Little Bird
Stepper Motor 42BYG
The 42BYG is a NEMA 17 bipolar stepper motor with a shaft-reversed design, commonly used in 3D printers, CNC machines, and DIY motion-control projects. With ...
Get notified when back in stock
The 42BYG is a NEMA 17 bipolar stepper motor with a shaft-reversed design, commonly used in 3D printers, CNC machines, and DIY motion-control projects. With a 1.8° step angle and 40 N·cm holding torque, it provides reliable, precise positioning.
The motor comes with a 70 cm 4-lead wire (AWG26 UL1007) for easy connection to stepper drivers like the A4988 or DRV8825.
Specifications
- Type: NEMA 17 bipolar, 2-phase
- Step Angle: 1.8° ± 5%
- Voltage: 4.2 V DC
- Current: 1.2 A per phase
- Resistance: 8.8 Ω ± 10% per phase
- Inductance: 6.0 mH ± 20% (1 kHz, 1 V rms)
- Holding Torque: 40 N·cm min
- Detent Torque: 2.6 N·cm max
- Rotor Inertia: 57 g·cm²
- Insulation Resistance: 100 MΩ min (500 V DC)
- Insulation Class: B (130 °C)
- Faceplate: 43.2 × 43.2 mm (1.7 × 1.7″)
- Lead Wire: 70 cm, 4-lead, AWG26 UL1007
Ideal For
- 3D printers and CNC machines
- Robotics and automation projects
- Camera sliders and pan-tilt rigs
Find this product in
Robotics & Motion
You might also like
Customers who bought this also bought
Geared Stepper Motor 5V w/ Driver
$6.55
Micro Servo 9g
$5.50
Adafruit Motor/Stepper/Servo Shield for Arduino v2 Kit [v2.3]
$42.35
Uno R3 - Little Bird
$19.55
Adafruit RP2040 CAN Bus Feather with MCP2515 CAN Controller
$41.60
TMC260 Stepper Motor Driver Shield For Arduino
$50.25
12v JGA25-370 DC speed reduction motor 60 RPM
$8.80
Micro:bit v2.2 Bulk 20 Pack - Board only
$513.95
Jargon buster
Plain-language definitions for the technical terms in the product description.
- DC
- DC means direct current, where electricity flows in one constant direction, as supplied by batteries, USB ports and many plug-pack power supplies. When a product specifies DC, it runs from a DC supply rather than mains AC, so you need to provide the correct voltage and polarity.
- RMS
- RMS is a way of describing the effective level of an AC signal, such as an audio output voltage. It helps compare audio output levels more meaningfully than a peak voltage number.
- Torque
- A twisting force that causes something to rotate, usually measured in newton-metres or kilogram-centimetres. It matters when choosing motors, servos, gears, and tools because higher torque is needed to lift heavier loads, turn larger wheels, or move mechanisms without stalling.