Adafruit FeatherWing OLED - 128x64 OLED Add-on For Feather - STEMMA QT / Qwiic
100 units available with a short lead time.
The Adafruit FeatherWing OLED 128x64 adds a crisp 1.3-inch monochrome OLED display and three tactile user buttons (A, B, C) to any Feather board. The 128×64 white OLED pixel array is self-emissive — no backlight needed — delivering high contrast and excellent readability in a compact form factor.
The display uses the SH1107 driver over I2C, requiring only two data pins (plus power and ground). It includes a STEMMA QT / Qwiic connector for daisy-chaining additional I2C devices, an auto-reset circuit, and a reset button. Since I2C is a shared bus, this FeatherWing stacks with most other FeatherWings without conflict.
Key Features
- 128×64 Monochrome OLED – 1.3-inch diagonal, white pixels, high contrast, self-emissive (no backlight)
- SH1107 I2C Driver – Uses only two I2C pins; Arduino library available
- Three Tactile Buttons – Labelled A, B, and C for building a mini user interface
- STEMMA QT / Qwiic Connector – Plug-and-play I2C expansion with no soldering
- Reset Button + Auto-Reset Circuit – Built into the FeatherWing
- Universal Feather Compatibility – Tested working with all Feather boards
- Stackable – Can be stacked with other FeatherWings, including other I2C FeatherWings
Ideal For
- Adding a display and basic UI to any Feather project
- Sensor readouts, status displays, and menu interfaces
- Battery-powered projects where low display power consumption matters
Package Contents
- 1× FeatherWing OLED 128×64
- 1× Set of 0.1-inch headers (unsoldered — assembly required)
Resources
- Feather Stacking Headers – For connecting FeatherWings to your Feather board
The Adafruit FeatherWing OLED - 128x64 OLED Add-on For Feather - STEMMA QT / Qwiic appears in the following collections:
