All Products
AI Overview
Popular DFRobot picks (by project type)
- Power / off-grid: DFRobot Solar Power Manager Kit with 9V Panel (9V panel, compact solar power management) — $115.05.
Industrial / outdoor sensing (RS485 / IP-rated)
- Weather station (all-in-one): DFRobot Ultrasonic 7-in-1 RS485 Weather Sensor (7-in-1, RS485) — $612.20.
- Water turbidity: DFRobot SEN0710 RS485 Industrial Turbidity Sensor (0-1000 NTU) (0–1000 NTU, RS485) — $563.00.
- Water conductivity (EC): DFRobot RS485 Industrial Water EC Sensor K=1 (K=1, pre-calibrated, RS485) — $366.35.
- Water pH: DFRobot RS485 Modbus IP68 Water Quality pH Sensor (IP68, Modbus-RTU/RS485) — $317.15.
- Water ORP: DFRobot Industrial RS485 ORP Sensor - IP68 ModBus-RTU (IP68, Modbus-RTU/RS485) — $440.10.
- Ultrasonic ranging (IP67): DFRobot SEN0627 Small-Angle Ultrasonic Ranging Sensor 8m IP67 (25–800 cm, IP67, 15° FOV) — $291.05.
- Non-contact liquid level (radar): DFRobot SEN0676 80GHz mmWave Liquid Level Sensor - 40m UART (80GHz FMCW, up to 40 m, UART) — $145.05.
Wireless / IoT
- Private LoRaWAN gateway (EU868): DFRobot LoRaWAN Gateway with SIoT & Node-RED - EU868 (EU868, SX1302 8-channel, local server + Node-RED) — $366.35.
- BLE sensor broadcasting (5-pack): DFRobot Fermion BLE Sensor Beacon Pack - 5 Pack (turn 3.3V sensors into BLE nodes) — $41.55.
Robotics / UI / modules & accessories
- IMU + barometer: DFRobot Gravity 10DOF IMU AHRS (BNO055 + BMP280) (BNO055 orientation + BMP280 pressure/temp) — $63.65.
- ESP32 touchscreen: DFRobot DFR1092 3.5-inch IPS Touch Screen for ESP32 (3.5" IPS, 480×320, capacitive touch) — $73.50.
- Wiring (Gravity → DuPont): DFRobot Gravity PH2.0 to Male DuPont Tagged Cables 30cm - 5 Pack (30 cm, tagged signal labels, 5-pack) — $16.00.
- Lighting: DFRobot FIT0840 5V Flexible LED Strip, Purple - 60 LEDs/m (5V, 60 LEDs/m, ultra-thin) — $14.50.
Edge AI / vision
- Offline face/palm/QR recognition: DFRobot SEN0677 Offline AI 3D Vision Recognition Sensor (on-device AI, face + palm vein + QR decode) — $120.45.
Collections
Showing 361-380 of 1743 products · 176 unavailable products hidden
Waterproof DS18B20 Sensor Kit
A waterproof DS18B20 digital temperature sensor kit with everything you need to connect to an Arduino. The stainless steel probe measures temperatures from -55°C to +125°C over a 1-Wire interface, requiring just one digital pin for communication. Multiple sensors can share the same data pin thank...
Female Housing Pin(PH2.54)-1P
This is a 1-pin female housing pin with the pitch of 2.54mm(0.1"). You can make customized cables that mate with the 0.1"-spaced pins. NOTE: Does not include metal crimp pins (Crimp Pins for Female Housing Pins(PH2.54)) SPECIFICATIONS Material: Plastic Pitch: 2.54mm/ 0...
Arduino Nano IO Sensor Shield
The Arduino Nano I/O Sensor Shield acts as an expansion board for the Arduino Nano and DFRduino Nano microcontrollers. There are several different options for power input. The form factor of the Nano I/O Shield board is the same as the Arduino UNO/arduino Leonardo. In addition, the sensor shi...
MAX98357 I2S Amplifier Module
This I2S digital amplifier based on the MAX98357 I2S Class D amplifier module works great with microcontrollers with I2S audio outputs like ESP32 and can be applied to projects like IoT nodes, smart home devices, Bluetooth audio players, and so on. The module supports a 3.3V-5V power supply. And ...
9g Servo for Maqueen Mechanic
This compact 9g servo is designed for the Maqueen Mechanic system, giving your Maqueen Plus smooth, reliable movement for add-on mechanical builds.It uses high-quality metal gears and a metal servo connecting plate, with four M3 threaded holes to make installation straightforward. The servo suppo...
DC Barrel Jack Adapter - Male
This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the simple solution. Wi...
2.7 OLED 12864 Display Module
A 2.7" white OLED display module with 128×64 pixel resolution, driven by the SSD1325 controller. The OLED technology delivers deep blacks, wide viewing angles, and a slim profile — with no backlight required, the display is thinner and lighter than comparable LCDs. Connects via hardware SPI for ...
Smart Multifunctional Charger
The LiitoKala Lii-402 is a four-slot smart charger that supports Li-ion, Ni-MH, and LiFePO4 rechargeable batteries. It automatically identifies Li-ion and Ni-MH battery types, with manual mode selection for LiFePO4 and 3.85 V Li-ion cells. Four LED indicators display charging progress at 25%, 50%...
Gravity: UART I2C NFC Module
Gravity: UART & I2C NFC Module adopts NXP PN532, a highly integrated NFC communication controller, which supports various types of NFC smart cards or tags like the commonly used MIFARE Classic series and NTAG series in the market. Apart from the large PCB antenna design of better communication ar...
Light Disc with 7 SMD RGB LED
This fantastic light disc consists of 7 SMD RGB LED. It illustrates a beautiful color combination much better than traditional RGB led. You can control the LEDs via the RGB pins. By pulse-width-modulating the pins any color can be created by mixing different amounts of red, green, and blue. Runn...
Infrared Photoelectric Switch
This infrared photoelectric switch consists of a transmitter and receiver pair that detects objects at distances up to 1.5 m with a response time under 1 ms. The infrared beam provides stable detection regardless of ambient lighting, making it suitable for both indoor and outdoor use across a −20...
_1220x813.jpg.webp)
UNIHIKER K10 AIoT Starter Kit
·
Built around the UNIHIKER K10, this DFRobot learning kit is designed to help beginners and makers explore modern smart hardware, IoT and artificial intelligence projects in one structured package.The kit includes six distinctive modules such as a millimetre wave human presence sensor, clutch serv...
LED Current Meter 50A (Green)
This panel-mount LED current meter displays DC current readings from 0 to 50A on a bright green 3-digit LED display. It features reverse connection protection to prevent damage, and requires just four wires to install — no additional circuitry or components needed. With a 4–30V DC power supply r...
UPS HAT for Raspberry Pi Zero
DFRobot UPS HAT is an uninterruptable power supply shield designed for the Raspberry Pi Zero series, and also compatible with Pi 2/3/A+. The UPS HAT can continue to provide power to the Raspberry Pi for a certain period of time when the system is powered off, by which to avoid system damage and a...
Gravity:TT Motor Encoders Kit
The Gravity:TT Motor Encoders Kit provides rotation tracking for TT motors, giving you accurate angular displacement data using a non-contact sensing method. Ideal for robotics projects where you need to measure wheel rotation and distance travelled. The kit uses the Gravity interface for plug-a...
LED Current Meter 10A (Green)
A panel-mount LED current meter that measures 0–9.99 A DC with 2% accuracy. The bright green 3-digit LED display is easy to read, and the meter requires no external circuitry — just connect four wires and it gives a reading straight away. Designed for embedding into enclosures and panels, the me...
HRLV - MaxSonar - EZ (MB1013)
The HRLV-MaxSonar-EZ (MB1013) is a high-resolution ultrasonic distance sensor with 1 mm resolution and a range of up to 5 metres. It features multiple output formats, internal temperature compensation, virtually no dead zone, and a calibrated beam pattern — making it an excellent all-round choice...
Silicone Sleeve for HUSKYLENS
This custom-fit silicone sleeve protects the DFRobot HUSKYLENS AI camera from drops, bumps, dust, and splash water. The soft, stretchy silicone fits snugly around the board while leaving all ports and interfaces fully accessible. The sleeve features a matte-finish coating that resists dust and f...
FT232 USB to TTL Serial Cable
Introduction This product converts from USB output to TTL output, supports three levels, facilitates communication between PC and serial port, does not need an external crystal oscillator, has high stability and strong anti-interference. Specification VCC output: 5V/3.3V/1.8V TTL output: 5...
Gravity I2C OLED-2864 Display
The Gravity I²C OLED-2864 is a 0.96″ blue OLED display module driven by the SSD1306 controller. It communicates via I²C and refreshes at up to 60 Hz, making it ideal for real-time data readouts on Arduino and other microcontroller projects. The module uses the Gravity I²C interface for plug-and-...
