Sensors & Input

SKU: AF-1083 | Brand: Adafruit

Add high-speed analog-to-digital conversion to any microcontroller with the ADS1015 breakout. This 12-bit ADC delivers 3,300 samples per second over I2C, with four single-ended or two differential input channels and a...

SKU: PI-COM0206 | Brand: Pimoroni

The MCP3008 is a 10-bit analogue-to-digital converter with eight single-ended input channels, communicating via SPI. It's a popular choice for adding analogue inputs to the Raspberry Pi and other digital-only boards —...

SKU: DF-DFR0028 | Brand: DFRobot

This is an arduino tilt sensor. It is used to detect orientation. Inside the sensor, there is a ball that make contact with the pins when the case is upright. Tilt the sensor over and the balls don't touch, thus n...

SKU: AF-2857 | Brand: Adafruit

The Adafruit Sensirion SHT31-D is a high-accuracy temperature and humidity sensor with a true I2C interface and PTFE filter for protection against dust and contaminants. Part of Sensirion's third-generation SHT sensor...

SKU: DF-SEN0629 | Brand: DFRobot

  The BME688 AI Environmental Sensor is a highly advanced MEMS sensor that combines temperature, humidity, barometric pressure, and VOC detection in a single, compact package. Featuring ±0.5°C temperature accurac...

SKU: DF-DFR1138 | Brand: DFRobot

##Introduction The RPLIDAR C1 is a new generation fusion-type DTOF (Direct Time of Flight) laser scanner from SLAMTEC. This advanced LIDAR system excels in high-definition detection of small and nearby objects, offeri...

SKU: WS-26244 | Brand: Waveshare

An RS485-controlled industrial I/O module with 8 isolated digital inputs and 8 open-drain digital outputs, communicating via the Modbus RTU protocol. Multiple protection layers — power isolation, magnetic isolation, T...

SKU: AF-5440 | Brand: Adafruit

The Adafruit Ultimate GPS Breakout with GLONASS + GPS is an enhanced version of the popular Ultimate GPS, built around the MTK3333 chipset with PA1616D module. It supports both GPS and GLONASS satellite networks, trac...

SKU: DF-SEN0500 | Brand: DFRobot

This compact multifunctional environmental sensor combines four professional sensor chips into a single breakout board: SHTC3 (temperature and humidity), BMP280 (barometric pressure), VEML7700 (ambient light), and ML8...

SKU: AF-4931 | Brand: Adafruit

This thin silvery ribbon is an interesting sensor. It's made of 2mm wide by 600mm long piezoelectric film sandwich. Piezo film can be used to detect motion or vibration - when shifted around or touched, it create...

SKU: DF-SEN0312 | Brand: DFRobot

The ME007YS is a waterproof ultrasonic distance sensor designed for non-contact liquid level measurement and other distance sensing applications. With an IP67-rated sealed probe and UART serial output, it delivers rel...

SKU: DF-SEN0295 | Brand: DFRobot

The RP-C18.3-LT is a circular flexible thin-film pressure sensor, 18.3mm in diameter, designed for highly sensitive detection of both static and dynamic force. When pressure is applied to the active area, resistance d...

SKU: SF-SEN-15440 | Brand: SparkFun

The BME280 Atmospheric Sensor Breakout measures barometric pressure, relative humidity, and temperature from a single compact board. With both Qwiic (I2C) and 0.1″ header connections, it integrates easily into Arduino...

SKU: AF-3986 | Brand: Adafruit

This T-Slot Photo Interrupter is a simple plastic sensor with two elements - an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control the IR LED and turn it on to transmit IR light acro...

SKU: AF-2340 | Brand: Adafruit

The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clip...

SKU: PL-2485 | Brand: Pololu

The Pololu Basic 2-Channel SPDT Relay Carrier provides simple, independent control of two single-pole, double-throw (SPDT) relay switches from low-voltage, low-current control signals. This assembled version comes rea...

SKU: AF-2809 | Brand: Adafruit

The Adafruit LIS3DH is a popular, low-power triple-axis accelerometer breakout packed with features typically found only on higher-end sensors. With selectable measurement ranges, multiple interface options, and built...

SKU: SF-SEN-13715 | Brand: SparkFun

This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the two ends, and making a temperature gradient between one end and the othe...

SKU: DF-SEN0170 | Brand: DFRobot

A three-cup anemometer kit with 0–5V analog voltage output for building custom weather stations and wind monitoring systems. The aluminium alloy construction provides high strength, weather resistance, and corrosion r...

SKU: AF-3295 | Brand: Adafruit

Keep track of time even when your project loses power or gets reprogrammed. The PCF8523 Real Time Clock breakout is a battery-backed RTC that communicates over I2C and works with both 3.3 V and 5 V power and logic. Pe...