I/O expander to read the momentary buttons, with ...

SKU: AF-5832 · MPN: ADA5832

This breakout brings the INA228 power monitoring chip out to an easy-to-use board for measuring DC current, bus voltage and calculated power on either the high side or the low side of a circuit. It combines a wide common-mode range of up to +85VDC with a 20-bit ADC, giving you precise readings fr...

SKU: RP-PICO-ELEC

If you're looking for a Raspberry Pi Pico Starter Kit, look no further!This is an awesome and affordable electronics kit for the Raspberry Pi Pico.The components of this Pico Electronics Kit enable you to create electronics circuits for light and sound.Pico Breadboarding can be hard, that's wh...

SKU: AF-2465

The PowerBoost 1000C is a DC/DC boost converter with a built-in LiPo battery charger and smart load-sharing circuit. It takes any 3.7V LiIon/LiPoly battery and boosts the output to 5.2V for powering 5V projects like Arduino, Raspberry Pi, or BeagleBone — even while the battery is charging. The l...

SKU: RP-PICO-W-ELEC

If you're looking for a Raspberry Pi Pico W Starter Kit, look no further!This is an awesome and affordable electronics kit for the Raspberry Pi Pico W.The components of this Pico W Electronics Kit enable you to create electronics circuits for light and sound.Pico Breadboarding can be hard, tha...

SKU: LB-LR0013

An RGB LED module with a common-cathode full-colour LED and built-in current-limiting resistors for each channel. Control the red, green, and blue channels independently via PWM to mix any colour. Compatible with Arduino and other 5 V microcontrollers. Key Features Full-Colour RGB LED – Common...

SKU: SF-PRT-14493

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 100 ohm resistors make excellent pull-ups, pull-downs and current limiters. These thick-lead versions of the resistors fit snugly into a breadboard with...

SKU: AF-3606

The Mongoose OS Google IoT Core Pack is a complete starter kit for building IoT projects with Google Cloud, built around the Adafruit Feather HUZZAH32 (ESP32). Developed in collaboration with Google and Mongoose OS, this kit includes a pre-soldered ESP32 Feather board along with sensors, actuator...

SKU: AF-3487

This 30mm translucent green arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with resistors are embedded in the button body, ready to light up from a microcontroller pin or direct 5V power at just 10mA draw. The button screws into place through material up...

SKU: AF-3491

This 30mm translucent clear arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with resistors are embedded in the button body, ready to light up from a microcontroller pin or direct 5V power at just 10mA draw. The button screws into place through material up...

SKU: AF-3490

This 30mm translucent blue arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with resistors are embedded in the button body, ready to light up from a microcontroller pin or direct 5V power at just 10mA draw. The button screws into place through material up ...