All Products

SKU: SF-PGM-31107 · MPN: PGM-31107

The SEGGER J-Link EDU Mini is a compact JTAG/SWD debug probe for students and hobbyists working with Arm® and RISC-V-based microcontrollers. It delivers core J-Link debugging and flash programming functions in a small, minimal form factor.Use it to halt program execution, read or write memory add...

SKU: SF-CAB-17854 · MPN: CAB-17854

Securely link compatible modules with this short adapter cable, fitted with a 4-pin locking JST-GHR connector on one end and a 6-pin locking JST-GHR connector on the other.Both connectors use a 1.25 mm pitch and are suited to hardware that may see movement or vibration, such as sensors and teleme...

SKU: SF-PRT-27115 · MPN: PRT-27115

Keep your high-precision GNSS receiver protected when you are working out in the field. This ruggedised carrying case is designed for RTK Facet and RTK Facet v2 receivers, helping shield your gear from the knocks and rough handling that can come with outdoor surveying and positioning work.Inside ...

SKU: SF-PRT-18734 · MPN: PRT-18734

This pre-wired DC supply provides a 13.8V DC output with a constant 8A current, making it useful for LED lighting-type loads and other suitable DC power applications.It accepts an 8-36V DC input through the red and black input leads, and provides output through the yellow and black leads. The uni...

SKU: SF-PRT-18722 · MPN: PRT-18722

This constant current DC power supply provides a fixed 12.6V DC output with a constant 10A current output. It is a straightforward option for projects that need a rugged, enclosed supply for compatible loads such as LED lighting-type devices.The unit is built into a robust metal enclosure with an...

SKU: DF-FIT0728 · MPN: FIT0728

This PG7L waterproof cable gland provides a neat sealing solution for routing cables into outdoor or moisture-sensitive electronics enclosures. It helps close off the entry point created when drilling into project boxes, reducing the chance of rain, splash water, condensation or dust reaching you...

SKU: DF-FIT0924 · MPN: FIT0924

This compact PH2.0-4P cable is a short female-to-female lead for linking modular electronics hardware without messy excess wiring. It is designed for tidy connections between sensors, actuators and controller boards in close-spaced builds.Each end has a keyed PH2.0-4P female connector to help pre...

SKU: DF-FIT0584 · MPN: FIT0584

This flexible silicone-insulated wire pair is made for high-current power wiring in demanding electronics, robotics and motion-control projects. It uses fine tin-plated copper strands for good conductivity and oxidation resistance, with a twisted multi-strand structure that helps reduce signal in...

SKU: DF-FIT0691 · MPN: FIT0691

This 20cm 18-pin FPC flat flex ribbon cable is made for connecting compatible display modules and controller boards that use the GDI interface. Its reverse 18-pin layout and 0.5mm pitch suit compact display projects where tidy, low-profile internal wiring is needed.The flexible polyimide-based ri...

SKU: SF-SEN-29529 · MPN: SEN-29529

This ultra-small Qwiic-enabled breakout adds three-axis acceleration sensing to compact projects using the LIS3DH, a smart, low-power capacitive micro-machined accelerometer with 12-bit resolution. It can be used for translation detection and is classified as a 3DoF, or 3 Degrees of Freedom, sens...

SKU: AF-6505 · MPN: ADA6505

Keep your Adafruit Terminal Block BFF board protected during use and transport with this neat, minimal snap-together case.The enclosure is custom-designed and 3D printed to fit the Terminal Block BFF Add-On and its peripherals. No screws or glue are needed — snap the board into the bottom piece, ...

SKU: AF-6358 · MPN: ADA6358

Build large, colourful HUB75 RGB LED matrix displays from a Raspberry Pi without the usual jumper-wire tangle. This Adafruit Bonnet plugs onto the 40-pin GPIO header and drives three parallel matrix strings using the active3 pinout, so it can handle roughly three times as many panels or pixels as...

SKU: AF-6305 · MPN: ADA6305

Keep your Adafruit Feather RP2350 with HSTX Port protected during use and transport with this cute, minimal enclosure. It has been custom-designed to fit the Feather RP2350 HSTX board, including the version with 8MB of PSRAM.The case is 3D printed from translucent milky white plastic using an SLA...

SKU: AF-6301 · MPN: ADA6301

This cute, minimal enclosure is designed to help keep your compatible Adafruit Sparkle Motion board safe during use and transport. It has been custom-designed and 3D printed to accommodate the board’s peripherals.No screws or glue are needed: snap the board into the bottom piece, then assemble th...

SKU: AF-6013 · MPN: ADA6013

Keep your Pixel Trinkey protected in use and during transport with this cute, minimal clear enclosure. It has been custom-designed and 3D printed to fit the Pixel Trinkey neatly.The case accommodates the reset button, 3-pin JST SH port, and the 4 terminal block outputs, so the important connectio...

SKU: AF-6402 · MPN: ADA6402

Keep your Adafruit TPS61169 Constant Current Boost Converter for LEDs protected during use and transport with this compact snap-on enclosure. It has been custom-designed and 3D printed to fit the breakout and its surrounding parts.No screws or glue are needed: snap the board into the bottom piece...

SKU: AF-6409 · MPN: ADA6409

Keep your Adafruit USB Type-C CC Resistor Fixer protected during use and transport with this cute, minimal snap-on enclosure. It has been custom-designed and 3D printed to suit the board and its peripherals.No screws or glue are needed: snap the board into the bottom piece, then assemble the top ...

SKU: DF-FIT0916-F · MPN: FIT0916-F

These labelled jumper cables are designed to make Gravity project wiring easier to follow, especially when a build has several similar connections. Each cable carries I2C/UART pin labels so you can identify power, ground, clock/receive and data/transmit lines without relying only on wire colour o...

SKU: DF-FIT0916-MM · MPN: FIT0916-MM

This 5 pack of labelled 4-pin male-to-male DuPont cables is designed to make wiring Gravity modules, breadboards and development boards clearer during prototyping. Each 30 cm cable includes printed I2C and UART pin tags on the wires, helping you identify power, ground and signal lines without rel...

SKU: DF-FIT0898 · MPN: FIT0898

This pack gives you 10 handy 30cm Gravity sensor cables for connecting 4-pin PH2.0 modules to breadboards, IO boards or standard DuPont-style headers.Each cable has a 4-pin PH2.0 plug connector on one end and DuPont male connectors on the other, making it useful for I2C or UART wiring in maker pr...