All Products

SKU: DF-FIT0522

This is a metal geared DC motor w/Encoder. It is a 6V motor with a 75:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 11 counts per revolution of the motor shaft, which corresponds to 823.1 counts per revolution of the gearbox’s output shaft. Pinmap These ...

SKU: LB-LS1485

A compact 213 × 92 mm solar panel with a 12V nominal output and 2.5W power rating (approximately 208mA). Suitable for trickle-charging 12V batteries, powering small outdoor sensors, and solar-powered electronics projects. Key Features 12V Nominal Output – Compatible with 12V battery charging s...

SKU: DF-DFR0523

Gravity: digital peristaltic pump is a new product developed by DFRobot. This is a new member of our water quality monitoring devices. It is an actuator for the liquid system. DFRobot peristaltic pump integrates a PPM motor driver on the pump, this is a Gravity interface (PH2.0-3P) motor...

SKU: SF-GPS-29691 · MPN: GPS-29691

This high-performance multi-band GNSS antenna is designed for applications that need high accuracy and continuous operation. It supports GPS, GLONASS, BeiDou and Galileo constellations across multiple frequency bands, plus L-band correction services.Built to outperform standard patch antennas, it...

SKU: WS-24908

A 2.13″ four-colour e-paper display HAT from Waveshare that plugs directly onto a Raspberry Pi via the standard 40-pin GPIO header. The panel renders red, yellow, black, and white ink for vivid, attention-grabbing content — perfect for price tags, shelf labels, and low-power status displays. Unl...

SKU: AF-2262 · MPN: 2262

The Adafruit GPIO Reference Card makes it easy to identify and connect wires to the Raspberry Pi's GPIO header. This ultra-thin (0.8 mm) card slides directly onto the 2×13 GPIO header, labelling each pin by function — including I²C, UART, SPI, power, and general I/O — so you can wire up your proj...

SKU: DF-DFR1059

Arduino Opta, specially designed for PLC engineers, is a secure, easy-to-use micro PLC with industrial IoT capabilities. Opta is equipped with frequently used networks and protocols in multiple industries, and supports both Arduino sketch and standard PLC languages, including LD (Ladder Logi...

SKU: DF-DFR1057 · MPN: DFR1057

##Introduction Arduino Opta, specially designed for PLC engineers, is a secure, easy-to-use micro PLC (Programmable Logic Controller) with industrial IoT capabilities. Opta is equipped with frequently used networks and protocols in multiple industries, and supports both Arduino sketch and standar...

SKU: DF-DFR1058 · MPN: DFR1058

##Introduction Arduino Opta, specially designed for PLC engineers, is a secure, easy-to-use micro PLC with industrial IoT capabilities. Opta is equipped with frequently used networks and protocols in multiple industries, and supports both Arduino sketch and standard PLC languages, including LD (...

SKU: TB-HB6012

A sturdy black ABS plastic enclosure designed for electronics projects. This Jiffy Box features built-in PCB guides and a grid of centre-punch points for easy drilling, making it simple to create professional-looking project housings. The smooth, dimple-free finish accepts screen printing and la...

SKU: SF-PRT-18727 · MPN: PRT-18727

This high-strength acrylic gasket is made for attaching 1.2W solar panels (P124) to an enclosure or almost any other flat surface.When properly applied, it creates a waterproof and secure connection between the panel and a range of materials, including plastic and aluminium.For best results, clea...

SKU: DF-FIT0530

A CNC-machined aluminium alloy enclosure designed for the LattePanda single board computer (2G/32GB and 4G/64GB models). Features anodic oxidation surface treatment for a durable, professional finish with reserved openings for a touch panel, display, and cooling fan. The internal cavity accommod...

SKU: DF-FIT0300

This is a 2 DOF robot gripper that can be installed with 2 servos so as to control gripper opening and closing with one servo, and steering gear motion control (or rotation) with the other servo. Velocity range is 0 to 54 mm (0 to 2.13"). Total weight about 45 g. The servo slot fit most...

SKU: AF-4243 · MPN: 4243

A flexible 2.13″ monochrome e-ink display with 212 × 104 pixel resolution, delivering crisp, paper-like visuals that remain visible even with no power applied. The high-contrast black-on-white image is excellent in direct sunlight and draws zero current when static. The flexible substrate allows...

SKU: WS-24797

A 2.13″ four-colour e-paper raw display from Waveshare, capable of rendering red, yellow, black, and white — making it ideal for eye-catching price tags, shelf labels, and status indicators. Like all e-ink panels, it retains the displayed image indefinitely with no power applied and consumes ener...

SKU: AF-4687 · MPN: 4687

The Adafruit 2.13" Monochrome E-Ink Bonnet brings crisp, paper-like displays to your Raspberry Pi with no soldering required. Simply plug this pre-assembled bonnet onto any Pi with a 2×20 header and start displaying high-contrast black-and-white graphics that remain visible even with power discon...

SKU: AF-4814 · MPN: 4814

The Adafruit 2.13" HD Tri-Colour eInk FeatherWing brings electronic paper technology directly to your Feather board. Featuring a 250×122 pixel display with black, red, and white ink, this FeatherWing delivers high-contrast, daylight-readable visuals that persist even when power is completely disc...

SKU: AF-2340 · MPN: 2340

The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clips to the HAT and the other end to anything conductive (metal, fruit, vegetables,...

SKU: AF-2315 · MPN: 2315

The Adafruit PiTFT 2.2" HAT Mini Kit is a compact colour display that plugs directly onto your Raspberry Pi's GPIO header. Featuring a 2.2-inch 320×240 pixel TFT with 16-bit colour, it's perfect for use as a mini console, desktop display, image viewer, or video player — all driven over the Pi's h...

SKU: DF-DFR0412

The IO expansion shield which is special for DFRduino M0, it extends 31 general pins from M0 board, together with DFRobot typical color code 3-pin interference. This interference has sole power supply and can connect to the sensors directly, which make the shield have excellent scalability and co...