All Products

SKU: AF-1440

A 16mm illuminated pushbutton with a built-in green LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independentl...

SKU: AF-1439

A 16mm illuminated pushbutton with a built-in red LED and momentary action. The switch contacts connect only while the button is held down and return to their normally-open state when released — perfect for trigger inputs, action buttons, and interactive controls. The LED is wired independently ...

SKU: AF-3487

This 30mm translucent green arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with resistors are embedded in the button body, ready to light up from a microcontroller pin or direct 5V power at just 10mA draw. The button screws into place through material up...

SKU: AF-3491

This 30mm translucent clear arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with resistors are embedded in the button body, ready to light up from a microcontroller pin or direct 5V power at just 10mA draw. The button screws into place through material up...

SKU: AF-3490

This 30mm translucent blue arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with resistors are embedded in the button body, ready to light up from a microcontroller pin or direct 5V power at just 10mA draw. The button screws into place through material up ...

SKU: AF-3489

This 30mm translucent red arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with a ~1K resistor are embedded in the button body in a series configuration, drawing just 5mA from a 5V supply. The button screws into place through material up to ~20mm thick, co...

SKU: AF-3488

This 30mm translucent yellow arcade button has built-in LEDs for a beautiful illuminated look. Two surface-mount LEDs with a ~1K resistor are embedded in the button body in a series configuration, drawing just 5mA from a 5V supply. The button screws into place through material up to ~15mm thick,...

SKU: AF-1505

A clean, rounded 16mm panel-mount momentary pushbutton in black. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. Key Features Momentary Action – Normally open; contacts connect only while pr...

SKU: AF-1503

A clean, rounded 16mm panel-mount momentary pushbutton in burgundy. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. Key Features Momentary Action – Normally open; contacts connect only while...

SKU: AF-1502

A clean, rounded 16mm panel-mount momentary pushbutton in yellow. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. Key Features Momentary Action – Normally open; contacts connect only while p...

SKU: AF-1504

A clean, rounded 16mm panel-mount momentary pushbutton in green. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. Key Features Momentary Action – Normally open; contacts connect only while pr...

SKU: AF-1445

A clean, rounded 16mm panel-mount momentary pushbutton in red. This normally-open micro-switch connects the contacts only while pressed, making it a straightforward input for any project enclosure or control panel. Key Features Momentary Action – Normally open; contacts connect only while pres...

SKU: AF-4352

Build a handheld light-up button controller with this complete kit that pairs the Adafruit 4×4 NeoTrellis RGB Driver with a Feather M4 Express inside an elegant laser-cut acrylic enclosure. The 16 silicone buttons each have individually addressable NeoPixels underneath, and the seesaw I2C chip ha...

SKU: SF-COM-11273

This large 100 mm yellow dome pushbutton is hard to miss and satisfying to press. It features a built-in LED indicator, a pre-installed long-life microswitch, and a polycarbonate lens cap for optical clarity. The height can be adjusted to a low-profile configuration by removing the middle ring. ...

SKU: AF-491

A button is a button, and a switch is a switch, but this LED illuminated arcade buttons is in a class of its own. It's similar in size to an arcade button (and will fit in holes drilled for 'standard' 30mm buttons) but has a built in LED that can be controlled separately from the switch action - ...

SKU: LB-LS1025

The 2-Player DIY Arcade Joystick Kit includes everything you need to build your own retro arcade controls. With 20 LED arcade buttons, two joysticks (red and blue), two USB encoders, and all necessary cabling, this kit is ready to connect to a Raspberry Pi, PC, or Mac. The USB encoders present a...

SKU: AF-1152

These quick-connect wire pairs make wiring arcade-style and metal buttons fast and simple. Each wire comes as a pair with two 0.11" quick-connect terminals pre-crimped onto 20cm long wires, terminated together in a JST 2.5mm 2-pin connector that's breadboard compatible (fits 0.1" headers). The 0...

SKU: AF-4372

This laser-cut acrylic enclosure kit turns your 8×8 NeoTrellis setup (four 4×4 NeoTrellis boards) into a handheld device with an elegant black and white design and beautifully diffused button illumination. Designed to house any Adafruit Feather board (except FONA) alongside four NeoTrellis RGB Dr...

SKU: AF-4979

The NeoKey FeatherWing adds two mechanical key switch sockets with individually addressable NeoPixel backlighting to any Feather-format microcontroller. Each socket accepts Cherry MX or compatible switches (Kailh, Gateron, etc.) without soldering, using Kailh hot-swap sockets. A reverse-mount Ne...

SKU: DF-TEM2022C-EN-1

The Hackster and DFRobot EEDU Environmental Sensor Kit provides everything you need to get started with IoT environmental monitoring using an ESP32-based FireBeetle board. Build practical projects that monitor soil moisture, air quality, and environmental conditions in real time. The kit centres...