Skip to content

Adafruit NeoPixel Digital RGB LED Strip - Black 60 LED [BLACK] 2 meters

A mid-density NeoPixel strip with 60 individually addressable RGB LEDs per metre on a flexible black PCB, supplied in a 2-metre length (120 LEDs total). Each pixel offers full 24-bit colour control with only a single data pin required. Also available in a 1-metre length.

The strip is 12.5 mm wide (10 mm without casing) and comes with weatherproof sheathing. Cut lines are spaced every 1.7 cm (one LED each) for precise custom lengths. Sold by the metre from 4-metre reels.

Key Features

  • 60 RGB LEDs per Metre – Double the density of 30 LED/m strips for smoother colour transitions
  • 2-Metre Length – 120 LEDs total, ready for medium-scale installations
  • Individually Addressable – Set each LED's colour independently with 8-bit PWM per channel (24-bit colour)
  • Single-Pin Control – Only one digital output pin required; built-in PWM controller in each LED maintains colour without continuous data
  • Black Flex PCB – Blends into dark enclosures and provides high contrast when LEDs are off
  • Weatherproof Sheathing – Included protective casing (removable if not needed)
  • Chainable & Cuttable – Connect strips together or cut every 1.7 cm with wire cutters

Power Requirements

  • Voltage – 5V DC (do not exceed 6V or the strip will be damaged)
  • Max Current – ~7A at full white (36W for 2 metres)
  • Typical Current – Colourful patterns typically draw 1/3 to 1/2 of maximum
  • Recommended Supply – A 5V 10A power supply is recommended for 2+ metres
Warning: You must use a 5V DC power supply to power these strips. Do not exceed 6V or you risk destroying the entire strip.

Compatibility Notes

  • Works with Arduino (8 MHz+), Raspberry Pi, ESP32, and other fast microcontrollers
  • Requires precise 100 ns timing — not compatible with interpreted platforms (Basic Stamp, NETduino) or processors slower than 8 MHz
  • Each LED requires 3 bytes of RAM — 120 LEDs uses 360 bytes, well within Arduino Uno limits (~1,500 bytes free)
  • For processors without strict timing capability, consider DotStar LED strips which use SPI-based control

Ideal For

  • Accent and ambient lighting with smooth colour transitions
  • LED art installations and props
  • Cosplay and wearable projects
  • Under-cabinet and architectural lighting

Package Contents

  • 1× NeoPixel Digital RGB LED Strip – 60 LED/m, 2 metres, black PCB
Note: These strips come from 4-metre reels. If you order less than 4 metres, you will receive a cut piece which may or may not include a JST SM connector. If the piece comes from the end of the reel, the connector may be on the output end.

Resources

The Adafruit NeoPixel Digital RGB LED Strip - Black 60 LED [BLACK] 2 meters appears in the following collections:

SKU AF-1461-2507