AI agents & screen readers: for a machine-readable, text-only catalogue, start at /llms.txt. Products are available as Markdown (/products.md, /products/{handle}.md) and JSON (/products.json, /products/{handle}.json).
Store

Kitronik

$40.45 |
Out of stock
No reviews yet

Take your micro:bit robotics builds to the next level with the Kitronik All-in-one Robotics Board. This all-in-one control solution lets the BBC micro:bit dr...

Get notified when back in stock

Qty
Estimated Delivery
Arrives
Disclaimer
View Markdown
Secure checkout

Take your micro:bit robotics builds to the next level with the Kitronik All-in-one Robotics Board. This all-in-one control solution lets the BBC micro:bit drive up to 4 motors (or 2 stepper motors) and 8 servos, making it the perfect foundation for a wide variety of robotics projects.

The board features 2 Dual H-Bridge Motor Driver ICs and 8 servo outputs (standard and continuous rotation), all controlled via I2C through a 16-channel driver IC. With 17 additional I/O expansion points and broken-out I2C lines, you can easily add sensors, ZIP LEDs, and other I2C-compatible devices.

Key Features

  • 4 Motor Outputs – Drive 4 standard motors or 2 stepper motors via dual H-Bridge Motor Driver ICs
  • 8 Servo Outputs – Supports both standard and continuous rotation servos
  • 17 I/O Expansion Points – All usable micro:bit pins broken out to a 2.54mm pitch link header for easy soldering
  • I2C Breakout – Pins 19 & 20 broken out for connecting additional I2C-compatible devices
  • Flexible Power Input – Power via terminal block or servo-style connector; regulated 3.3V supply powers the micro:bit directly
  • No Separate Power Needed – The board supplies regulated 3.3V to the connected micro:bit and external devices via the link header

Specifications

  • Length: 68mm
  • Width: 62mm
  • PCB Thickness: 1.6mm
  • Control Protocol: I2C via 16-channel driver IC

Ideal For

  • Robotics projects using the BBC micro:bit
  • Multi-motor and servo-driven builds
  • STEM education and classroom robotics
  • Expanding micro:bit capabilities with sensors and I2C devices

Package Contents

  • 1× All-in-one Robotics Board for BBC micro:bit
Note: A BBC micro:bit and USB cable are required (sold separately). If using the breakout pads, a soldering iron, solder, and wire cutters are also needed. The micro:bit can be inserted into the edge connector either way round.

Resources

You might also like

Customers who bought this also bought

Stella
Stella Expert

Ask me anything about this product

Jargon buster

Plain-language definitions for the technical terms in the product description.

breakout
A breakout board carries a small or fine-pitched component and brings its connections out to standard, breadboard- and header-friendly pins. Describing a part as a breakout means it can be wired into a project without soldering directly to the component's tiny contacts.
I2C
I2C is a two-wire communication bus used by many sensors and small modules. It matters because several I2C devices can share the same two wires, but each device needs a compatible address and your controller must support I2C.
motor driver
An electronic circuit that lets a low-power controller switch and control a motor that needs more current than the controller pins can safely provide. Checking motor driver support matters because pumps and motors usually cannot be connected directly to a microcontroller output.
PCB
A printed circuit board (PCB) is a board, usually rigid, with etched copper tracks that connect electronic components together without loose wiring. Components are mounted on the board and signals route between them through the copper layout.
servo
A servo is a motor with built-in position control, usually told to move to a specific angle by a control signal. It matters when you need repeatable movement, such as steering, arms, flaps, or linkages, rather than continuous spinning.
Terminal block
A terminal block is a connector that joins wires together in a neat, removable, or serviceable way, usually clamping each wire under a screw or spring instead of soldering. It makes it easier to connect, change, or service wiring without permanent joints.
Maddy, co-founder of Little Bird

Need help? We're here for you!

Hi, I'm Maddy. My team and I are ready to help with your order or any questions.