All Products
Showing 61-80 of 100 products
40 pin 30CM Jumper wire F/F
A 40-pin ribbon of female-to-female (F/F) jumper wires, 30cm long, in ten rainbow colours. The wires fit standard 0.1″ (2.54mm) pitch headers and can be kept as a ribbon for neat harnesses or separated into individual jumpers. Key Features Female-to-Female (F/F) – 0.1″ female header contacts o...
40-pin 0.5mm pitch FPC Flex Cable with A-B Connections - 25cm long
·
A 25cm flexible flat cable (FFC) with 40 pins at 0.5mm pitch and Type A-B connections (contacts on opposite sides at each end). Designed for use with 40-pin FPC-to-IDC adapter PCBs to extend Raspberry Pi GPIO connections or other 40-pin ribbon cable applications. Pair this cable with compatible ...
Adafruit Perma-Proto HAT for Pi Mini Kit - No EEPROM
·
The Adafruit Perma-Proto HAT for Pi Mini Kit is a full-sized prototyping daughter board for any Raspberry Pi with a 2×20 GPIO header (Pi Zero, A+, B+, Pi 2, 3, 4, 5). It provides a grid of 0.1″ soldering holes connected in a familiar breadboard pattern — making it easy to transfer circuits from a...
Pico HAT Hacker
The Pico HAT Hacker is an ultra-thin breakout board that gives you full access to all 40 GPIO pins on your Raspberry Pi. At just 0.8 mm thick, it solders directly onto the Pi's header pins while leaving enough pin height to fit a HAT or pHAT on top. Both sides of the board feature pin labels — B...
Raspberry Pi GPIO Male Header - 2x20
This 2x20 male header has the same number and spacing of pins as a Raspberry Pi but is best served when used in conjunction with the Pi Zero since they come with a space of unpopulated headers. This through-hole header has 40 0.1"-spaced pins and can just be snapped into place with minimal sol...
SMT GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header
·
A custom-made 2×20 short female header designed for surface-mount (SMT) Raspberry Pi HAT designs. This header provides the slimmest possible profile when you need a low-clearance connection between your HAT and a Raspberry Pi. While it requires SMT soldering skills (more challenging than standar...
GPIO Header for Raspberry Pi HAT - 2x20 Short Female Header
·
A short-profile 2×20 female through-hole header for connecting Raspberry Pi HATs with minimal height above the board. This custom header provides a slimmer fit than standard-height GPIO headers, ideal for compact enclosures and low-profile builds. Compatible with any Raspberry Pi model featuring...
Tall 2x20 Female GPIO Header (PTH, 0.1in)
·
This tall 2x20 female header is designed to extend the reach of boards using the standard 2x20 GPIO pin footprint, including Raspberry Pi, Google Coral and NVIDIA Jetson boards.It can also be soldered onto Pi HATs that do not already have headers fitted. Check that the HAT or board is only popula...
Raspberry Pi Zero W Pan/Tilt Camera Kit
·
Build a movable camera system around a Raspberry Pi Zero W with this kit. It brings together the Zero W, Raspberry Pi Camera Module V2 and SparkFun Pi Servo pHAT to create a pan/tilt camera for IoT projects.Use it for homemade motion-activated security systems, webcam interfaces for streaming, or...
GNSS Flex pHAT with mosaic-G5 P3
·
Add survey-grade GNSS positioning to a Raspberry Pi while keeping size, weight and power demands low. This kit combines the GNSS Flex pHAT with the SparkPNT mosaic-G5 P3 module, built around Septentrio’s compact mosaic-G5 receiver.The pHAT connects to a Raspberry Pi through the standard 40-pin GP...
GPIO Header for RaspberryPi A+/B+/Pi 2/Pi 3 - Tall 2x20 Female Header
This extra-tall 2×20 female header is designed to connect custom PCBs and HATs to the Raspberry Pi GPIO pins. At 16.5 mm tall, it provides enough clearance for your board to sit above the Ethernet and USB jacks without interference. The header has 3 mm pin length on the underside, so there's no ...
Motoron M3H256 Triple Motor Controller for Raspberry Pi (Connectors Soldered)
The Motoron M3H256 Triple Motor Controller makes it easy to control DC motors from a Raspberry Pi (Model B+ or newer) through an I²C interface. Each module can independently control up to three motors, and multiple Motoron boards can be stacked on top of the same Raspberry Pi for projects that ne...
Mini Black HAT Hack3r -Retail Pack - Fully assembled
The Mini Black HAT Hack3r is a compact breakout board that gives you full access to all Raspberry Pi GPIO pins while a HAT or pHAT is attached. Ideal for debugging HAT projects, probing signals, or combining a HAT with other circuits on a breadboard. Every GPIO pin is clearly labelled with its f...
Adafruit GPIO Expander Bonnet - 16 Additional I/O over I2C
·
The Adafruit GPIO Expander Bonnet adds 16 extra digital I/O pins to your Raspberry Pi over I²C. Based on the MCP23017 chip, it plugs directly onto the Pi's 40-pin header and communicates via SDA/SCL, leaving your other GPIO pins free. Each pin can be configured as a digital output (up to 20 mA pe...
Adafruit Assembled Pi T-Cobbler Breakout for Raspberry Pi
·
The Adafruit Pi T-Cobbler breaks out all the power, GPIO, I2C and SPI pins from the Raspberry Pi's 26-pin header onto a solderless breadboard in a T-shaped layout. The wider T-shape makes the pin labels easier to read compared to the compact Cobbler. Comes fully assembled with a 26-pin ribbon cab...
2x20 Socket Riser Header for Raspberry Pi HATs and Bonnets
·
This 2×20 female socket riser header features slightly longer-than-standard pins, adding extra height between your Raspberry Pi and any HAT, Bonnet, or pHAT mounted on top. This additional clearance helps boards clear taller components on the Pi or fit more neatly into cases. The header body is ...
Stacking Header Set for Raspberry Pi Pico
Got a new Raspberry Pi Pico? Great! If you want to hook up components, sensors or any other fun stuff to the GPIO, you're going to need some form of header to use with jumper wires or breadboards. Our Raspberry Pi Pico Female Header Set includes two 20-pin stacking header strips for the main ...
pHAT Stack - Solder Yourself Kit
Stack up to 5 HATs or pHATs on a single Raspberry Pi with the pHAT Stack from Pimoroni. This solder-yourself kit lets you mix and match multiple add-on boards for dashboard setups, multi-sensor projects, or any build that needs more than one HAT at a time. The board includes 6 sets of 2×20 pin h...
Armour Case with Dual Cooling Fan for Raspberry Pi 4
The Armour Case for Raspberry Pi 4 is CNC machined out of Aluminium and acts as a giant heat sink that cools down your Raspberry Pi! The open dual fan design keeps air moving across the Raspberry Pi with little noise and without affecting Wi-Fi and Bluetooth signals! The fans on this case are...
Raspberry Pi PoE+ HAT (Compatible with Raspberry Pi 4B / 3B+)
·
The Raspberry Pi PoE+ HAT adds Power over Ethernet capabilities to your Raspberry Pi 3B+ or 4B, allowing you to power and connect your Pi to the network using a single Ethernet cable. This eliminates the need for a separate power supply and reduces cable clutter in your setup. With support for t...
