All Products
Showing 61-80 of 100 products
2.7kΩ SMD Resistor - 1%, 0.1W
·
This surface-mount resistor is a compact 2.7 kOhms part for electronics prototyping, repairs and small production runs.It is rated for 1/10W power dissipation with ±1% tolerance, making it suitable for circuits where a tighter resistance value is useful.Please note that this resistor is sold as a...
4.7k Ohm SMD Resistor - 1/10W, 1%
·
This compact SMD resistor is suited to PCB repairs, prototyping and small-batch builds where you need a precise surface-mount passive component.It is a thick-film resistor with ±1% tolerance and a 1/10W power rating, supplied as a single component.A datasheet is available from the manufacturer fo...
100kΩ 1/10W 1% SMD Resistor
·
This surface-mount resistor provides a resistance of 100 kOhms with ±1% tolerance, suited to compact PCB designs, repairs and small electronics builds.It is a thick film SMD part rated for 0.1W / 1/10W power handling, with an AEC-Q200 rating and a wide operating temperature range.Sold as singles,...
10kΩ Isolated Resistor Array - 8 Element 16 Pin SMD
·
This compact resistor network packages eight individual 10k Ohm isolated resistors into one 16-pin 2506 surface-mount component. It is a handy way to save board space when a design needs several identical resistors close together.Each resistor element is rated for 63mW with a ±5% tolerance, makin...
APA102C-5050 SMD Addressable RGB LED - Cut Tape
·
This APA102C, also known as DotStar, is a 5050-sized SMD addressable RGB LED for adding bright, colourful lighting to custom boards and compact projects.It has an integrated control circuit embedded inside the LED package, with the tiny controller chip and gold bond wires visible if you look clos...
16MHz SMD Crystal Oscillator - 2.0 x 1.6mm, 50ppm
·
This compact crystal oscillator provides a fixed 16MHz clock source in a tiny 2mm x 1.6mm surface-mount package, making it well suited to space-constrained PCB designs.It uses a crystal base resonator with CMOS output and supports a standby power-down function. The oscillator operates across a wi...
DA7280 Haptic Driver SMD
·
The DA7280 is a surface-mount haptic driver IC for linear resonant actuators (LRA) and eccentric rotating mass (ERM) motors. It provides automatic closed-loop LRA resonant frequency tracking to help maintain consistent feel across production tolerances, operating temperature, ageing and mechanica...
IN-PI554FCH 5050 Addressable RGB SMD LED - Cut Tape
·
The IN-PI554FCH is a 5050-size surface-mount RGB LED with an integrated constant-current IC and RGB LED chip, suited to custom PCBs and compact lighting projects.Each LED is supplied as an individual cut-tape unit. It is intended for SMD assembly, so good surface-mount soldering skills and suitab...
12-Pin Female SMD Header - 2.54mm Pitch
·
This female header provides 12 positions on a standard 0.1 inch pitch, making it suitable for compact board-to-board connections and prototyping layouts.It is designed for surface-mount applications where through-hole pins are not practical. The surface-mount legs are staggered to help provide st...
26MHz TCXO Clipped Sine Oscillator 1.65 x 1.25mm SMD
·
This compact TCXO is a temperature-compensated crystal oscillator designed to provide a stable 26.0MHz reference in a tiny surface-mount footprint.It uses a clipped sine wave output and runs from a 1.8V supply, making it suited to space-constrained RF, timing and embedded electronics designs that...
APA-104-1010 Addressable RGB SMD LED Pack of 20
·
The APA-104-1010 is a tiny addressable RGB SMD LED for designs where full-colour control needs to fit into very little board space. Each LED uses a standard one-wire data interface with data in and data out connections.At just 1.0 x 1.0mm square, these microscopic LEDs are suited to dense layouts...
Renesas FS3000-1005 SMD Air Velocity Module
·
This surface-mount air velocity module uses a MEMS thermopile-based sensor to measure airflow in compact electronic assemblies. It is designed for low-profile enclosures where board space and height are limited.The FS3000-1005 provides a digital I2C output and 12-bit resolution, making it suitabl...
SMD Red 7-Segment LED Display - Common Anode
·
This surface-mount 7-segment display is a compact red LED digit for custom PCBs where you want to avoid through-hole parts and keep the board profile low.With a 0.3" (7.62mm) digit height, it remains easy to read while the overall package height is just 0.394" (10mm). The single-character display...
40-Pin 0.5mm FPC Connector - SMD, Dual-Sided Contacts
·
This 40-pin surface-mount FPC (Flat Printed Circuit) connector is a compact board-level connector for flexible flat cables and display tails. Its contacts are arranged so the cable can be inserted with the contacts facing either up or down, giving you more flexibility when laying out or assemblin...
Header - 6-pin Female (SMD, 0.1, Right Angle)
This is a SMD 6 pin right angle female header. We realized that we have had the male version of this header available for awhile now, but never the female. Now you have the ability to get both! Pins have 0.1" spacing between rows and between pins. Documents: Dimensional Drawing
2mm 10pin XBee Socket - SMD
This 2 mm pitch 10-pin SMD socket mates with XBee radio modules from Digi. The surface-mount design is ideal for custom PCBs and production boards where through-hole mounting isn't suitable. You'll need two of these sockets to connect to all 20 pins on an XBee module. Key Features 2 mm Pitch ...
Audio Jack - 3.5mm TRRS (SMD)
A 3.5mm TRRS (tip, ring, ring, sleeve) audio jack in a surface-mount package. Unlike standard stereo TRS connectors, TRRS provides three conductors plus ground, allowing it to carry stereo audio along with an additional channel — commonly used for microphone input on hands-free headsets or video ...
Tactile Button - SMD (12mm)
This is an SMD 12mm square SPST button. What we really like is the large button head and good tactile feel (it ‘clicks’ really well). This button is great for user input or a good reset button on a PCB, heck, we use this guy on our PicoBoard! As this is an SMD component make sure you are well ver...
SparkFun RS232 Shifter - SMD
The smallest and easiest to use serial conversion circuit on the market! This board has one purpose in life - to convert RS232 to TTL and vice versa (TX and RX). This will allow a microcontroller to communicate with a computer. Shifter SMD is powered from the target application and can run at any...
Coin Cell Battery Holder - 20mm (SMD)
Now for all of your coin cell battery surface mount needs, the 20mm SMD Coin Cell Holder. This holder fits our 20mm Lithium Ion coin cell battery and holds the battery in place with friction. The metal housing connects to the positive (+) side of the battery and the PCB pad underneath is connecte...
