Monk Makes
Modular RPi 2 Case (Blue)
The ModMyPi Modular Raspberry Pi 2 Case in blue is a fully customisable, two-part ABS plastic enclosure designed for the Raspberry Pi 2 Model B and B+. Its m...
The ModMyPi Modular Raspberry Pi 2 Case in blue is a fully customisable, two-part ABS plastic enclosure designed for the Raspberry Pi 2 Model B and B+. Its modular design lets you add stackable spacer plates, security covers, and VESA mounts to adapt the case to your project's needs — from a simple desktop setup to an embedded industrial application.
The case features a stealth streamlined look with a matt finish body and gloss cap, integrated LED status light pipes, and generous internal space for breakout boards and HATs. Cable slots for GPIO ribbon, CSI camera, and DSI display cables are built in.
Key Features
- Modular Design – Add stackable spacers, SD card covers, USB/HDMI security shrouds, and VESA mounts
- LED Light Pipes – Built-in status LED indicators visible through the case
- HAT Compatible – Internal volume accommodates standard HAT boards
- Cable Slots – GPIO 40-pin ribbon, CSI camera, DSI display, and power switch fly-through
- Clip Fit + Screw Locking – Secure Pi mounting with optional screw lock (included)
- Internal SD Card Holder – Store a spare microSD card inside the case
- VESA Mount Points – 50 mm M3 (4-point) and 40 mm M3 (2-point wall mount)
- Strong ABS Plastic – Durable matt finish body with gloss cap
Specifications
- Compatibility – Raspberry Pi 2 Model B and B+
- Material – ABS plastic
- External Dimensions – 104.95 × 74.95 × 36.00 mm
- Internal Volume – 90.0 × 58.5 × 25.7 mm (from top of Pi PCB to inner lid)
- Colour – Blue (matt body, gloss cap)
Modular Add-Ons (Sold Separately)
- 10 mm Stackable Spacers – Stack up to 5 high for extra internal height
- Micro SD Card Cover – Flush, lockable, tamper-proof protection
- USB & HDMI Security Cover – Dual-use shroud with RJ45 and power breakout hatches
- VESA Mounts – MIS-D 75/100 (M4) and MIS-F 200 mm (M6) options
Ideal For
- Desktop Raspberry Pi setups
- Embedded and industrial applications
- Media centres and digital signage (VESA mount behind TV)
- Projects requiring expandable internal space for breakout boards
Resources
Jargon buster
Plain-language definitions for the technical terms used above.
- breakout
- A breakout is a small circuit board that makes a tiny or hard-to-solder component easier to connect to with standard pins. It matters because this OLED module can be wired into a microcontroller project without needing to solder directly to the display’s fine contacts.
- DSI
- DSI stands for Display Serial Interface, a high-speed connection commonly used to send video data from a computer board to a display. It matters because DSI signals are not simple GPIO wires, so the cable, connector, and signal routing need to match the display interface.
- GPIO
- General-purpose input/output pins are microcontroller pins you can set in software to read signals, switch devices on and off, or connect to peripherals. The number of GPIO pins matters because it limits how many buttons, LEDs, sensors, and other parts you can wire directly to the board.
- HDMI
- HDMI is a common digital video and audio connection used by computers, media players, and many displays. If a display kit has HDMI input, it is usually much easier to test with a single-board computer because it can act like a normal monitor.
- LED
- A light-emitting diode is a small electronic component that lights up when current flows through it in the correct direction. In this kit, LEDs create the flashing effect, so polarity and correct soldering matter for the project to work.
- microSD card
- A microSD card is a small removable memory card used to store files such as audio tracks. For this product, the card is where the sound files live, so its capacity and formatting can affect how many sounds you can use.
- PCB
- A printed circuit board is a rigid board with copper tracks that connect electronic parts without loose wires. For this kit, the PCBs also form the airplane shape, so they are both the circuit base and part of the finished model.
- RJ45
- The common plug and socket style used for wired Ethernet network cables. If a board has an RJ45 connector, you can usually plug it into standard Ethernet cabling without making a custom connector.
Find this product in
Related Tutorials
Free guides on learn.littlebird.com.au
