Sensors & Input

SKU: LB-00158 | Brand: Little Bird

This PIR sensor is suitable for use with Arduino and Raspberry PI. The 3.3v logic level is very handy as it allows you to use this sensor with 3.3v Arduinos like the Due or Pro Mini as well as 5V like the Uno as 3....

SKU: LB-LR0230 | Brand: Little Bird

The HC-SR04 is a widely used ultrasonic distance sensor that measures distances from 2cm to 500cm (approximately 5 metres) with 1cm resolution. It works by emitting a 40kHz ultrasonic pulse, then measuring the time it...

SKU: LB-LR0040 | Brand: Little Bird

This versatile soil moisture sensor is designed for easy integration with both Arduino and Raspberry Pi projects, making it a great choice for hobbyists and developers alike. It features both analog and adjustable ...

SKU: LB-LR0001 | Brand: Little Bird

This convenient little module allows you to control both the X-axis and Y-axis using two 10k potentiometers.  Also featured is an additional pushbutton switch providing another optional input for your project....

SKU: DF-DFR0626 | Brand: DFRobot

This is an IO expansion module that based on the chip MCP23017. The module can expand additional 16 IOs. It can set 8 IIC addresses, which means with this module, the microcontroller can connect 8 modules, and expand ...

SKU: AF-189 | Brand: Adafruit

PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adjustable delay before firing (approx 2-4 seconds), adjustable sensiti...

SKU: LB-LR0051 | Brand: Little Bird

A 4-channel relay module with opto-isolated inputs for safe, reliable switching of high-power loads. Each relay is rated for up to 10A at 250VAC or 30VDC, making it suitable for controlling lights, motors, heaters, an...

SKU: DF-DFR0315 | Brand: DFRobot

FEATURESAPPLICATIONSSPECIFICATIONSNote: It has been newest Model: A1M8 --2017/5/15 DOCUMENTS SLAMTEC Website Development Kit SDK & Datasheet Related Rplidar Review by Gavin (@MechatronicsGuy) ICP-SLAM based on Rob...

SKU: AF-2717 | Brand: Adafruit

The TCA9548A 1-to-8 I2C multiplexer solves the common problem of needing multiple I2C devices with the same address on a single bus. It acts as a gatekeeper, routing I2C traffic to any of its eight downstream channels...

SKU: DF-TEL0163 | Brand: DFRobot

The A7670G is a global 4G CAT1 communication module that brings cellular connectivity to your IoT projects. With support for LTE-FDD, LTE-TDD, and GSM bands worldwide, it provides reliable data transmission at up to 1...

SKU: EC-SES90101S | Brand: Elecrow

The MQ-9 is an analog gas sensor module with high sensitivity to carbon monoxide (CO), methane, propane, and LPG. It uses an SnO2 sensing element that changes conductivity in the presence of target gases, making it su...

SKU: PI-COM0206 | Brand: Pimoroni

The MCP3008 is a 10-bit analogue-to-digital converter with eight single-ended input channels, communicating via SPI. It's a popular choice for adding analogue inputs to the Raspberry Pi and other digital-only boards —...

SKU: DF-DFR1138 | Brand: DFRobot

##Introduction The RPLIDAR C1 is a new generation fusion-type DTOF (Direct Time of Flight) laser scanner from SLAMTEC. This advanced LIDAR system excels in high-definition detection of small and nearby objects, offeri...

SKU: DF-SEN0312 | Brand: DFRobot

The ME007YS is a waterproof ultrasonic distance sensor designed for non-contact liquid level measurement and other distance sensing applications. With an IP67-rated sealed probe and UART serial output, it delivers rel...

SKU: AF-3986 | Brand: Adafruit

This T-Slot Photo Interrupter is a simple plastic sensor with two elements - an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control the IR LED and turn it on to transmit IR light acro...

SKU: PL-2485 | Brand: Pololu

The Pololu Basic 2-Channel SPDT Relay Carrier provides simple, independent control of two single-pole, double-throw (SPDT) relay switches from low-voltage, low-current control signals. This assembled version comes rea...

SKU: DF-SEN0170 | Brand: DFRobot

A three-cup anemometer kit with 0–5V analog voltage output for building custom weather stations and wind monitoring systems. The aluminium alloy construction provides high strength, weather resistance, and corrosion r...

SKU: DF-SEN0340 | Brand: DFRobot

SPECIFICATION Distance Resolution: 1cm Frequency: 100Hz Ambient Light Resistance: 70klux Detecting Range: 0.2~8m Weight: ＜5g FoV: 2° Supply Voltage: 5V±0.1V Data Interface: UART/ I²C Accuracy: ±6cm@(0.2m-3m) DOCUMENTS...

SKU: SF-SEN-15569 | Brand: SparkFun

This is the HC-SR04 ultrasonic distance sensor. This economical sensor provides 2cm to 400cm of non-contact measurement functionality with a ranging accuracy that can reach up to 3mm. Each HC-SR04 module includes an u...

SKU: AF-6413 | Brand: Adafruit

The BMP585 from Bosch is a ported barometric pressure and temperature sensor featuring a tube attachment point for differential or remote pressure measurements. It delivers exceptional precision with altitude noise as...