All Products

SKU: AF-4174

These three Short Female Headers alone are, well, lonely. But pair them with any of our ItsyBitsy boards, and you're in business! These headers are particularly cute and tiny with a body height of just 5.0 mm they are the best way to minimize the amount of space your ItsyBitsy project takes...

SKU: AF-2187

A custom-made 2×20 short female header designed for surface-mount (SMT) Raspberry Pi HAT designs. This header provides the slimmest possible profile when you need a low-clearance connection between your HAT and a Raspberry Pi. While it requires SMT soldering skills (more challenging than standar...

SKU: AF-3883

These three Stacking Headers alone are, well, lonely. But pair them with our ItsyBitsy boards, and you're in business! Great for putting something a-top your ItsyBitsy, like this AirLift bitsy add-on. Also works great for 'short' Teensy boards - not Teensy 3.5 or 3.6 long s...

SKU: AF-3008

Short female headers designed for tight spaces where standard-height headers won't fit. At just 5mm tall (compared to the standard 8mm), these low-profile headers are ideal for compact builds and slim assemblies. Each header strip is 36 pins long with standard 0.1" (2.54mm) pitch, compatible wit...

SKU: AF-2243

A short-profile 2×20 female through-hole header for connecting Raspberry Pi HATs with minimal height above the board. This custom header provides a slimmer fit than standard-height GPIO headers, ideal for compact enclosures and low-profile builds. Compatible with any Raspberry Pi model featuring...

SKU: AF-2940

These two Short Female Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! These headers are particularly cute and tiny with a body height of just 5.0 mm they are the best way to minimize the amount of space your Feather ...

SKU: AF-4173

These three Short Male Headers alone are, well, lonely. But pair them with our ItsyBitsy boards, and you're in business! These headers are particularly cute and tiny and are designed to match perfectly with our shorty female header kit for ItsyBitsy. Note that you could use normal header...

SKU: EC-CCC12311K

A set of stackable female headers for Arduino UNO and compatible boards. The extended contact length clears the USB-B connector, making them ideal for stacking multiple shields. Details Compatibility – Arduino UNO, Arduino Pro, Arduino Mega Pin Spacing – 0.1″ (2.54 mm) Type – Stackable (exte...

SKU: SF-PRT-11269

This pack of female headers includes two 6-pin headers and two 8-pin headers. This is similar to the header kit that comes with Arduino shields except that the pins are shorter so they don’t stack. These are useful for Arduino compatible boards that don’t come with headers already installed (like...

SKU: EC-DRA09012K

An accessory kit for the Raspberry Pi Zero and Zero W that provides adapters and headers to expand the board's compact connectors to full-size interfaces. Includes a clear acrylic case, USB OTG cable, Mini HDMI adapter, GPIO breakout cable, and a full set of header strips. Key Features USB OTG...

SKU: DF-FIT0146

An 8-pin female header with extra-long legs, designed for stacking Arduino shields. The extended pins pass through to the board below, allowing multiple shields to be stacked on a single Arduino. Pins are spaced at standard 0.1″ (2.54mm) pitch. Specifications Pin Count – 8 pins, single row Pi...

SKU: AF-3417

The FeatherWing Tripler lets you connect a Feather board to two FeatherWings side by side — no stacking headers needed. All three sets of pins are cross-connected, with dedicated GND and 3.3 V strips for easy power distribution. Additional proto holes are available for custom wiring. Comes as a ...

SKU: AF-2886

These two Female Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business! What do they do? They get soldered on either side of the Feather board. Now you can plug in FeatherWings to add more capability to your portable project. Unl...

SKU: SF-PRT-13925

These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield board. This kit includes five headers (two 13-pin, one 7-pin, one 3-pin, and one 2x...

SKU: AF-5584

These two Short Plug / Male Headers alone are, well, lonely. But pair them with the Raspberry Pi Pico, and you're in business! These 2.54mm / 0.1" pitch headers are particularly cute and tiny and are designed to match perfectly with the Pico and our short socket headers. Note that yo...

SKU: SF-PRT-10007

A set of stackable headers designed for the Arduino Uno, Arduino Pro, and other boards using the classic (pre-R3) pin layout. These female headers sit tall enough to clear the USB-B connector, making them ideal for stacking multiple shields. The kit includes two 8-pin and two 6-pin headers — enou...

SKU: PR-PIM247

If you're going to be adding and removing wires to a project, these 2.54 pitch headers are an ideal way to make it easy and reliable. This box has a useful selection. Maker Essentials are components and useful bits for everyday electronics and tech projects. Kit contains  2x male 2.54mm ...

SKU: PL-1039

The hardware kit for the Pololu 3pi robot expansion board. This contains the standoffs, screws, nuts, and headers needed to mount an expansion PCB above the 3pi robot — but does not include the expansion PCB itself. Useful if you're designing your own custom expansion board or need replacement ha...

SKU: PI-COM1104

Absolutely no soldering required! All that's needed is a few gentle taps with a hammer and bazinga! Your header is securely attached to your Pi Zero or pHAT.If your soldering isn't quite up to scratch, or you just don't own a soldering iron yet, then these nifty hammer headers might be just the j...

SKU: AF-1950

Premium female-to-female jumper wires in a convenient 20-pin ribbon cable, perfect for making wire harnesses or jumpering between headers on PCBs. Each wire is 150mm (6") long with 0.1" (2.54mm) female header contacts on both ends, fitting cleanly onto standard-pitch headers. The ribbon strip in...