All Products

SKU: SF-SEN-15570

The HM01B0 from Himax Imaging is an ultra low power CMOS Image Sensor that enables the integration of an “Always On” camera for computer vision applications such as gestures, intelligent ambient light and proximity sensing, tracking and object identification. The sensor allows the sensor to co...

SKU: LB-FIL-0119

We've finally found the best HIPS filament in Australia! This is a 1Kg reel of dissolve-able 1.75mm colourless (no pigment) HIPS (High Impact Polystyrene) filament.Makers frequently use HIPS as support material because it is easily removed with Limonene solution (the main component in the oi...

SKU: LB-FIL-0120

We've finally found the best white HIPS filament in Australia! This is a 1Kg reel of dissolve-able 1.75mm white HIPS (High Impact Polystyrene) filament. Makers frequently use HIPS as support material because it is easily removed with Limonene solution (the main component in the oil of cit...

SKU: SF-SEN-30183 · MPN: SEN-30183

This compact digital compass module is built around the HMC6343, a fully integrated electronic compass designed to deliver reliable heading data without making your main microcontroller do all the processing.Unlike basic magnetometers that need to be kept flat, the HMC6343 combines 3-axis magneto...

SKU: SF-ROB-21245

A compact hobby gearmotor from DAGU with a 48:1 gearbox ratio and 140 RPM unloaded speed. Features a 9mm output shaft on a straight axis with male connectors for easy wiring. A reliable, affordable option for small robotics and wheeled projects. Runs on 4.5VDC with a no-load current of 190mA — w...

SKU: SF-ROB-13302

These are a pair of hobby gearmotors from DAGU. These gearmotors are the same ones recommended for use in the Shadow Chassis and offer a cheap and easy-to-use setup to get your wheels turning. Each Hobby Gearmotor also possess a 9mm long output on a straight axis.These gearmotors require a voltag...

SKU: SF-ROB-13258

These are a pair of right angle, hobby gearmotors from DAGU. These gearmotors are the same ones utilized in the Magician Chassis and RedBot Kit and offer a cheap and easy to use setup to get your wheels turning. Due to these gear motors being at a right angle, you will also be able to track and c...

SKU: SF-TOL-09200

It’s like an Xacto knife, only better. We use these extensively when working with PCBs. These small knives work well for cutting traces, scraping ground pours, and guiding hair-like wires into their proper place. Excel knife comes with aluminum handle, one ultra-sharp blade, and safety cap.

SKU: LB-LS0845

You can never find a knife when you need one!    We use these when working with PCBs , cardboard and paper craft.These small knives work well for cutting traces, scraping ground pours, and guiding hair-like wires into their proper place. Excel knife comes with aluminum handle, three ult...

SKU: SF-ROB-11696

This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things like making a fan or spinning something pretty fast without much resistance. The motor has a normal operating voltage range of 1.0 to 3.0VDC but can...

SKU: SF-ROB-16413

The DG01D-E is a single hobby motor with a hall speed encoder. This motor requires a voltage between 3-9V, has a gearbox ratio of 1:48 and a speed of 90RPM at 4.5V. The voltage between positive and negative is determined according to the power supply voltage of the single chip microcomputer us...

SKU: SF-ROB-24053 · MPN: ROB-24053

These DG01D-E hobby motors come as a matched pair, each with a built-in hall effect speed encoder and a 1:48 plastic gearbox. The hall sensor detects the magnetic plate's polarity — south pole outputs high, north pole outputs low — giving you precise speed and position feedback for closed-loop mo...

SKU: SF-ROB-31141 · MPN: ROB-31141

Add motion and feedback to small robotics builds with this single DC gearmotor and integrated Hall effect speed encoder. Instead of simply driving a motor open-loop, your microcontroller can count encoder pulses to track wheel rotation and speed for more accurate navigation and speed control.The ...

SKU: SF-CEL-17117

The Hologram eUICC SIM Card is a mix between legacy and new technology for cellular service for your project. Hologram’s eUICC SIMs enable profile switching capabilities so you can work with Hologram to dynamically change the subscriber profile of the SIM while the devices are in the field over-t...

SKU: AF-5349

Protect your RFID-enabled cards from unauthorised scanning with these holographic RFID blocking card sleeves. Each sleeve shields the radio frequency identification (RFID) chip in your credit cards, bank cards, and photo IDs from being read by uninvited RFID readers — far more effective than wrap...

SKU: SF-WRL-19032 · MPN: WRL-19032

This Holybro SiK Telemetry Radio kit is a compact, lightweight open-source radio link for sending serial data over more than 300m out of the box. It is designed as a simple cable replacement for telemetry, RTK correction data (RTCM), MAVLink traffic, or basic serial output such as Serial.print() ...

SKU: DF-TEL0189 · MPN: TEL0189

The Home Assistant Connect ZBT-1 is a USB adapter that adds Zigbee and Thread connectivity to your Home Assistant setup. Powered by the Silicon Labs EFR32MG21 chipset, it enables seamless control of Zigbee and Thread smart home devices with support for the Matter standard. Plug-and-play with Hom...

SKU: DF-DFR1189 · MPN: DFR1189

Introduction Home Assistant Green is a powerful and privacy-focused smart home hub designed to unify and automate all your smart devices. It seamlessly integrates with Apple HomeKit, Google Home, Samsung SmartThings, and Amazon Alexa, making it a versatile choice for any smart home ecosystem. Wit...

SKU: EC-DTE00413H

Another development board for ESP8266-12F. But this one is a bit different, made to be easy to set up without the need for additional hardware like programmers and voltage regulators. A wide voltage range switching regulator enables the user to use different battery technologies from 1 AA cell up...

SKU: DF-FIT0736

These hook test clips provide a quick, solder-free way to connect to breakout boards, IC pins, and circuit test points. The set includes 10 wires in 5 colours for easy circuit identification, with silicone-insulated leads for flexibility and durability. Ideal for low-current testing, prototyping...