SparkFun
330 Ohm Isolated Resistor Array 8-Element 16-Pin SMD
· MPN: COM-30221
This isolated resistor network packages eight individual 330 Ohm resistors into one compact 16-pin, 2506 surface-mount component.Each resistor element is rat...
Get notified when back in stock
This isolated resistor network packages eight individual 330 Ohm resistors into one compact 16-pin, 2506 surface-mount component.
Each resistor element is rated for 63mW with a ±5% tolerance, making the array useful for designs that need several matching pull-up, pull-down, or line-terminating resistors.
It is well suited to high-density PCB layouts where using a single resistor array can simplify routing and reduce the number of separate components on the board. A datasheet is available from the manufacturer for footprint and assembly details.
Features:
- Isolated network: Eight individual resistors in one package.
- Compact SMD package: 16-pin, 2506 surface-mount component.
- PCB-friendly: Ideal for high-density PCB layouts.
- Common resistor roles: Suitable for multiple pull-up, pull-down, or line-terminating resistors.
Specifications:
- Circuit Type: Isolated
- Resistance: 330 Ohms
- Tolerance: ±5%
- Number of Resistors: 8
- Number of Pins: 16
- Power Per Element: 63mW
- Temperature Coefficient: ±200ppm/°C
- Operating Temperature: -55°C ~ 125°C
- Mounting Type: Surface Mount
- Dimensions: 0.252" L x 0.063" W (6.40mm x 1.60mm)
- Height - Seated (Max): 0.028" (0.70mm)
- Mfg #: 742C163331JP
A handy passive component for compact electronics, LED current-limiting groups, signal termination, and digital I/O pull resistor networks.
Jargon buster
Plain-language definitions for the technical terms used above.
- LED
- A light-emitting diode (LED) is a small electronic component that emits light when current flows through it in the correct direction. Because it only conducts one way, its polarity matters, and a through-hole LED must be soldered the correct way around to light up.
- PCB
- A printed circuit board (PCB) is a board, usually rigid, with etched copper tracks that connect electronic components together without loose wiring. Components are mounted on the board and signals route between them through the copper layout.
- SMD
- SMD means surface-mount device, a component style designed to be soldered directly onto the surface of a circuit board rather than through holes. SMD parts are compact and mounted flat on the board, which suits smaller and mass-produced designs.
- Tolerance
- Tolerance tells you how far the real resistance value may be from the printed value. A 1% resistor is useful when a circuit needs more predictable behaviour than a looser 5% or 10% part.
Find this product in
330Ω Resistor Array Datasheet
Datasheet · 1.0 MB · Click any page to view full size
Supplier page — sparkfun.com
Supplier Description · 329.4 KB · Click any page to view full size
