SparkFun
Small Stepper Motor
These small steppers are a great way to get things moving, especially when positioning and repeatability is a concern. When using a current limiting driver ...
Get notified when back in stock
These small steppers are a great way to get things moving, especially when positioning and repeatability is a concern.
When using a current limiting driver such as the Easydriver or Big Easydriver, a 12 volt power supply can be used as long as you adjust the current level to 400mA or less. If using a non current limited driver (like a L293D or an H-bridge) you will need to lower your input voltage to keep the motor current below 400mA.
This is a Bipolar motor.
Features:
- Stride Angle (degrees) : 7.5
- 2-Phase
- Rated Voltage : 12V
- Rated Current : 400mA
- 3mm Diameter Drive Shaft
- 4-Wire Cable Attached
- In-traction Torque : 100 g/cm
Documents:
Find this product in
Robotics & Motion
Small Stepper Motor Datasheet
Datasheet · 331.9 KB · Click any page to view full size
Supplier page — sparkfun.com
Supplier Description · 498.8 KB · Click any page to view full size
Related Tutorials
Free step-by-step guides
You might also like
Customers who bought this also bought
TowerPro SG90C 360 Degree Micro Servo (1.6Kg)
$8.05
Seeed XIAO RP2040 - Supports Arduino, MicroPython and CircuitPython
$13.80
RTC EEPROM Module DS3231 AT24C32
$7.55
Geared Stepper Motor 5V w/ Driver
$6.55
MG996 Servo 180° Metal Gear
$8.80
L298N Dual H-Bridge Motor Driver Board
$15.45
Motor 2040 - Quad Motor Controller
$53.35
EasyDriver Stepper Motor
$14.85
Jargon buster
Plain-language definitions for the technical terms in the product description.
- Torque
- A twisting force that causes something to rotate, usually measured in newton-metres or kilogram-centimetres. It matters when choosing motors, servos, gears, and tools because higher torque is needed to lift heavier loads, turn larger wheels, or move mechanisms without stalling.