A compact all-metal DC gearmotor family from DFRobot, sold here as one motor in seven gear ratios. Every version shares the same 6 V brushed motor, the same 4 mm D-shaped output shaft and the same mounting footprint — the only thing that changes is the gearbox, which trades speed against torque from a slow, very strong 15 RPM / 10 kg·cm right through to a brisk 357 RPM / 0.7 kg·cm.
Metal gears throughout give these a much longer life than the plastic-gearbox motors they compete with, which is why they hold up in classroom robots that get rebuilt every term. Pick the ratio by the job: high torque for lifting, driving loaded wheels and pan-tilt mechanisms; high speed for light drive wheels and anything that needs to actually get moving.
Compare the seven speeds
All seven are the same price and the same physical motor. No-load speed is measured at 6 V; torque figures are locked-rotor (stall).
| Speed |
Stall torque |
Gear ratio |
Gearbox length |
No-load current |
Weight |
SKU |
| 15 RPM | 10 kg·cm | 478:1 | 27 mm | 50 mA | 74 g | DF-FIT0495-A |
| 20 RPM | 7.5 kg·cm | 362:1 | 27 mm | 50 mA | 74 g | DF-FIT0495-B |
| 73 RPM | 2.5 kg·cm | 99:1 | 23 mm | 50 mA | 72 g | DF-FIT0495-E |
| 97 RPM | 1.9 kg·cm | 75:1 | 23 mm | 50 mA | 70 g | DF-FIT0495-F |
| 162 RPM | 1.2 kg·cm | 45:1 | 21 mm | 50 mA | 68 g | DF-FIT0495-G |
| 191 RPM | 1 kg·cm | 34:1 | 21 mm | 60 mA | 68 g | DF-FIT0495-H |
| 357 RPM | 0.7 kg·cm | 20:1 | 19 mm | 50 mA | 66 g | DF-FIT0495-I |
Which one should I pick?
| If you are building |
Choose |
| A lifting arm, winch or geared-down joint | 15 RPM · 10 kg·cm |
| A heavy mechanism that still needs to move visibly | 20 RPM · 7.5 kg·cm |
| A loaded robot chassis | 73 RPM · 2.5 kg·cm |
| A small two-wheel drive robot (the usual pick) | 97 RPM · 1.9 kg·cm |
| Quicker drive wheels that still need pull | 162 RPM · 1.2 kg·cm |
| A line-follower or light chassis that needs pace | 191 RPM · 1 kg·cm |
| The fastest option, for light loads only | 357 RPM · 0.7 kg·cm |
Shared specifications
| Rated voltage | 6 V DC |
| Operating voltage range | 2–7.5 V |
| Locked-rotor (stall) current | 0.6 A |
| Output shaft | 4 mm diameter, D-shaped flat |
| Gearbox | All-metal gear train |
| Motor type | Brushed DC, two-wire, no encoder |
| Operating temperature | −20 °C to +60 °C |
| Weight | 66–74 g depending on gearbox |
Ideal for
- Mobile robot drive wheels and robot chassis
- Pan-tilt heads, robotic arms and geared joints
- Small conveyors, actuators and automated mechanisms
- STEM and classroom robotics builds that need gears that survive the year
A note on driving them
These are plain two-wire brushed DC motors with no encoder and no built-in driver — you will need an H-bridge motor driver to run one from a microcontroller. Stall current is 0.6 A per motor, so size the driver and supply for the number of motors you are running simultaneously. If you need closed-loop speed or position control, look at the encoder versions of this motor instead.
Package contents
- 1× Metal DC Geared Motor (6 V, in the gear ratio you select)