Raspberry Pi

SKU: PL-3753 | Brand: Pololu

The Pololu Dual G2 High-Power Motor Driver 24v14 is a Raspberry Pi expansion board that can independently control two brushed DC motors at up to 14A continuous per channel. It mounts directly onto the Pi's 40-pin GPIO...

SKU: PL-5052 | Brand: Pololu

The Motoron M2H family of dual high-power motor controller add-on boards makes it easy to control up two bidirectional, brushed DC motors with a compatible Raspberry Pi (Model B+ or newer). The M2H controllers are des...

SKU: WS-30717 | Brand: Waveshare

Add 4G LTE connectivity and GNSS positioning to your Raspberry Pi with this SIM7600NA-H HAT. It supports LTE Cat-4 data rates (up to 150 Mbps down / 50 Mbps up), phone calls, SMS, and multi-constellation satellite nav...

SKU: WS-30915 | Brand: Waveshare

Enhance your Raspberry Pi Compute Module 5's capabilities with our cutting-edge Mini Dual Gigabit Ethernet Base Board/Mini-Computer Kit – the perfect companion for all variants of CM5, enabling a wide array of network...

SKU: WS-30450 | Brand: Waveshare

Elevate your Raspberry Pi projects with the IMX462 2MP IR-CUT Camera, an advanced Starlight sensor camera designed to deliver crisp, clear images even in the lowest light conditions. With its 90° diagonal field of vie...

SKU: DF-SEN0630 | Brand: DFRobot

An 8 MP camera module for the Raspberry Pi 5, built around the Sony IMX219 sensor. It connects via the MIPI CSI 4-lane interface for higher frame rates than traditional 2-lane modules, delivering sharp 3280 × 2464 sti...

SKU: DF-SEN0633 | Brand: DFRobot

A 12.3 MP wide-angle camera module for Raspberry Pi featuring the Sony IMX378 sensor and a 190° fisheye lens. It captures high-definition images at 4056×3040 resolution, making it ideal for 360-degree panoramic views,...

SKU: DF-SEN0632 | Brand: DFRobot

##Introduction The IMX378-79 Camera Module is a cutting-edge imaging solution designed to deliver exceptional performance in industrial applications. Built with the Sony IMX378 photosensitive chip, it offers ultra-hig...

SKU: DF-FIT0997 | Brand: DFRobot

##Introduction This is a DSI adapter cable specifically designed for Raspberry Pi 5, with a length of 300mm. It allows for quick connection between Raspberry Pi 5 and older version DSI displays.The FPC cable features ...

SKU: AF-6035 | Brand: Adafruit

A 22-pin flexible flat cable (FPC) with 0.5mm pitch, 10cm in length. This A-B style cable has matching pin orientation on both ends — pin 1 on one side aligns with pin 1 on the other — making connections straightforwa...

SKU: AF-6034 | Brand: Adafruit

A compact 22-pin flexible flat cable (FPC) with 0.5mm pitch, just 5cm in length. This A-B style cable has matching pin orientation on both ends — pin 1 on one side aligns with pin 1 on the other — ideal for compact bu...

SKU: AF-6014 | Brand: Adafruit

This compact breakout board is designed for the Raspberry Pi 5 and Adafruit RP2350 boards that use an HSTX connector. These boards use a 22-pin FPC connection to carry high-speed video data over differential pairs, an...

SKU: SF-PRT-30976 | Brand: SparkFun

This fanless aluminium case gives Raspberry Pi systems a fully enclosed, passively cooled housing. The solid aluminium chassis acts as a heatsink, drawing heat away from the processor through integrated thermal pads f...

SKU: AF-6115 | Brand: Adafruit

Add a bright red 16x8 LED matrix to your Raspberry Pi with this Adafruit CharliePlex LED Matrix Display Bonnet. It sits on any Raspberry Pi computer with a 2x20 connector, giving you a compact grid of 128 charlieplexe...

SKU: SF-CAB-28269 | Brand: SparkFun

This single-port 30W PoE+ injector lets you send power and data to a PoE-enabled Raspberry Pi over one Ethernet cable. It is intended for Raspberry Pi single board computers from the Raspberry Pi 3B+ onwards, excludin...

SKU: SF-PRT-29327 | Brand: SparkFun

Build a neater, sturdier Raspberry Pi stack with this hardware kit for mounting a standard Pi HAT. It is designed for Raspberry Pi 3, 4 and 5 boards, including builds where a larger cooling fan or heat sink needs extr...

SKU: SF-CAB-28303 | Brand: SparkFun

This flat flexible cable is a compact 22-pin FPC lead for joining compatible boards and peripherals where space is tight. It has a 0.5mm pitch and a 100mm length, making it suitable for short internal connections.The ...

SKU: AF-6449 | Brand: Adafruit

Add reliable real-time clock and programmable power control to a Raspberry Pi with this HAT+ add-on board. Witty Pi 5 can define your Raspberry Pi’s on/off sequence, trigger power actions based on temperature or volta...

SKU: AF-6360 | Brand: Adafruit

This SmartiPi Touch Pro 3 enclosure is designed for the Raspberry Pi Touch Display 2, giving your touchscreen project a tidy, mountable case with room inside for extra hardware. It is compatible with Raspberry Pi 3, 4...

SKU: WS-29112 | Brand: Waveshare

Add a crisp, touch-enabled screen to your Raspberry Pi project with this 7-inch IPS DSI display from Waveshare. The 1280 × 800 panel, wide 178° viewing angle and 10-point capacitive touch make it well suited to dashbo...