DFRobot
Micro Metal Geared Stepper Motor (12V 0.6kg.cm)
INTRODUCTION This is a miniature stepper motor with 100:1 metal reduction gear box for enhanced torque. It has a voltage input range of 5 - 12V DC. This...
Get notified when back in stock
INTRODUCTION
This is a miniature stepper motor with 100:1 metal reduction gear box for enhanced torque. It has a voltage input range of 5 - 12V DC. This product is suitable for the 3D printers and applications which require precise rotation control. Note: Please limit the motor current, or overlarge current will burn the motor.
SPECIFICATION
- Stepper Motor:
- Coil resistance: 30Ω±10%
- NO. Of Phases: 2 PHASES
- Step Angle: 18° / Step
- MAX.Starting Frequency: 900PPS min
- MAX.Slewing Frequency: 1200 PPS min
- Pull IN Torque: 6gf-cm min
- Lead Out Torque: 10gf-cm max
- Stepper Motor with Gear Box:
- Step Angle: 18/100° / Step
- MAX.Starting Frequency: 900PPS min
- MAX.Slewing Frequency: 1200 PPS min
- Pull IN Torque: 0.5Kgf-cm min
- Lead Out Torque: 0.8Kgf-cm max
- Cable Length: 15cm
- Weight: 14g
DOCUMENTS
SHIPPING LIST
- Micro Metal Geared Stepper Motor (12V 0.6kg.cm) x1
Find this product in
Robotics & Motion
Micro Metal Geared Stepper Motor Specifications
Datasheet · 271.5 KB · Click any page to view full size
Supplier page — dfrobot.com
Supplier Description · 468.3 KB · Click any page to view full size
Related Tutorials
Free step-by-step guides
You might also like
Customers who bought this also bought
MG996 Servo 180° Metal Gear
$8.80
Black Gladiator-Tracked Chassis
$48.15
Geared Stepper Motor 5V w/ Driver
$6.55
TIP122 NPN Transistor
$2.60
Snap-Action Switch with 16.7mm Lever: 3-Pin, SPDT, 5A
$2.25
Solenoid - 5v (small)
$13.45
Small push-pull solenoid
$16.55
Mini Panel Mount SPDT Toggle Switch
$2.15
Jargon buster
Plain-language definitions for the technical terms in the product description.
- DC
- DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.
- Torque
- A twisting force that causes something to rotate, usually measured in newton-metres or kilogram-centimetres. It matters when choosing motors, servos, gears, and tools because higher torque is needed to lift heavier loads, turn larger wheels, or move mechanisms without stalling.