All Products
Showing 1-20 of 60 products
Ethernet Adapter for Teensy 4.1
·
This adapter makes it straightforward to add a wired Ethernet connection to a Teensy 4.1. It brings the functionality of the Ethernet Kit for Teensy 4.1 onto a single board, helping you get a network-capable setup together with less assembly.The tricky parts are already taken care of, with the RJ...
Ethernet Kit for Teensy 4.1
The Teensy 4.1 is one of the most advanced and reliable development platforms on the market today. One of the biggest asks for the board is the ability to connect the 4.1 to the Internet via Ethernet. Luckily, with all the parts included in this kit (as well as a little bit of soldering), you'...
Teensy 4.1 Lockable Microcontroller Board
·
This lockable Teensy 4.1 is aimed at advanced developers moving from prototype to a secure production design. It keeps the high-performance 600 MHz ARM Cortex-M7 platform of the Teensy 4.1 while adding write access to the chip’s eFuses so your final application can be encrypted and locked to the ...
Teensy 4.1 Lockable Without Ethernet
·
This lockable Teensy 4.1 variant combines the high-performance Teensy 4.1 platform with production-focused code security, while omitting the Ethernet PHY for projects that do not need wired networking. It is built around the NXP MIMXRT1062DVJ6B ARM Cortex-M7 processor running at 600 MHz, with 8 M...
2x3-pin 2mm PTH Header Pins and Socket for Teensy 4.1 Ethernet
·
This header pin and socket set is intended for connecting the Ethernet pins on a Teensy 4.1 to a custom circuit board.The socket is designed to be soldered to the bottom side of the Teensy 4.1, making it useful when you need a neat board-to-board connection for a custom PCB design.Specifications:...
SparkFun Qwiic Shield for Teensy - Extended
An extended Qwiic shield that adds four Qwiic connectors to Teensy 4.1, Teensy 3.6, and Teensy 3.5 boards. Connects the I²C bus (GND, 3.3 V, SDA, SCL) to two horizontal and two vertical Qwiic ports for easy daisy-chaining of I²C sensors and actuators. Includes a PROG button that mirrors the Teen...
OctoWS2811 Adapter for Teensy 3.x & 4.x
·
Build large LED displays with a Teensy using this OctoWS2811 adapter board. It connects Teensy 3.2 through 4.1 boards to thousands of WS2811, WS2812 or NeoPixel-compatible LEDs, with support for driving up to eight strips in parallel via the high-speed OctoWS2811 Library.The adapter acts as an ac...
Teensy Stackable Header Kit (Extended)
These headers are made to work with the Teensy 4.1, Teensy 3.6, and Teensy 3.5 development boards. Each set of headers allows for your Teensy to be easily incorporated into a breadboard circuit or attach a shield on top of the board. This kit includes three headers (two 24-pin, and one 5-pin), en...
Teensy 4.1 (Headers)
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same size ...
Ethernet / USB HUB BOX for Raspberry Pi Zero Series, 1x RJ45, 3x USB 2.0
The ETH-USB-HUB-BOX is a compact hub kit designed specifically for the Raspberry Pi Zero series. It adds a 10/100 Mbps Ethernet port and three USB 2.0 ports to your Pi Zero, making it easy to connect to the internet and plug in USB devices without adapters or dongles. The kit includes the ETH/US...
Teensy 4.1 without Ethernet
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same si...
Teensy 4.1 without Ethernet (Headers)
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same si...
Teensy 4.1
The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, and two new locations to optionally add more memory. The Teensy 4.1 is the same si...
Raspberry Pi CM4 IoT Router Carrier Kit with Case & PiTray Mini
·
This compact kit provides a networking carrier platform for the Raspberry Pi Compute Module 4 series, suited to embedded routing, gateway and edge networking projects. It is designed for dual-gigabit networking using the CM4 built-in Ethernet interface and a PCI Express 1000BASE-T NIC, offering a...
SparkFun QwiicBus Kit
The SparkFun QwiicBus Kit comes with everything you need to get started with the SparkFun QwiicBus system in one handy package. The kit includes two QwiicBus EndPoints, one MidPoint and two 3ft Ethernet cables. The SparkFun QwiicBus EndPoint is the fastest and easiest way to extend the range of ...
Raspberry Pi CM4 IoT Router Carrier Board Mini Kit - US Plug
·
This kit bundles DFRobot’s compact Compute Module 4 IoT Router Carrier Board Mini with a metal cooling case and heat sink, a 5V@3A USB power supply (US Standard), and a USB 3.0 to Type-C cable. It is designed around the Raspberry Pi Compute Module 4 series for building small, capable network appl...
Raspberry Pi CM4 IoT Router Carrier Board Mini Kit (EU PSU)
·
Turn a Raspberry Pi Compute Module 4 into a compact dual-Gigabit router, gateway or IoT platform with this mini carrier board kit from DFRobot. The board connects a Gigabit network card over PCIe, giving the CM4 two full-speed Gigabit Ethernet ports with lower CPU usage and improved long-running ...
Teensy to Arduino R3 Shield Adapter
·
This passive adapter lets a Teensy development board connect to the standard Arduino 1.0 (R3) shield footprint, making it easier to reuse existing Arduino shields without a breadboard full of jumper wires.Solder your Teensy board, sold separately, to the marked footprint on the adapter, then plug...
2x3 Male PTH Header - 2mm Pitch
·
This is a compact 2x3 male through-hole header with 2mm pin spacing, suitable for soldering into compatible PCBs and add-on boards.The connector is unshrouded, uses square male pins, and is designed for simple push-pull mating. It is the same style of header included with the Ethernet Kit for Tee...
CrowPi3 - Al Learning and Development Station - Basic Kit
The CrowPi 3 is an all-in-one portable programming lab with 41 built-in sensors and modules, a 4.3-inch touchscreen, and support for multiple development boards. Compatible with Raspberry Pi 5, micro:bit, Raspberry Pi Pico, and Arduino Nano, it provides a complete platform for learning programmin...
