All Products
Showing 61-80 of 82 products · 18 unavailable products hidden
SAM-M8Q GNSS Receiver (Qwiic)
·
Built around the u-blox SAM-M8Q module, this compact GNSS receiver is a straightforward way to add location tracking to a project. Plug in USB-C for power and configuration, or use the Qwiic connectors for solder-free I2C integration with compatible boards.The board includes an integrated smart a...
Gravity M/F DuPont Jumper Wires with Tags - 30cm (5 Pack)
·
These labelled male-to-female DuPont jumper wires make it easier to keep track of connections in busy electronics builds. Each wire carries I2C/UART pin labelling, helping reduce mix-ups when colour coding or tiny board silkscreen is hard to read.The wire sequence is the same at both ends and fol...
Gravity 4-Pin M/M DuPont Cable with Tags - 30cm (5 Pack)
·
This 5 pack of labelled 4-pin male-to-male DuPont cables is designed to make wiring Gravity modules, breadboards and development boards clearer during prototyping. Each 30 cm cable includes printed I2C and UART pin tags on the wires, helping you identify power, ground and signal lines without rel...
Gravity 4-Pin PH2.0 to DuPont Male I2C/UART Cable Pack 30cm
·
This pack gives you 10 handy 30cm Gravity sensor cables for connecting 4-pin PH2.0 modules to breadboards, IO boards or standard DuPont-style headers.Each cable has a 4-pin PH2.0 plug connector on one end and DuPont male connectors on the other, making it useful for I2C or UART wiring in maker pr...
DFRobot GP8630N 16-bit I2C/PWM to ±10V & 4-20mA DAC Module
·
This Gravity DAC module converts I2C or PWM digital signals into stable analogue voltage or current outputs for control and automation projects. Built around the GP8630N chip, it supports output modes such as ±10V, 0-5V, 0-10V and 4-20mA, with 16-bit resolution available in I2C mode.The symmetric...
Qwiic Power Switch
·
This compact Qwiic board lets you switch power to downstream Qwiic devices so high-current modules can be turned off when they are not needed. That can help conserve energy in battery-powered builds using GNSS and other power-hungry Qwiic boards.It also provides I2C bus isolation, so slower 100kH...
GNSS Flex pHAT with LG580P RTK Heading Module
·
Add precise position and orientation data to a Raspberry Pi with this GNSS Flex pHAT and LG580P module combination. It is built for advanced navigation projects that need centimetre-level RTK positioning plus real-time heading data, such as intelligent robots, precision agriculture systems and au...
GNSS Flex Breakout Carrier Board
·
This carrier board brings the GNSS Flex ecosystem out to a practical development breakout, so you can use your chosen GNSS Flex module on a breadboard, with a flight controller, or inside a custom navigation build. The standard 2x10 male headers accept a GNSS Flex module and expose its available ...
Terminal Block BFF Add-On for QT Py and Xiao
·
This BFF add-on makes it much easier to wire up small QT Py and Xiao projects without juggling loose jumpers. Plug in a compatible board and each pin is brought out to a screw-terminal block, with an extra socket pin available for quick wire connections.It also adds a Stemma QT / Qwiic connector ...
W55RP20-EVB-Pico RP2040 Ethernet Evaluation Board
·
The W55RP20-EVB-Pico is an evaluation board for the W55RP20, a chip that combines the W5500 wired TCP/IP controller with the RP2040 microcontroller. It works much like a Raspberry Pi Pico, with the addition of W5500-based wired Ethernet.The board pinout is directly connected to the RP2040 GPIO an...
PureThermal 3 FLIR Lepton Smart I/O Board
·
Designed for FLIR Lepton Longwave Infrared (LWIR) camera cores, this board turns a compatible Lepton into a hackable thermal webcam module. It ships preconfigured as a plug-and-play UVC 1.0 USB thermal webcam for standard webcam apps, including VLC Media Player on PC, Linux, Mac and Android.The o...
Edge101 Industrial ESP32 IoT Controller
·
Built around the ESP32 dual-core processor, the Edge101 is an industrial IoT controller for taking ESP32 and Arduino-based projects beyond the workbench and into real-world automation, monitoring and edge gateway deployments.It combines isolated RS485 with Modbus compatibility, isolated CAN bus, ...
UNIHIKER K10 Plastic Protector Case
·
This protective back cover is designed for the UNIHIKER K10, helping shield the exposed back-side components from accidental contact and unexpected short circuits during classroom, workshop and maker use.The case is made from high-toughness plastic, giving the board extra protection against scrat...
20cm Male-to-Male Cable for UNIHIKER (3Pin*2 + 4Pin*1)
·
This expansion cable kit is made for connecting Gravity-style modules directly to the UNIHIKER M10 and UNIHIKER K10 mainboards. Its plug-and-play design helps you hook up sensors, actuators and displays without needing extra expansion shields.The kit includes two 20cm PH2.0-3P male-to-male cables...
Jetson Carrier Board for NVIDIA Jetson Nano & Xavier NX (Edge AI Expansion)
·
This carrier board gives NVIDIA Jetson Nano, Jetson Xavier NX and Jetson TX2 NX system-on-modules a practical base for edge AI projects. It is designed for robotics, vision systems, smart gateways and education, supporting workloads from basic image classification through to more demanding deep l...
RainbowLink V2: 4-Channel Isolated USB to Serial Converter (RS485/RS232/Dual TTL) with Built-in 12V Power Supply
·
RainbowLink V2 is a pocket-sized USB Type-C serial debugging workstation that combines four independent communication channels with useful field power outputs. It replaces multiple USB dongles for RS485, RS232 and TTL UART work, making it well suited to field engineering, IoT development and indu...
GNSS-RTK Positioning Kit with LoRa 868MHz (EU)
·
This GNSS-RTK kit is a complete base-and-rover positioning setup for projects that need centimetre-level location data. It uses Real-Time Kinematic correction, with a stationary base station sending RTCM correction data over an integrated LoRa 868MHz link to the mobile RTK unit.The system is buil...
UNIHIKER K10 + M10 AI & IoT Learning Kit
·
This UNIHIKER bundle pairs the K10 and M10 to support a progression from first AI experiments through to more advanced IoT and Python projects. The K10 is aimed at entry-level AI learning with pre-installed vision models and TinyML capability, while the M10 adds more processing power, Debian, and...
_1220x813.jpg.webp)
UNIHIKER K10 AIoT Starter Kit
·
Built around the UNIHIKER K10, this DFRobot learning kit is designed to help beginners and makers explore modern smart hardware, IoT and artificial intelligence projects in one structured package.The kit includes six distinctive modules such as a millimetre wave human presence sensor, clutch serv...
GNSS-RTK Positioning Kit with LoRa (915MHz)
·
This dual-module GNSS-RTK kit brings a base station and mobile rover together for high-precision positioning projects. It uses Real-Time Kinematics, where the stationary base station sends correction data to the moving rover to reduce common GNSS errors and deliver centimetre-level positioning.Th...
