ELastoLite INV133 Inverter

$27.58

Part Number:  SF-COM-11914
Brand:  SparkFun Australia

The INV133 is a simple and easy to use electroluminescent inverter from ELastoLite® that will allow you to drive any EL panel or panels with an area greater than 8in2 (and less than 20in2). The INV133 charges at 3.7V with a 1100mAh current thanks to the mini USB rechargeable Li-Poly battery enclosed in the inverter. All you need to do to start using the INV133...
We can dispatch today: - units (delivered by -)
We can dispatch in - days: - units (delivered by -)

The INV133 is a simple and easy to use electroluminescent inverter from ELastoLite® that will allow you to drive any EL panel or panels with an area greater than 8in2 (and less than 20in2). The INV133 charges at 3.7V with a 1100mAh current thanks to the mini USB rechargeable Li-Poly battery enclosed in the inverter. All you need to do to start using the INV133 is simply plug in any 4-pin 1mm spaced connector or one of the ELastoLite® over-molded connectors, press a button, and get glowing!

ELastoLite® is a waterproof electroluminescent lamp line that allows you to apply light to any article of clothing or project. Thanks to a 3-dimensional, elastomeric, membranous polymer thick film, this EL line can be applied to almost any surface with no loss to flexibility and movement.

Note: Make sure you check out the Hookup Guide below for ELastoLite® tips and instructions.

Note: This item may take longer to process due to battery installed in the equipment and therefore does not qualify for same-day shipping policy. Sorry for any inconvenience this may cause.

Includes:

  • 1x USB A to USB Mini B Cable

Documents: