All Products
Showing 781-800 of 8855 products · 2586 unavailable products hidden
50-pin 0.5mm FFC / FPC Extender
·
This 50-pin FFC/FPC extender lets you connect two 50-pin 0.5mm pitch flat cables end-to-end to extend their total length. Simply plug a cable into each side of the board and you have a longer cable run — useful when the stock cable isn't quite long enough to reach. The extender has two flip-lock...
50-pin 0.5mm Pitch FPC Flex Cable - 250mm / 10 long
·
This 50-pin FPC (Flexible Printed Circuit) cable is ultra-thin and flexible, ideal for tight spaces where a round cable would be too bulky. At 250mm (10″) long with 0.5mm pitch contacts, it's a common format used in displays, camera modules, and breakout boards. Key Features 50 Pins – Supports...
50-pin 0.5mm pitch top-contact FPC SMT Connector
·
This 50-pin top-contact FPC connector is a surface-mount component for connecting 0.5mm pitch FPC/FFC cables to your custom PCB. It's compatible with many 50-pin displays including 2.8″ TFT panels with resistive touchscreens. This is a fine-pitch SMT component — soldering requires experience wit...
50-pin FPC Extension Board + 200mm Cable
·
This 50-pin FPC extension board lets you add approximately 22cm of reach to any 50-pin, 0.5mm pitch FPC/FFC connection. The board features two 50-pin flex connectors with a 200mm (20cm) FPC cable included, giving a total extension of about 22cm when the board length is included. Works with 50-pi...
51kΩ ±5% 0.1W 0603 SMD Resistor
·
This is a general-purpose surface-mount 51 kΩ resistor for everyday PCB builds, repairs and prototyping. With a standard ±5% tolerance and 1/10W power rating, it is suited to a wide range of non-critical electronics applications.The compact SMD package is useful for modern high-density board layo...
5:1 Micro Metal Gearmotor LP 6V
A Pololu micro metal gearmotor with a 5:1 gear ratio and low-power (LP) 6V motor. The LP motor variant uses precious metal brushes and draws the least current of the micro metal gearmotor family, making it well-suited for battery-powered projects where efficiency matters more than peak torque. A...
520PCS 2.54mm Jumper Pin Housing Header Crimp Connector Kit
This 520-piece connector kit contains everything you need to make custom 2.54mm (0.1″) Dupont-style jumper wires and harnesses. It includes a comprehensive selection of single-row and dual-row housings from 1-pin to 2×8-pin, along with male and female crimp pins, pin headers, and a 10-wire rainbo...
5.25mm Square SMD Momentary Tactile Pushbutton Switch
·
This compact tactile pushbutton is a high-reliability surface-mount switch for tight user interfaces. Its 5.25mm square outline and 1.5mm low-profile actuator height make it suitable for small enclosures such as remote controls, handheld instruments and wearable devices.The switch uses a standard...
5.5 1920x1080 mini-HDMI OLED Display with Capacitive Touchscreen
A 5.5-inch OLED display with 1920×1080 Full HD resolution and a capacitive multi-touch overlay. The display connects via mini-HDMI for video and USB for touch input, with driver-free plug-and-play touch support on Windows, Linux, and macOS. The USB-powered design eliminates the need for a separa...
5.5 / 2.1mm Barrel Connector - DC Power Plug
·
A 5.5×2.1mm DC barrel connector plug for adding a standard power connector to the end of your own wires. The outer shell unscrews to reveal solder terminals and a crimp strain relief, making it easy to wire up custom power cables. This is the most common barrel jack size used with Arduino boards...
5.5/2.1mm DC to Micro USB Adapter
A DC 5.5×2.1mm female to Micro-USB male power adapter plug, allowing you to power Micro-USB devices from a DC barrel jack power supply. Useful for powering Raspberry Pi, LattePanda, phones, and tablets from existing DC supplies. Specifications Input (Female) – DC 5.5×2.1 mm barrel jack Output...
5.5/2.1mm DC to Type-C Adapter
A DC 5.5×2.1mm female to USB Type-C male power adapter plug, allowing you to power USB-C devices from a DC barrel jack power supply. Useful for powering Raspberry Pi 4/5, LattePanda, and other USB-C-powered boards from existing DC supplies. Also available in a Micro-USB version. Specifications ...
555 Timer
The classic 555 timer/oscillator IC from Texas Instruments — one of the most versatile and widely used integrated circuits in electronics. With just a few external resistors and capacitors, it can generate timing delays from microseconds to hours, produce square wave oscillations, and drive LEDs,...
5.5mm/2.1mm DC Barrel Polarity Reversing Cable
·
A 5.5×2.1mm DC barrel polarity reversing cable that swaps centre-negative to centre-positive (or vice versa). Simply plug it inline between your DC power supply and device to reverse the polarity — no rewiring required. This is useful for powering devices that use centre-negative barrel jacks (s...
55 Plastic Gear Pack
This 55-piece plastic gear pack contains an assortment of gears in various sizes and tooth counts for building custom drive trains, mechanical linkages, and DIY motorised projects. Pair them with a small DC motor to create gear reduction systems, conveyor mechanisms, or simple robotic drives. Ke...
560kΩ 0603 SMD Resistor 1/10W ±5%
·
This general-purpose surface-mount resistor provides a 560k Ohm value in a compact standard 0603 package, making it suitable for dense PCB layouts and everyday electronics work.It uses a thick film composition and is rated at 1/10W (0.1W) with ±5% tolerance. The part is AEC-Q200 qualified, suppor...
5” 800×480 IPS Touchscreen with Optical Bonding (Compatible with Raspberry Pi 5 / 4B / 3B+ / 3B)
·
A 5-inch IPS capacitive touchscreen display with 800×480 resolution, designed for direct connection to Raspberry Pi via the DSI interface. Features optical bonding (full lamination), anti-fingerprint and anti-glare surface treatment, and a high brightness of 550 cd/m² — performing well even in ou...
5'' 800x480 TFT Raspberry Pi DSI Touchscreen(Compatible with Raspberry Pi 3B/3B+)
A 5-inch TFT capacitive touchscreen display with 800×480 resolution, designed for direct connection to Raspberry Pi 3B and 3B+ via the DSI interface. The display is powered directly from the Pi — no external power supply required. A potentiometer on the back allows hardware backlight adjustment. ...
5G Omni-Directional High Gain Antenna with SMA to IPEX-4 Connector
·
This 5G omni-directional antenna provides 18dBi gain across a wide 600–6000MHz frequency range, covering 5G, 4G, 3G, and GNSS bands. The omni-directional radiation pattern delivers consistent signal quality in all directions without needing to orient the antenna toward a specific tower. It conne...
5 Inch Display for Raspberry Pi
This 5-inch HDMI-compatible display features an 800×480 TFT-LCD panel with 5-point capacitive touch, making it a versatile monitor for Raspberry Pi projects, mini PCs, and single-board computers. Touch input works over USB with no driver installation required — just plug and play. The display in...
