Motor Drivers and Controllers

SKU: KI-5641 | Brand: Kitronik

Take your micro:bit robotics builds to the next level with the Kitronik All-in-one Robotics Board. This all-in-one control solution lets the BBC micro:bit drive up to 4 motors (or 2 stepper motors) and 8 servos, makin...

SKU: DF-DRI0004 | Brand: DFRobot

The Sabertooth 2X25 is a versatile dual DC motor driver capable of supplying up to 25A continuous (50A peak) per channel. Suitable for high-powered robots up to 100lbs in combat or 300lbs for general-purpose robotics,...

SKU: PL-2134 | Brand: Pololu

This is a breakout board for TI’s DRV8834 microstepping bipolar stepper motor driver. It has a pinout and interface that are nearly identical to those of our A4988 carriers, so it can be used as a drop-in replacement...

SKU: PL-2128 | Brand: Pololu

The Black Edition of the A4988 stepper motor driver carrier features a four-layer PCB for better thermal performance, allowing the A4988 to deliver approximately 20% more current than the standard two-layer (green) ve...

SKU: PL-4035 | Brand: Pololu

This compact breakout board for TI’s DRV8874 motor driver offers a wide operating voltage range of 4.5 V to 37  and can deliver a continuous 2.1 A (6 A peak) to a single bidirectional brushed DC motor. The DRV887...

SKU: MB-12040 | Brand: Makeblock

This encoder motor is capable of driving two DC motors or one encoder motor. It has 16 pins, allowing you to connect with MegaPi by simply plugging in. The motor driver IC on the board is TB6612, which is a high effic...

SKU: MM-SKU00073 | Brand: Monk Makes

The MonkMakes Servo for micro:bit board provides a really easy way to attach up to three servomotors to a BBC micro:bit. The board requires a power supply or battery pack to provide 5 or 6V to the servomotors. It incl...

SKU: AF-3093 | Brand: Adafruit

The Adafruit CRICKIT for Circuit Playground Express is a robotics and electronics driver board that bolts directly onto a Circuit Playground Express. It adds motor drivers, servo outputs, capacitive touch inputs, NeoP...

SKU: SF-WIG-13118 | Brand: SparkFun

The SparkFun Servo Trigger is a compact robotics board that simplifies control of hobby RC servo motors — no programming required. When an external switch or logic signal changes state, the board tells an attached ser...

SKU: KI-5620 | Brand: Kitronik

This board provides a simple way to add motor driving capability to a BBC micro:bit. It allows two motors to be driven with full forward, reverse & stop control. It has terminal blocks to connect four input devi...

SKU: PL-2515 | Brand: Pololu

The Pololu Dual G2 High-Power Motor Driver 18v18 Shield uses pairs of discrete MOSFET H-bridges to drive two large brushed DC motors. It has an Arduino shield form factor for direct plug-in use, and also breaks out al...

SKU: AF-970 | Brand: Adafruit

Bring in some muscle to your output pins with 8 mighty Darlingtons! This DIP chip contains 8 drivers that can sink 500mA from a 50V supply and has kickback diodes included inside for driving coils. This will let your ...

SKU: EF-EF03413 | Brand: ElecFreaks

Robit is a motherboard of smart car based on micro:bit. It is compatible with MBOT. Except for the integration of the simple and convinient RJ25 connector，motor connector and sensor on MBOT, we have extended 4 DC m...

SKU: AF-3957 | Brand: Adafruit

The Adafruit CRICKIT HAT is a robotics and electronics driver board that plugs directly onto any Raspberry Pi with a 2×20 GPIO header. It adds motor drivers, servo outputs, capacitive touch inputs, a level-shifted Neo...

SKU: TB-XC4472 | Brand: Little Bird

This versatile motor and servo controller shield for Arduino drives up to 4 bidirectional DC motors or 2 stepper motors, plus 2 servos — all from a single board. The 4 onboard H-bridges provide 0.6A per channel (1.2A ...

SKU: TB-XC4488 | Brand: Little Bird

This MOSFET driver module lets you control high-power 24V DC loads from an Arduino or other 3.3V/5V microcontroller. It accepts PWM input for variable speed or brightness control, making it ideal for driving DC motors...

SKU: SF-ROB-17590 | Brand: SparkFun

The SparkFun Qwiic Haptic Driver pairs a compact Linear Resonant Actuator (LRA) vibration motor with Dialog Semiconductor's DA7280 motor driver IC for projects that require haptic feedback. Control the vibration motor...

SKU: EC-AK55865RF | Brand: Elecrow

The Leaper Upgraded Learning Kit is a comprehensive Arduino starter kit that includes advanced modules such as an RFID reader, stepper motor driver, real-time clock, and a wide range of sensors and components. Built a...

SKU: EF-EF03009 | Brand: ElecFreaks

An 8-channel relay module operating at 5V, compatible with Arduino, Raspberry Pi, and other MCU boards (PIC, ARM, MSP430). Each relay channel has an LED indicator showing its output state, making it easy to monitor wh...

SKU: EF-EF03010 | Brand: ElecFreaks

An 8-channel relay module compatible with Arduino, Raspberry Pi, and other MCU boards (PIC, ARM, MSP430). Each relay channel has an LED indicator showing its output state, making it easy to monitor which relays are ac...