All Products

SKU: DF-FIT1038 · MPN: FIT1038

The M0601 is a compact direct-drive hub motor for intelligent mobile robots, AGVs and AMRs. It combines a brushless DC motor, servo driver and high-precision encoder in a single 102mm hub, reducing the need for external motor drivers and complex wiring.Motion control is handled with advanced FOC ...

SKU: DF-FIT1042 · MPN: FIT1042

The M0601 is a compact direct-drive hub motor for intelligent robots, AGVs, AMRs and other mobile platforms. It combines a brushless DC motor, servo driver and high-precision encoder into a 102mm diameter unit, reducing the need for external drivers and complex wiring.Motion control is handled wi...

SKU: LB-PHS

Explore electronics with a kit containing 38 different parts and 45 units in total. It brings together a Little Bird Uno R3, ESP32 development boards, a breadboard, jumper wires and components for building and testing circuits.The selection includes switches, LEDs, sensors, motors, motor drivers ...

SKU: DF-MBT0012

The micro:IoT is a feature-packed IoT expansion board for the BBC micro:bit. It integrates Wi-Fi connectivity, an OLED display, motor drivers, servo outputs, and a range of I/O ports into a compact cloud-shaped PCB — everything needed to build IoT projects with minimal setup. Designed to work wi...

SKU: SB-21468

Pico Driver Motor HAT is a DC motor control module that is powered by one H-bridge IC L293D with the motor input supply range 6 V-12 V. It is designed to connect 2 DC motors simultaneously or 1 stepper motor that would help the user to make projects in a compact size with high efficiency. You ca...

SKU: AF-4225 · MPN: 4225

Everything you need (besides the Jetson Nano) to build NVIDIA's JetBot — an open-source AI robot platform. This parts pack includes the motor driver, motors, wheels, and a handy PiOLED display to get your JetBot rolling. The included DC Motor + Stepper FeatherWing provides I2C control for two br...

SKU: DF-SER0060

A high-torque digital servo with all-metal gears, an aluminium shell, and IP67 waterproof rating. Delivers up to 35 kg·cm of stall torque at 7V, making it suitable for demanding robotics applications, multi-joint mechanisms, and outdoor projects where water exposure is a concern. The MOS-driven ...

SKU: DF-DRI0001

The DFRobot 2×1A DC Motor Shield uses the L293 motor driver chip to control two 7–12 V DC motors at up to 1 A per channel. It stacks directly onto Arduino Uno and Arduino Mega boards, using pins 4, 5, 6, and 7 for motor control with PWM speed support. Key Features Dual Motor Drive – Control tw...

SKU: DF-FIT0441

INTRODUCTION   This is a motor revolution: a new DC brushless motor with built-in motor driver. It can be conncected to Arduino directly without external motor driver. Whatsmore, the motor comes with directional control, PWM speed control and speed feedback output, which make this motor t...

SKU: AF-2939 · MPN: 2939

A compact 2WD robot rover chassis kit that provides the mechanical foundation for your next robotics project. The kit includes an anodised aluminium chassis, two DC motors in a micro servo form factor, wheels, and a swivel caster — everything you need for the body of a mobile robot. Pair it with...

SKU: AF-5466 · MPN: 5466

A 10KΩ linear slide potentiometer with a built-in geared DC motor underneath the slider. The motor can move the wiper up and down programmatically, while the slider also moves freely by hand when the motor is unpowered. This combination allows both manual and digital control — commonly seen in pr...

SKU: KS-KS4033

The micro:bit DRV8833 Motor Driver Expansion Board adds dual DC motor control to the BBC micro:bit. Built around the DRV8833CPWP motor driver IC, it can output up to 700 mA per channel with four control modes: clockwise rotation, anticlockwise rotation, brake, and stop. The board includes on-boa...

SKU: PH-103393

A Raspberry Pi motor controller HAT built around the L293D dual H-bridge driver IC, designed to make building a Raspberry Pi robot easy and fun. Control up to 4 DC motors or 2 stepper motors at up to 600 mA (1 A peak) per channel. The board includes breakout connectors for IR line sensors and an...

SKU: SF-COM-00315

The SN754410 is a quad half H-bridge motor driver IC capable of driving DC motors, stepper motors, and other inductive loads. It accepts TTL 5V logic inputs and can drive motors from 4.5V to 36V at up to 1A continuous output current per channel. A pin-compatible replacement for the popular L293D...

SKU: AF-2448 · MPN: 2448

The Adafruit TB6612 Breakout is a compact dual H-bridge motor driver that can spin two DC motors bidirectionally, step one bipolar or unipolar stepper, or fire two solenoids — all at up to 1.2A continuous per channel (3A peak). It's the same driver chip used in the Adafruit Motor Shield and Motor...

SKU: DF-DRI0002

A dual H-bridge DC motor controller based on the L298N driver chip, capable of driving two bi-directional DC motors at up to 2 A per channel. The module accepts a wide motor supply voltage of 4.8–46V and includes high-speed protection diodes and an enlarged heatsink for improved thermal performan...

SKU: AF-3244 · MPN: 3244

A compact three-layer round robot chassis kit with two DC drive motors, matching wheels, and a caster ball for balance. The high-strength anodised aluminium alloy frame provides a sturdy platform for building your own 2WD mobile robot, with three layers of mounting space for batteries, controller...

SKU: SF-ROB-14450

The TB6612FNG Motor Driver can control up to two DC motors at a constant current of 1.2A (3.2A peak). Two input signals (IN1 and IN2) can be used to control the motor in one of four function modes: CW, CCW, short-brake and stop. The two motor outputs (A and B) can be separately controlled, and t...

SKU: PL-2753

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, Pi A+, Pi 2, or Pi 3 and provides an easy and low-cost solution for driving a pair of small brushed DC motors. Its integrated DRV8835 dual motor driver allows it to operate from 1.5 V to 11 ...

SKU: DF-DRI0050

This is a PWM driver board with four adjustment methods, namely, Python code direct control, PC host computer control, UART communication programming control, and potentiometer manual control. It is used in application scenarios such as DC motor speed control and light adjustment. This produ...