Motor Drivers and Controllers

SKU: PL-2802 | Brand: Pololu

The Pololu RC Switch with Small Low-Side MOSFET converts standard hobby RC receiver outputs into simple on/off signals. It measures incoming RC pulse widths against a configurable threshold to control an integrated MO...

SKU: PL-2753 | Brand: Pololu

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+, Pi A+, Pi 2, or Pi 3 and provides an easy and low-cost solution for driving a pair of small brushed DC motors....

SKU: DF-DRI0003 | Brand: DFRobot

This is the new version of the Sabertooth 2x10 motor controller. The Sabertooth 2X12 is one of the most versatile, efficient and easy to use dual motor drivers on the market. It is suitable for medium powered robots ...

SKU: PL-1182 | Brand: Pololu

A breakout board for the Allegro A4988 DMOS microstepping stepper motor driver with translator and overcurrent protection. It lets you control one bipolar stepper motor at up to 2 A per coil (with sufficient cooling) ...

SKU: PL-727 | Brand: Pololu

The Pololu Serial 8-Servo Controller lets you control up to eight RC servos from almost any robot controller, microcontroller, or computer with a serial port. It accepts standard RS-232 or TTL-level serial signals wit...

SKU: PL-2990 | Brand: Pololu

Overview DRV8838 Single Brushed DC Motor Driver Carrier, bottom view with dimensions. TI SN754410 (16-pin DIP) next to the #2135 DRV8835 carrier (14-pin DIP) and #2990 DRV8838 carrier (10-pin DIP) for size re...

SKU: SS-108020021 | Brand: Seeed Studio

Features Easy to use Cartoon Style mini fan Soft fan-blade to avoid injuries Built-in programmable microcontroller that uses Arduino IDE You can change the code to drive servo motors instead of DC motor Description...

SKU: YH-6000300577 | Brand: Little Bird

This expansion board is specially designed for the Uno board and can be plugged directly into the Uno board without a cable. Equipped with 4 motor interfaces, 4 servos interface, wifi camera interface, IIC interface, ...

SKU: YH-6000300083 | Brand: Little Bird

This is an expansion board suitable for two-wheel self-balancing robot car. The overall layout is reasonable, and the screw-copper holes are designed in all four corners. The Uno control board can be installed on the ...

SKU: EF-EF03007 | Brand: ElecFreaks

This 4-channel relay module allows you to control up to four independent circuits using a microcontroller such as Arduino, Raspberry Pi, or other MCU boards. Each relay channel has an LED indicator that shows the curr...

SKU: YH-6000300221 | Brand: Little Bird

The 6WD expansion board is a versatile expansion board tailored for DIY, supporting four major controllers, including Raspberry Pi, Arduino UNO, STM32 and 51 controllers. You can switch between one of them to achieve ...

SKU: YH-6000300085 | Brand: Little Bird

This is a powerful expansion board that is compatible with four major controllers: Arduino, Raspberry Pi, STM32 and 51 controllers. Meeting your every need for a robotic car, it can ensure that the onboard module reso...

SKU: PL-4760 | Brand: Pololu

This kit includes two dual-channel Hall Effect sensor boards and two 6-pole magnetic discs that can be used to add quadrature encoding to two micro metal gearmotors with extended back shafts (motors and cables are not...

SKU: M5-M012+M013+A024 | Brand: Little Bird

The M5Stack Stepmotor Module is designed for stepper motor control, capable of driving up to 3 stepper motors with GRBL firmware. Built around the MEGA328P microcontroller (pre-flashed with GRBL), it communicates with...

SKU: M5-M013 | Brand: Little Bird

Description STEPMOTOR is used for stepper motor control. It is perfect for any motion project as it can drive up to 3 Stepper motors with GRBL control. It is built with MEGA328P has been flashed&nbsp...

SKU: SF-ROB-15451 | Brand: SparkFun

The SparkFun Qwiic Motor Driver takes all the great features of the Serial Controlled Motor Driver (SCMD) and miniaturizes them, adding Qwiic ports for plug and play functionality. Boasting the same 4245 PSOC and 2-ch...

SKU: TR-ROBOBIT-MK3 | Brand: 4tronix

Mk3 is very similar to Mk2 but with all the optional extras integrated (except Talon)The Robobit Makecode package supports all versions of Robobit Mk3This little buggy can be assembled very quickly using only a screwd...

SKU: DF-DRI0044-A | Brand: DFRobot

The DFRobot 2×1.2A DC Motor Driver with Gravity Connector is a compact dual-channel motor driver based on the TB6612FNG IC. This version features standard DFRobot Gravity connectors for plug-and-play wiring with Gravi...

SKU: AF-3343 | Brand: Adafruit

The Adafruit CRICKIT FeatherWing is a robotics and electronics driver board that plugs into any Feather mainboard. It adds motor drivers, servo outputs, capacitive touch inputs, NeoPixel control, and an audio amplifie...

SKU: PI-EML-NAV2 | Brand: Pimoroni

The Navio2 Autopilot Shield for Raspberry Pi / Raspberry Pi 2 is designed both for your own custom robotic projects and as a platform for Linux version of APM (ArduPilot).Navio2 eliminates the need in multiple control...