Motors (DC, stepper, servo)

SKU: DF-FIT0186 | Brand: DFRobot

This is a Gear Motor w/Encoder, model No.GB37Y3530-12V-251R. It is a powerful 12V motor with a 43.8:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the m...

SKU: LB-LS0112-60 | Brand: Little Bird

The JGA25-370 is a compact 12V DC gear motor with metal gears, delivering 60 RPM at 12V. The higher gear ratio provides increased torque at lower speed, making it well-suited for applications needing slow, controlled ...

SKU: AF-169 | Brand: Adafruit

Tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos...

SKU: DF-DFR0429 | Brand: DFRobot

INTRODUCTION An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecti...

SKU: LB-LR0214-50 | Brand: Little Bird

The 42BYG is a NEMA 17 bipolar stepper motor with a shaft-reversed design, commonly used in 3D printers, CNC machines, and DIY motion-control projects. With a 1.8° step angle and 40 N·cm holding torque, it provides re...

SKU: DF-FIT0200 | Brand: DFRobot

This immersible pump can be used to water your plants, make a fountain or waterfall, even change your fish tank wter.It works quietly with the sound level under 30db. The pump has a filter inside as well as a suct...

SKU: SF-ROB-13302 | Brand: SparkFun

These are a pair of hobby gearmotors from DAGU. These gearmotors are the same ones recommended for use in the Shadow Chassis and offer a cheap and easy-to-use setup to get your wheels turning. Each Hobby Gearmotor als...

SKU: LB-LS5142-40 | Brand: Little Bird

The NEMA17 42BYGH40 Stepper Motor is a robust and reliable solution for precision motion control. With a body size of 42mm x 42mm and a length of 40mm, this stepper motor is widely used in 3D printers, CNC machines, a...

SKU: EC-CDP03051C | Brand: Elecrow

The Arduino CNC Shield V3.51 by Protoneer turns an Arduino Uno into a 4-axis CNC controller. Compatible with GRBL 0.9 firmware, it accepts Pololu-style stepper drivers (sold separately) and supports up to 4 stepper mo...

SKU: DF-DFR0332 | Brand: DFRobot

Make an air aerial propeller vessel, a cooling system, or spinning machine with this small fan module. It comes with a propeller, a 15,000 rpm motor and cable. Add flavor to your own interesting projects with this ...

SKU: SF-ROB-16413 | Brand: SparkFun

The DG01D-E is a single hobby motor with a hall speed encoder. This motor requires a voltage between 3-9V, has a gearbox ratio of 1:48 and a speed of 90RPM at 4.5V. The voltage between positive and negative is dete...

SKU: AF-2442 | Brand: Adafruit

Need to make a tiny robot? This little micro servo rotates 360 degrees fully forward or backwards, instead of moving to a single position. You can use any servo code, hardware or library to control these servos. ...

SKU: DF-FIT0521 | Brand: DFRobot

This is a metal geared DC motor w/Encoder. It is a 6V motor with a 34:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 11 counts per revolution of the motor shaft, which corresponds ...

SKU: AF-2927 | Brand: Adafruit

A Feather board without ambition is a Feather board without FeatherWings! This is the DC Motor + Stepper FeatherWing which will let you use 2 x bi-polar stepper motors or 4 x brushed DC motors (or 1 ...

SKU: SF-DEV-11008 | Brand: SparkFun

Apply 5V and be shaken by this small, but powerful vibration motor. Works great as an physical indicator without notifying anyone but the wearer. This version uses a surface mount motor which is less likely to be dama...

SKU: DF-FIT0495-A | Brand: DFRobot

A compact all-metal DC gearmotor family from DFRobot, sold here as one motor in seven gear ratios. Every version shares the same 6 V brushed motor, the same 4 mm D-shaped output shaft and the same mounting f...

SKU: AF-6104 | Brand: Adafruit

The largest fan in the 5V USB range, this 90mm cooling fan provides maximum airflow for electronics projects. Simply plug into any USB port for immediate cooling — no drivers or setup required. The USB connector can ...

SKU: DF-SER0060 | Brand: DFRobot

A high-torque digital servo with all-metal gears, an aluminium shell, and IP67 waterproof rating. Delivers up to 35 kg·cm of stall torque at 7V, making it suitable for demanding robotics applications, multi-joint mech...

SKU: EF-EF09083 | Brand: ElecFreaks

The ElecFreaks EF90D is a compact 360-degree continuous rotation digital servo designed for use with the BBC micro:bit. It operates at 3V, making it well-suited for micro:bit-powered robotics and motorised projects. T...

SKU: AF-3882 | Brand: Adafruit

What's this? A record player for ants?? Not at all! This is a DVD/CD Spindle Motor, that thing that's inside a CD or DVD player, that turns the disc around really fast. These motors have some great benefits that ma...