All Products
Showing 1-20 of 100 products
Gravity: 2.0 Inch IPS Color Serial Display with I2C & UART (Support micro:bit; MakeCode Graphical Programming)
MPN: DFR0997
BITCAR - Autonomous Line Following Obstacle Avoiding Car for micro:bit
Christmas Tree Rainbow LED for micro:bit
micro:bit Expansion Board for Boson (Gravity Compatible)
Omni:bit smart robot car with Mecanum Wheel parts kit
Kitronik ARCADE for micro:bit and MakeCode Arcade
Air:bit 2 micro:bit Drone Kit
MPN: MK-AB-1
Boson Starter Kit for micro:bit
Smart Car Cutebot Robot for micro:bit
Speaker for micro:bit
Spin:bit Kit (without Micro:bit)
Sonar:bit for micro:bit Ultrasonic Sensor Distance Measuring 3V/5V
Neopixel Rainbow LED strip and GVS conector -10 LEDs
Octopus Digital PushButton Brick OBPushButton - Blue
Octopus DS18B20 Digital Temperature Brick
Sensor ELECFREAKS PlanetX MQ3
MPN: EF05032
noise:bit
micro:bit V2- an Educational Creative Tool for Kids
SparkFun Qwiic micro:bit Breakout (with Headers)
SparkFun Qwiic micro:bit Breakout
Gravity: 2.0 Inch IPS Color Serial Display with I2C & UART (Support micro:bit; MakeCode Graphical Programming)
·
A 2.0-inch IPS colour display with 320 × 240 resolution and 16-bit colour depth (RGB565), supporting both I2C and UART communication via the Gravity connector. Powered by an ESP32-S3 chip with integrated LVGL graphics, it includes over 200 built-in icons, GIF animations, and dynamic widgets such ...
BITCAR - Autonomous Line Following Obstacle Avoiding Car for micro:bit
The BitCar is a micro:bit-powered robot car kit featuring autonomous line following, ultrasonic obstacle avoidance, and remote control capabilities. Built around a sturdy chassis with two metal gear motors, the car includes built-in modules for buzzer, line follower, and four addressable RGB LEDs...
Christmas Tree Rainbow LED for micro:bit
The Christmas Tree Rainbow LED is a festive, tree-shaped board featuring 6 individually addressable NeoPixel RGB LEDs. Designed for the BBC micro:bit, it connects with crocodile clips — no expansion board required — and can be programmed with MakeCode to display any colour pattern you like. Key ...
micro:bit Expansion Board for Boson (Gravity Compatible)
The micro:bit Expansion Board for Boson is a carry-on board that connects to the BBC micro:bit via edge connector, replacing crocodile clips with six keyed 3-pin sockets. It is compatible with DFRobot's Boson and Gravity modularised electronic modules, giving access to hundreds of digital and ana...
Omni:bit smart robot car with Mecanum Wheel parts kit
This Omni-directional mobile smart car is made up of 146 blocks, 4 building blocks motors and 4 Omni-directional wheels. With the Super:bit expansion board with powerful motor drive capability, using MakeCode graphical programming, it can easily control its 360° omnidirectional movement by dragg...
Kitronik ARCADE for micro:bit and MakeCode Arcade
Develop your coding skills with the Kitronik ARCADE for BBC micro:bit and MakeCode Arcade, a fully featured programmable gamepad for use with the MakeCode Arcade block editor. The Kitronik ARCADE for BBC micro:bit and MakeCode Arcade is a handheld gaming platform designed specifically for use wit...
Air:bit 2 micro:bit Drone Kit
·
Air:bit 2 is a STEAM drone kit for the BBC micro:bit that students build, code and fly. It combines the approachable micro:bit platform with a hands-on drone project for learning coding, engineering and technology.Note: micro:bits are not included as standard with this kit. The supplier recommend...
Boson Starter Kit for micro:bit
The Boson Starter Kit pairs DFRobot's modular Boson electronic blocks with the BBC micro:bit, giving students and beginners a hands-on introduction to coding and electronics. The kit includes eight sensor and actuator modules covering sound, light, and motion interaction. Modules connect to the ...
Smart Car Cutebot Robot for micro:bit
This fully-assembled and ready-to-rock robot smart car is the nicest we've seen and is incredibly easy to use with a micro:bit and MakeCode. It comes all ready to go, no soldering or screw-driver required. Simply plug in your :bit into the top slot and add three AAA batteries to get moving.The Cu...
Speaker for micro:bit
The MonkMakes Speaker for micro:bit is a compact, amplified speaker that connects to your micro:bit using alligator clips. It's the easiest way to add sound output to your micro:bit projects — just clip on and start coding. With built-in amplification, reverse polarity protection, and an LED pow...
Spin:bit Kit (without Micro:bit)
The Spin:bit kit combines 265 building blocks with a motorised drive and the Super:bit expansion board to create programmable mechanical models. Build a Ferris wheel, gyroscope, fan, or your own custom creations — all controlled by a micro:bit via MakeCode graphical programming. The kit supports...
Sonar:bit for micro:bit Ultrasonic Sensor Distance Measuring 3V/5V
Sonar:bit is a 3-wire ultrasonic distance sensor designed for micro:bit and Arduino projects. Operating on 3–5V, it works directly with both 3.3V and 5V systems using a single GVS cable — saving an I/O port compared to traditional 4-wire ultrasonic modules. With a measurement range of 4–400cm an...
Neopixel Rainbow LED strip and GVS conector -10 LEDs
This NeoPixel-compatible rainbow LED strip features 10 individually addressable WS2812B RGB LEDs with a standard 3-pin GVS connector for easy plug-and-play use. Both ends have connectors, allowing multiple strips to be daisy-chained for longer runs. Designed to work with micro:bit at 3.3V, it's ...
Octopus Digital PushButton Brick OBPushButton - Blue
The Octopus Digital Push Button Brick is a simple momentary button module from ElecFreaks' Octopus series. It connects to Arduino, micro:bit, and other microcontroller boards via a 3-pin buckled connector — no breadboard or soldering required. This blue version features a large button cap for ea...
Octopus DS18B20 Digital Temperature Brick
The Octopus DS18B20 Digital Temperature Brick uses the DS18B20 1-Wire digital temperature sensor from Maxim IC to deliver accurate readings from −55 °C to +125 °C with ±0.5 °C accuracy. Each sensor has a unique 64-bit serial number, allowing multiple sensors to share a single data bus. Designed ...
Sensor ELECFREAKS PlanetX MQ3
·
An alcohol vapour sensor module from the ELECFREAKS PlanetX range, designed for use with micro:bit via an RJ11 connector. The MQ3 sensor uses a tin dioxide (SnO2) sensing element whose conductivity increases with alcohol gas concentration, providing an analog output you can read and process in Ma...
noise:bit
Add sound to your micro:bit projects with noise:bit, a tiny speaker board made for bleeps, bloops, tones and speech.Just slot in your micro:bit and use the sound generation blocks and code in Microsoft MakeCode or MicroPython to create audio in your project. It is handy for simple sound effects, ...
micro:bit V2- an Educational Creative Tool for Kids
The BBC micro:bit V2 is a pocket-sized programmable computer designed to make learning to code fun and accessible. It builds on the hugely successful original with new onboard features including a speaker, MEMS microphone, and a touch-sensitive logo — all packed into a board just 5 × 4 cm. Progr...
SparkFun Qwiic micro:bit Breakout (with Headers)
The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C and SPI buses. We've already attached headers to this version of the board so you d...
SparkFun Qwiic micro:bit Breakout
The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C and SPI buses. This breakout board for the micro:bit’s edge connector allows int...
