All Products

SKU: AF-2697

This USB to 2.1 mm barrel jack cable lets you power 5 V DC devices from any USB port. Simply connect the USB-A end to a computer, USB wall adapter, or USB battery pack, and the barrel jack end to your device. At 1 metre long with 22 AWG wires, it handles higher current draws reliably. The barrel...

SKU: AF-5457

This cable is kinda fascinating - it has an integrated boost converter, so you can plug it into any USB port (from a computer, battery pack, etc), and it will give you a higher DC voltage! It's a handy way to power a 9V or 12V device. Unlike our other 'USB booster' cables, this one comes with ...

SKU: SF-COM-14567

It’s tiny, it’s handy, and it can give your normal USB-equipped device a micro-B connector! With the USB to Micro-B Adapter you can make a flash drive connect to your tablet, connect a keyboard to your phone in order to text with ease, attach a Bluetooth® dongle to your RPi Zero, and more! S...

SKU: PI-ADP006

The USB to microUSB OTG Converter Shim is a tiny adapter that slides inside a full-sized USB-A male connector, converting it into a USB On-The-Go (OTG) compatible microUSB connection. It provides a compact, cable-free way to connect a single USB peripheral directly to a Raspberry Pi Zero or other...

SKU: AF-5995 · MPN: ADA5995

DescriptionWhether you need to interface with various serial protocols, this USB to Multi-Protocol Serial adapter has you covered. It supports RS232, TTL UART, RS485, and RS422, all with quick-connect screw terminals, eliminating the need for soldering or special cables. Simply plug the adapter ...

SKU: AF-5994 · MPN: ADA5994

No matter what serial-esque protocol you need to interface with, this USB to Multi-Protocol Serial adapter cable will be able to get this-connected-to-that. It supports RS232 serial, TTL UART serial, RS485 and RS422. All with quick-connecting screw terminals so you don't need to do any soldering ...

SKU: SF-CAB-11304

There are a lot of devices out there that still communicate over RS232 but we bet your new laptop isn’t one of them. Don’t worry, though, we’ve got you covered. This 6ft converter plugs into your computer’s USB port and provides you with a DB-9 RSR232 connection. After installing the drivers o...

SKU: DF-FIT0272

The USB 2.0 to RS422/RS485 Cable provides a simple and easy to connect between the USB and RS422/RS485 ports interface. Ideally for PC, thin client or servers to provide instant RS422/RS485 ports expansion via USB ports. USB to RS422/RS485 industrial intelligent converter,no power supply nee...

SKU: DF-FIT0737

This USB to RS485 converter module( USB 1.1，USB 2.0，USB 3.0 compatible) can expand one RS485 asynchronous communication interface from a computer’s USB interface to realize the communication between PC and other RS485 devices.The module uses a PL2303 chip and an easy-to-install driver. There are ...

SKU: DF-FIT0874

RS485 serial ports are often used to enable communication between PC and RS485 devices. This USB to RS485 serial cable with built-in a CH340 bus converter chip allows direct communication between PC and 485 device without extra wire connection. The converter works well with WindowsXP/Vista/7/8/10...

SKU: SF-DEV-11814

The µUSB-PA5 is a compact USB-to-Serial TTL UART bridge based on the FTDI FT232RQ. It connects to your PC via a Mini-B USB connector and provides serial communication at baud rates up to 3 Mbps — designed primarily for programming and communicating with 4D Systems displays and controllers. The 5...

SKU: WS-7965

A USB to TTL serial adapter cable with an embedded PL2303 converter chip. This 1-metre cable provides a simple way to add serial communication to your projects, connecting a standard USB-A port to 3.3V TTL-level UART signals via a 4-pin 2.54mm header. Ideal for accessing serial consoles on singl...

SKU: DF-TEL0010

This USB to TTL converter combine the USB-232-1 (USB to Single RS232 Adapter) and TTL-232-1 (Port-powered RS232/TTL converter) allows you to convert USB to TTL/CMOS compatible levels and vice versa. It can be used to set up APC220 RF wireless module. It can be used as STC microcontroller p...

SKU: SF-CAB-12977

This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its separated pins, this cable is a perfect candidate...

SKU: SF-CAB-17831

This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its separated pins, this cable is a perfect candidate...

SKU: AF-954

The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36" cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB por...

SKU: SS-103990049

USB To Uart 5V/3V3 is a USB to serial adapter,Which is base on CH340,CH340 is a USB bus convert chip and it can realize USB convert to serial interface, USB convert to IrDA infrared or USB convert to printer interface. this module is compatible with 5V and 3v3.and it can used for upload code or...

SKU: SF-COM-00650

The FT232RL is a popular USB-to-UART bridge IC from FTDI, featuring a built-in EEPROM and oscillator for minimal external component requirements. It comes in a 28-pin SSOP package that can be hand-soldered, making it a versatile choice for adding USB serial communication to custom projects. Key ...

SKU: WS-25411

USB To UART/I2C/SPI/JTAG Converter, Supports Multiple Interfaces, Compatible with 3.3V and 5V, Multiple Protection Circuits, Multiple Systems Support, Aluminum Alloy Case, Wall-mount & Rail-mount Support USB TO UART/I2C/SPI/JTAG Supports multiple interfaces | Compatible ...

SKU: WS-21443

A USB-to-UART communication module based on the CH343G chip, offering data rates up to 6 Mbps via a USB-C connector. It supports selectable TTL output levels (3.3 V or 5 V) and works across Windows, macOS, Linux, and Android. The board includes multiple protection circuits — resettable fuse, tra...