All Products
AI Overview
Servo options depend mainly on whether you need position control (typically ~180°/270°/300°) or continuous rotation (360° wheel-style motion), plus the torque you need.
Micro servos (small robots, pan/tilt, light mechanisms)
- Budget ~180°: 9g micro servo (1.6kg) (1.6 kg·cm) $7.07
- More durable gears: 9g Metal Gear Micro Servo (1.8Kg ) (metal gears, 1.8 kg·cm) $10.01
- Ultra-small continuous rotation: 2.5g 360 degree Micro Servo (0.45kg) (360°, 0.45 kg·cm) $14.05
- High-torque micro option: Micro Servo - MG90S High Torque Metal Gear (metal gear, compact) $20.98
Standard/high-torque servos (arms, heavier linkages)
- Standard size ~180°: DSS-P05 Standard Servo (5kg) (~5 kg-class) $19.40
- Heavy duty: DF Metal Geared 15Kg Standard Servo 180° (DSS-M15) (15 kg·cm, 180°) $24.68
- Wider travel: DF Metal Geared 15Kg Standard Servo 270° (DSS-M15S) (15 kg·cm, 270°) $25.66
- “Slip/clutch” protection for mechanisms that can be forced: DFRobot SER0057 6kg 300° Clutch Servo (300°, clutch) $21.48
- MG996R-style metal gear: Metal Gear Servo 180 Degrees (MG996R, ~10 kg class) $15.27
Continuous rotation servos (drive wheels, winches, rotation instead of positioning)
- Micro continuous: Micro Servo 9g - Continuous (360° continuous) $7.95
- Micro continuous (FS90R): Continuous Rotation Micro Servo [FS90R] (360° continuous) $14.63
- Standard-size continuous rotation: Servo - Generic High Torque Continuous Rotation (Standard Size) (high torque, continuous) $41.97
- Continuous rotation + feedback sensing: Feedback 360 Degree - High Speed Continuous Rotation Servo (360° + position feedback) $65.97
Servo driver / control boards (run many servos cleanly)
- PCA9685 16-channel I2C driver (great for Arduino/Pi): Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interface [PCA9685] (16-ch, 12-bit, I2C) $31.47
- Raspberry Pi form-factor: Adafruit 16-Channel PWM / Servo Bonnet for Raspberry Pi (16-ch, PCA9685) $26.83 and Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit $34.14
- Raspberry Pi Pico: Servo Driver Module for Raspberry Pi Pico, 16-ch Outputs, 16-bit Resolution (16-ch, 16-bit) $16.84
- No-program trigger control: SparkFun Servo Trigger $43.09 or SparkFun Servo Trigger - Continuous Rotation $34.37
Pan/tilt brackets & kits (camera/sensor mounts)
- With servos included: Mini Pan-Tilt Kit - Assembled with Micro Servos $40.36
- Bracket only: Unassembled Mini Pan-Tilt Kit (Without Micro Servos) $9.65 or FPV Nylon Pan Tilt Kit (Without Servo) $5.85
- Raspberry Pi pan/tilt control: Pan-Tilt HAT - Full kit $66.90 or Pan-Tilt HAT - without Pan-Tilt module $29.84
Useful accessories (mounting, horns, extensions)
- Horns: Micro Servo Arm and Horn Set $2.43, Standard Servo Arm and Horn Set - 25 Spline $4.87, Metal Servo Horn $5.36, Plastic Servo Horn $3.24
- Brackets: Aluminum Multi-Purpose Servo Bracket $9.31, Mounting Bracket for Standard-Size Servos $6.73, Metal Servo Bracket $3.55
- Extensions/Y-cables: Servo extension cable 150mm $0.92, Servo extension cable 300mm $1.09, Servo extension cable 600mm (23.62) $1.58, Servo Y extension cable (300mm) $1.66
Collections
Showing 41-60 of 100 products
Smart Arduino Digital Servo Shield for Dynamixel AX
Some day,a guy want to make a robotic dog as a gift to his little son.He brought some digital servos, a microcontroller,Lipo batterys...Then he found it hard to drive these smart servos with Arduino processor! So we developed a driver board that can easily & quickly drive the digital servo...
Servo - Generic High Torque (Standard Size)
A reliable, high-torque standard-size servo (FS5106B) with dual ball bearings and nylon gears. Delivering up to 83.47 oz-in of torque at 6V with a speed of 0.16 sec/60°, it's a versatile choice for robotics, RC, and mechatronics projects. Features a standard 3-pin power and control cable with 18...
Arduino Compatible Motor Servo Controller Module
This versatile motor and servo controller shield for Arduino drives up to 4 bidirectional DC motors or 2 stepper motors, plus 2 servos — all from a single board. The 4 onboard H-bridges provide 0.6A per channel (1.2A peak) with thermal protection, and the dedicated servo ports use the Arduino's h...
DC Motor in Micro Servo Body
This tiny DC Motor in Micro Servo Body is an interesting motor - it's the same size and shape as our micro servo but it isn't a servo. It's more like a DC motor + plastic gear-train in a box. It's not a super powerful motor, it would do well as a little robot wheel. It's also a lot less e...
8-Channel PWM or Servo FeatherWing Add-on For All Feather Boards
The 8-Channel PWM or Servo FeatherWing adds 8 channels of 12-bit PWM output to any Adafruit Feather board via I2C. It uses an onboard PWM driver with a built-in clock, so it runs independently without tying up your microcontroller — unlike the TLC5940 family, no continuous signal is needed. The ...
Servo extension cable 150mm
A 150mm servo extension cable for reaching servos mounted further from the controller than the servo's built-in lead allows. Male connector plugs into the controller, female connector mates with the servo. Also works as a standard 0.1" jumper cable for general prototyping. Specifications Lengt...
Servo extension cable 600mm (23.62)
This is a 600mm (23.62") servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Male connector on one end goes to controller, female connector mates with servo. Fits all Hitec, Futaba, JR, Multiplex, and Airtronics...
Wheel for Micro Continuous Rotation FS90R Servo
We're keepin' it wheel with this one! Need a great drive solution for your little robotic friends? This black plastic Micro Continuos Rotation Servo Wheel is equipped with a silicone tire and a press-fit design to make connecting to your F...
Metal Servo Horn
This is a high quality metal servo horn. It fits Hitec standard servos, DF series servos and the Uptech CDS 5500 Servo. SPECIFICATIONS Outside diameter: 20mm(0.79") Center hole diameter: 3mm(0.12") Mounting holes: M3 Weight: 2g DOCUMENTS Dimensions ...
Servo - Generic High Torque Continuous Rotation (Standard Size)
Here, for all your mechatronic needs, is a simple, high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-pin power and control cable is attached and all hardware listed below is included...
![Continuous Rotation Servo [FeeTech FS5103R]](/rails/active_storage/representations/redirect/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVGkCHHtJIghwdXIGOwBUSSIMYmxvYl9pZAY7AEY=--6004bac0c43ea2c89747a25ee0dbbc83294146c4/BAh7BkkiC19yYWlscwY6BkVUewdJIglkYXRhBjsAVHsHOgtmb3JtYXRJIghqcGcGOwBUOhJyZXNpemVfdG9fZml0WwdpApABaQKQAUkiCHB1cgY7AFRJIg52YXJpYXRpb24GOwBG--4cc5678865497cdbcf7b02aee5242eda5f847322/image_3493915f-aadf-4f6a-9981-a3886531e9ed.jpg)
Continuous Rotation Servo [FeeTech FS5103R]
This servo rotates fully forward or backwards instead of moving to a position. You can use any servo code, hardware or library to control these servos. Good for making simple moving robots. Comes with four different horns, as shown.To control with an Arduino, we suggest connecting the contro...
Micro Servo - High Powered, High Torque Metal Gear
This high-powered micro servo packs nearly double the stall torque of standard micro servos into a compact metal-geared package. With approximately 180° of rotation, it works with any standard servo library, driver, or controller — including the Arduino Servo library, motor shields, and 16-channe...
Adafruit 16-Channel PWM / Servo HAT for Raspberry Pi - Mini Kit
The Adafruit 16-Channel PWM/Servo HAT adds precision servo and PWM control to your Raspberry Pi. Using the PCA9685 I2C PWM controller, it drives up to 16 servos or PWM outputs simultaneously with 12-bit resolution — completely free-running with no Pi processing overhead. Up to 62 HATs can be sta...
Sub-micro Servo - SG51R
This is just about the cutest, tiniest little micro servo we could find, even smaller than the 9 gram micro servos we love so much. It can rotate approximately 180 degrees (90 in each direction) and works just like the standard kind you're used to but much smaller. You can use an...
Arduino Compatible 9G Micro Servo Motor
A compact 9g micro servo motor ideal for small robotics, pan-and-tilt mechanisms, and Arduino projects. With 1.6 kg·cm of torque and a fast 500°/sec speed, it's well-suited for lightweight applications where space is limited. The servo connects directly to an Arduino digital pin and is controlle...
Analog Feedback Micro Servo - Plastic Gear
A plastic-geared micro servo with an extra trick — a fourth wire brings out the internal potentiometer feedback signal, letting you read the servo's actual position via an analog input. This feedback capability enables motion recording, playback, and improved stability in robotics applications. ...
Analog Feedback Micro Servo - Metal Gear
A metal-geared micro servo with an extra trick — a fourth wire brings out the internal potentiometer feedback signal, letting you read the servo's actual position via an analog input. This feedback capability enables motion recording, playback, and improved stability in robotics applications. Th...
Kitronik 16 Servo Driver Board for the BBC micro:bit
Take your robotics project to the next level with the (i2C) Kitronik 16 Servo Driver Board for the BBC micro:bit.Capable of controlling 16 servos which are powered directly from the board's power supply. The board can be powered either through the terminal blocks or the on-board header for radio ...
Servo Tester and Speed Controler Power
The servo tester and controller can be used as a signal generator for electronic speed controllers. If you are looking for a low-cost way to get a servo up and running without any programming, you can plug directly into the servo tester. There are 3 modes that can be use:...
Micro Gripper Kit with Position Feedback Servo
This small gripper uses a rack and pinion design with a servo-driven pinion and opposing racks to keep the gripper paddles synchronized and parallel to each other throughout its 32 mm range of motion. It includes a special micro servo with an additional wire that gives access to its feedbac...
