All Products
Showing 61-80 of 82 products
1 pin dual-female jumper wire 100mm 50pcs pack
White Nylon Screw and Stand-off Set – M2.5 Thread
40-pin GPIO Ribbon Cable for Raspberry Pi - Grey
26-pin GPIO Cable for Raspberry Pi Model A/B - Grey / 150mm
26-pin GPIO Cable for Raspberry Pi Model A/B - Black / 150mm
Alligator Clip with Female Header (10 Pack)
20-pin 0.1 Female Header - Red - 5 pack
20-pin 0.1 Female Header - Blue - 5 pack
JST SH 4-pin Right Angle Connector (10-pack) - Qwiic Compatible
Acrylic Case Shell Enclosure Computer Box For Microbit with Two AA Battery Holder
ATX Right Angle Connector - PTH 4-pin
Octopus Water level sensor
Raspberry Pi GPIO Expansion Extension Board One Row to Be Three Rows for Pi 4/3/2/1
Black Nylon Screw and Stand-off Set – M3 Thread
100 piece Prototyping Kit
Smart AI Lens kit for Micro:bit
SparkFun Qwiic pHAT Extension for Raspberry Pi 400
1.25mm Pitch 7-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
1.25mm Pitch 8-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
1.25mm Pitch 9-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
1 pin dual-female jumper wire 100mm 50pcs pack
A pack of 50 individual jumper wires, each 100 mm long with female connectors on both ends (female-to-female). These single-pin wires are ideal for making point-to-point connections on breadboards, between header pins, and with development boards. Key Features Connector Type – Female-to-female...
White Nylon Screw and Stand-off Set – M2.5 Thread
A comprehensive 420-piece white nylon screw and standoff set in M2.5 thread — the standard mounting size for most breakout boards, development boards, and single-board computers including Raspberry Pi, Feather, and similar platforms. Comes in a snap-open storage box. Nylon hardware is non-conduc...
40-pin GPIO Ribbon Cable for Raspberry Pi - Grey
A 175mm grey GPIO ribbon cable for Raspberry Pi, with 40-pin female IDC connectors on both ends. Bridges your Pi's GPIO header out to a breakout board, breadboard adapter, or custom PCB. Pin 1 is marked with a white/pink wire for correct orientation. Key Features Female-to-Female – 2×20 IDC so...
26-pin GPIO Cable for Raspberry Pi Model A/B - Grey / 150mm
A 26-pin (2×13) GPIO ribbon cable for connecting the original Raspberry Pi Model A or Model B to breakout boards, breadboards, and other PCBs. Pin 1 is marked with a red wire for easy orientation. Note: This cable is only compatible with the original Raspberry Pi Model A and Model B (26-pin GPI...
26-pin GPIO Cable for Raspberry Pi Model A/B - Black / 150mm
A 26-pin (2×13) GPIO ribbon cable for connecting the original Raspberry Pi Model A or Model B to breakout boards, breadboards, and other PCBs. Pin 1 is marked with a red wire for easy orientation. Note: This cable is only compatible with the original Raspberry Pi Model A and Model B (26-pin GPI...
Alligator Clip with Female Header (10 Pack)
A 10-pack of cables with an alligator clip on one end and a female header on the other. These cables bridge the gap between clip-based prototyping and standard 0.1" pin headers, making it easy to connect alligator clips directly to breadboards, development boards, and breakout modules. Key Featu...
20-pin 0.1 Female Header - Red - 5 pack
A pack of five 20-pin female headers in red, with standard 0.1" (2.54mm) pitch. These are essential for connecting breakout boards, shields, and wires to perfboard and PCB projects. The red plastic housing adds a splash of colour to your builds. Each header can be cut down to smaller sizes with ...
20-pin 0.1 Female Header - Blue - 5 pack
A pack of five 20-pin female headers in blue, with standard 0.1" (2.54mm) pitch. These are essential for connecting breakout boards, shields, and wires to perfboard and PCB projects. The blue plastic housing adds a splash of colour to your builds. Each header can be cut down to smaller sizes wit...
JST SH 4-pin Right Angle Connector (10-pack) - Qwiic Compatible
A 10-pack of JST SH 4-pin right-angle connectors with 1 mm pitch through-hole mounting tabs. These are the standard connectors used with the Qwiic and STEMMA QT ecosystems, making it easy to add I2C connectivity to your own PCB designs. The solid plastic housing accepts standard Qwiic cables, an...
Acrylic Case Shell Enclosure Computer Box For Microbit with Two AA Battery Holder
A crystal-clear acrylic enclosure for the BBC micro:bit with an integrated 2×AA battery holder on the back. The two-piece case wraps the micro:bit while leaving the A and B buttons and edge connector gold fingers fully exposed for easy access. Key Features Material – Crystal acrylic, two-piece...
ATX Right Angle Connector - PTH 4-pin
A 4-pin right-angle ATX connector designed to mate with the standard 4-pin peripheral power connector commonly found on ATX power supplies. Through-hole (PTH) mounting for secure PCB attachment. Specifications Pins – 4 Type – ATX peripheral power connector Orientation – Right angle Mounting...
Octopus Water level sensor
The Octopus Water Level Sensor detects water level using exposed parallel traces on the PCB. As the water level rises, more traces are submerged, producing a higher analogue signal output. Compatible with micro:bit (3 V) and other microcontrollers operating at 3–5.5 V. Part of the ElecFreaks Oct...
Raspberry Pi GPIO Expansion Extension Board One Row to Be Three Rows for Pi 4/3/2/1
A GPIO expansion board that multiplies a single Raspberry Pi 40-pin GPIO header into three parallel rows. This allows you to stack multiple HATs, breakout boards, or jumper wire connections on the same set of GPIO pins simultaneously. Key Features 1-to-3 GPIO Expansion – Three full 40-pin head...
Black Nylon Screw and Stand-off Set – M3 Thread
A comprehensive 420-piece set of black nylon M3 screws, nuts, and hex standoffs in a reusable storage container. Nylon fasteners are non-conductive, making them ideal for mounting PCBs and breakout boards without interfering with antennas or magnetometers. They can also be easily filed down to cu...
100 piece Prototyping Kit
A 100-piece prototyping kit with everything you need to take a breadboard project to a soldered prototype. Includes a selection of PCBs in four sizes, straight and right-angle headers, female headers, screw terminal blocks, and jumper caps — all organised in a plastic storage box. Key Features ...
Smart AI Lens kit for Micro:bit
The Smart AI Lens kit for micro:bit brings machine vision and AI capabilities to your classroom or maker project. Powered by a K210 processor, the AI Lens camera module can recognise faces, track objects and colours, identify pattern cards, and even learn to recognise custom objects with a single...
SparkFun Qwiic pHAT Extension for Raspberry Pi 400
The SparkFun Qwiic pHAT Extension for Raspberry Pi 400 provides access to the Pi 400's GPIO header while adding Qwiic I2C connectivity. The board connects via a 2×20 right-angle header and extends out to the edge of the PCB, allowing you to stack HATs right-side up or connect Qwiic-enabled I2C de...
1.25mm Pitch 7-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
A slim, reliable 1.25 mm pitch cable with 7-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or JST PH connectors are too bulky. This cable uses 1:N reversed wiring, meaning pi...
1.25mm Pitch 8-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
A slim, reliable 1.25 mm pitch cable with 8-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or JST PH connectors are too bulky. This cable uses 1:N reversed wiring, meaning pi...
1.25mm Pitch 9-pin Cable 20cm long 1:N Cable - Molex PicoBlade Compatible
A slim, reliable 1.25 mm pitch cable with 9-pin connectors on both ends and a 20 cm length. The friction-lock connectors provide a secure, satisfying click for lightweight connectivity where standard 0.1" headers or JST PH connectors are too bulky. This cable uses 1:N reversed wiring, meaning pi...
