All Products

SKU: AF-3883

These three Stacking Headers alone are, well, lonely. But pair them with our ItsyBitsy boards, and you're in business! Great for putting something a-top your ItsyBitsy, like this AirLift bitsy add-on. Also works great for 'short' Teensy boards - not Teensy 3.5 or 3.6 long s...

SKU: SF-PRT-17152

These headers are made to work with the Teensy 4.1, Teensy 3.6, and Teensy 3.5 development boards. Each set of headers allows for your Teensy to be easily incorporated into a breadboard circuit or attach a shield on top of the board. This kit includes three headers (two 24-pin, and one 5-pin), en...

SKU: SF-CAB-28389 · MPN: CAB-28389

This adapter cable lets a Teensy 4.1 or Teensy 3.6 use its USB host capability by converting the dedicated 5-pin USB host header connection into a standard female USB Type-A port.Once fitted, your Teensy can act as a USB host for peripherals such as keyboards, mice, MIDI controllers and USB hubs,...

SKU: SF-DEV-17156

An extended Qwiic shield that adds four Qwiic connectors to Teensy 4.1, Teensy 3.6, and Teensy 3.5 boards. Connects the I²C bus (GND, 3.3 V, SDA, SCL) to two horizontal and two vertical Qwiic ports for easy daisy-chaining of I²C sensors and actuators. Includes a PROG button that mirrors the Teen...

SKU: SF-PRT-28382 · MPN: PRT-28382

This is a single-row strip of straight male breakaway header pins, useful for adding standard through-hole connections to development boards and maker projects.The header uses standard 0.1" (2.54mm) spacing and comes in a 24x1 format. This size is normally used with Teensy 3.5, Teensy 3.6 or Teen...

SKU: SF-KIT-15716 · MPN: KIT-15716

This passive adapter lets a Teensy development board connect to the standard Arduino 1.0 (R3) shield footprint, making it easier to reuse existing Arduino shields without a breadboard full of jumper wires.Solder your Teensy board, sold separately, to the marked footprint on the adapter, then plug...

SKU: AF-3200

The Teensy 3.x Feather Adapter rearranges the pins of a Teensy 3.x board to match the Adafruit Feather form factor and pinout. This allows the Teensy to work with the full range of FeatherWing add-ons — motor drivers, GPS modules, LED matrices, OLEDs, and more. The adapter also includes a built-...

SKU: SF-DEV-15421

NOT COMPATIBLE WITH THE TEENSY 4. For compatible version, see Teensy Audio Adaptor Board (Revision D)This is the Teensy Audio Adapter Board that can be added to a Teensy 3.0, 3.1, 3.2, 3.5 or 3.6 for your next audio project. The shield provides you with an easy-to-use tool to add high qualit...

SKU: AF-1902

The SmartLED Shield (V4) provides a simple, solder-free way to connect a Teensy 3.2, Teensy 3.5, or Teensy 3.6 to HUB75 RGB LED Matrix Panels. Just plug in your Teensy, connect your panel, and start displaying graphics, patterns, or animated GIFs using the SmartMatrix Library. The shield include...

SKU: AF-1780

This audio adapter lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with a Teensy 3.2, 3.5 or 3.6. It supports stereo headphone and stereo line-level output, and also stereo line-level input or mono microphone input.The audio chip connects to Te...

SKU: SF-DEV-17119

The SparkFun Qwiic Shield for Teensy adds four Qwiic (I2C) connectors to your Teensy board, providing quick access to the SparkFun Qwiic ecosystem of sensors, actuators, and displays. Sized to fit the Teensy 4.0, Teensy 3.2, and Teensy LC footprints. The shield connects GND, 3.3V, SDA, and SCL f...

SKU: SF-DEV-28370 · MPN: DEV-28370

This lockable Teensy 4.1 variant combines the high-performance Teensy 4.1 platform with production-focused code security, while omitting the Ethernet PHY for projects that do not need wired networking. It is built around the NXP MIMXRT1062DVJ6B ARM Cortex-M7 processor running at 600 MHz, with 8 M...

SKU: SF-PRT-13925

These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield board. This kit includes five headers (two 13-pin, one 7-pin, one 3-pin, and one 2x...

SKU: SF-DEV-28369 · MPN: DEV-28369

This lockable Teensy 4.1 is aimed at advanced developers moving from prototype to a secure production design. It keeps the high-performance 600 MHz ARM Cortex-M7 platform of the Teensy 4.1 while adding write access to the chip’s eFuses so your final application can be encrypted and locked to the ...

SKU: SF-KIT-28373 · MPN: KIT-28373

This kit gathers the small supporting parts needed to complete projects from the official Teensy Audio Tutorial. It is intended for makers who already have a Teensy board and the main audio adapter, but still need the specific buttons, potentiometers and connectors used in the tutorial builds.Ins...

SKU: PL-972

A 300mm (12″) 6-conductor ribbon cable with female 2×3 IDC connectors on each end. Designed to plug into standard 0.1″ (2.54mm) 2×3 shrouded box headers, and also compatible with 0.1″ male header pins. Key Features IDC Connectors – Female 2×3 IDC connector on each end 6 Conductors – Flat ribb...

SKU: SF-DEV-18771

The SparkFun MicroMod Teensy Processor with Copy Protection leverages the awesome computing power of the NXP iMXRT1062 chip and pairs it with the M.2 MicroMod connector to allow you to plug it into your choice of compatible MicroMod Carrier Board. This "copy protection" variant comes with additio...

SKU: SF-DEV-15845

This is the Teensy Audio Adapter Board that can be added to a Teensy 4.0 for your next audio project. The shield provides you with an easy-to-use tool to add high quality 16 bit, 44.1 kHz sample rate audio to your Teensy. With the audio library you will be able to use both the input and outp...

SKU: SF-DEV-20594

The SparkFun DataLogger IoT - 9DoF is a preprogrammed data logger that automatically detects, configures, and logs Qwiic-compatible sensors — all without writing a single line of code. Simply plug in your sensors, power up, and start capturing data to a microSD card or send it wirelessly to your ...

SKU: SF-PRT-28372 · MPN: PRT-28372

Build large LED displays with a Teensy using this OctoWS2811 adapter board. It connects Teensy 3.2 through 4.1 boards to thousands of WS2811, WS2812 or NeoPixel-compatible LEDs, with support for driving up to eight strips in parallel via the high-speed OctoWS2811 Library.The adapter acts as an ac...